[SwankPeRFection]

Originally Posted by Keefe

I believe those are mine! John was very good to work with. Sorry for the garage pics but the weather is uncooperative. I went with Blizzak 6 tires for winter.

Did you happen to weigh your original set vs this set? They’re like the same design, so I’m wondering why people choose that (unless they like complex and hard to clean wheels) vs something else unless there’s a considerable weight difference of ~5 lbs per corner to see a performance difference.

[Keefe]

Originally Posted by SwankPeRFection

Did you happen to weigh your original set vs this set? They’re like the same design, so I’m wondering why people choose that (unless they like complex and hard to clean wheels) vs something else unless there’s a considerable weight difference of ~5 lbs per corner to see a performance difference.

I did not weigh them. As stated these are for winter so I am not looking for a performance gain. And they look quite different from the factory 825M wheels.

[SwankPeRFection]

You sure about that? I mean “stock wheels”, clearly they’re damn near identical to the 827.

[Giak]

They are probably a hell to clean, but I really like the design. The BSPK solution gives a OEM+ look, having lower offset, wider wheel, lower weight, in a fully forged wheel.

[Vancouver_M3C]

Originally Posted by SwankPeRFection

Did you happen to weigh your original set vs this set? They’re like the same design, so I’m wondering why people choose that (unless they like complex and hard to clean wheels) vs something else unless there’s a considerable weight difference of ~5 lbs per corner to see a performance difference.

The benefit of ordering from BSPK is that you can customize it however you like. Original wheels are 19" front and 20" rear but you could have 20" front and back if you prefer. And if you normally have spacers, the custom offset means not need for which itself is some weight savings. Finally you can get a non factory color or color matched to whatever you want to go for a more machined brush. Custom means it's made to your preferences.

[MLife614]

Originally Posted by John @ BSPK

New design, will be up on the site within the next day or two. Really pleased with how this one came out. Definitely a retro aesthetic but kind of a different take on it IMHO.

Sabine Due | Brushed Titanium Satin Center, Polished Lip, Polished hardware | 20x10.5 / 20x11 | Flush Fitment | BSPK Caps

View post on imgur.com

Hey John, Me and some of my friends were wondering if This wheel is still available.... did Not see it on your website?

[Tony_M3]

Originally Posted by JTO24

So today was a good Friday, indeed as my wheels arrived!! So happy with how they turned out. SO CONCAVE! the front 19x10s are in the front and the rear 20x11s are behind them. They feel so light, too.

Really interested in these wheels in factory sizes for the G80. I saw that you said these are Hyper Silver. Are they satin or gloss? Do I need to specify somewhere on the site that I want the cutout for the M badge? Will the 19/20 option on your site fit factory tires?

[slipinslidin]

Originally Posted by JTO24

So today was a good Friday, indeed as my wheels arrived!! So happy with how they turned out. SO CONCAVE! the front 19x10s are in the front and the rear 20x11s are behind them. They feel so light, too.

Could you please share what finish you went with?

[JTO24]

Originally Posted by slipinslidin

Could you please share what finish you went with?

Gloss

[JTO24]

Originally Posted by Keefe

I believe those are mine! John was very good to work with. Sorry for the garage pics but the weather is uncooperative. I went with Blizzak 6 tires for winter.

This looks killer! 19s all around look awesome

[slipinslidin]

Originally Posted by ssilentj

Finally got around to fitting my Anikas and taking some pics. Made sure to ceramic coat and install dixcel type M brake pads as these will be a nightmare to clean.

Massive thanks to John, extremely happy with how they turned out.

20x10 +11, 20x11 +12

aIMG_9469 by ben pijpers

aIMG_9482 by ben pijpers, on Flickr

aIMG_9490 by ben pijpers, on Flickr

What paint color and finish is this?

[SwankPeRFection]

Looks like Brushed Titanium Gloss.

[John @ BSPK]

Originally Posted by slipinslidin

Could you please share what finish you went with?

Hyper silver (gloss)

Originally Posted by slipinslidin

What paint color and finish is this?

Brushed titanium (satin)

[Giak]

Originally Posted by John @ BSPK

Brushed titanium (gloss)

They look more satin than gloss

[ssilentj]

Originally Posted by Giak

They look more satin than gloss

Correct. Its satin. At least thats what i ordered

Either way, i love them!

[John @ BSPK]

Originally Posted by ssilentj

Correct. Its satin. At least thats what i ordered

Either way, i love them!

That's right. Satin. I am just getting back on my feet after a nasty flu so sorry for misquoting that. I'm glad you're enjoying them!

I am almost caught up on email/PM replies but still have a handful to get out. Everyone should be caught up by tomorrow. Additionally, normal posts should resume tomorrow.

[DNO_M3]

Originally Posted by ssilentj

Correct. Its satin. At least thats what i ordered

Either way, i love them!

I have a question regarding the brake pads, but your inbox is full.

[cronut]

Originally Posted by John @ BSPK

That's right. Satin. I am just getting back on my feet after a nasty flu so sorry for misquoting that. I'm glad you're enjoying them!

I am almost caught up on email/PM replies but still have a handful to get out. Everyone should be caught up by tomorrow. Additionally, normal posts should resume tomorrow.

Get well soon John! We'll talk wheels later this month.

[Chi-X4M]

Originally Posted by John @ BSPK

That's right. Satin. I am just getting back on my feet after a nasty flu so sorry for misquoting that. I'm glad you're enjoying them!

I am almost caught up on email/PM replies but still have a handful to get out. Everyone should be caught up by tomorrow. Additionally, normal posts should resume tomorrow.

Happy you’re doing better.

[M3anLantern]

Originally Posted by John @ BSPK

I don’t think we have had this style on here yet. This is one of my personal favorites actually. First time making it for a G8x though (love the depth). Enjoy!

Aria | Brushed Aluminum Gloss | 19x10 / 20x10.5 | Flush Fitment | OEM Cap Drill

https://imgur.com/dQOIJ1f

The Aria look amazing imo!! Would love to seem mounted on a car 🤩

[SwankPeRFection]

Originally Posted by John @ BSPK

These look nice. Are they heavy?

[John @ BSPK]

Originally Posted by SwankPeRFection

These look nice. Are they heavy?

In the realm of two piece wheels pretty normal, not the lightest two piece setup either though. They're in the ~28 range for 20x11, so marginally heavier than the OEM wheels. Two piece is always going to be heavier than monoblock.