[Daiz4yota]

Ok so this drives me crazy. When I put it in reverse the rear camera comes on which makes sense, but then when I put it into drive it stays on the rear camera! If Im going forward, I need to see the front! Any way to fix this?

[Daiz4yota]

Originally Posted by Daiz4yota

Ok so this drives me crazy. When I put it in reverse the rear camera comes on which makes sense, but then when I put it into drive it stays on the rear camera! If Im going forward, I need to see the front! Any way to fix this?

Anyone else have this happen?

[Pauldunlop13]

for how long?

mine stays on the rear cam for about 5-10secs, then turns off

[Xolinlevh]

Originally Posted by Pauldunlop13

for how long?

mine stays on the rear cam for about 5-10secs, then turns off

Same with mine, I back out of the garage and its a few seconds after driving off that it shifts back to normal

[Daiz4yota]

Originally Posted by Pauldunlop13

for how long?

mine stays on the rear cam for about 5-10secs, then turns off

Same thing. But what I mean is I want it to shift to the front camera when I shift from R to D. When parallel parking it's so annoying having to reach out and select each individual camera. Most other modern vehicles do this where it switches from rear cam to front cam when you gear shift automatically

[ash_schwin]

I notice this is a flaw in every German car I have driven / owned where there is a delay after switching from reverse to drive. However, I don't have this problem with my 6MT car!

[Daiz4yota]

Originally Posted by ash_schwin

I notice this is a flaw in every German car I have driven / owned where there is a delay after switching from reverse to drive. However, I don't have this problem with my 6MT car!

A delay? But it does switch to front eventually? my M8CC never goes to front camera

[tturedraider]

BMWs don’t automatically engage the front cameras until the PDC detects an obstacle.

[Daiz4yota]

Originally Posted by tturedraider

BMWs don’t automatically engage the front cameras until the PDC detects an obstacle.

Thats the problem. It doesnt even switch when im pulling forward towards an obstacle. The sensors go off but the camera is still stupidly showing me the rear end. makes parallel parking harder than it should be

[MMnut]

Originally Posted by tturedraider

BMWs don’t automatically engage the front cameras until the PDC detects an obstacle.

I dont think it's correct. My car switches to rear / front instantly when I reverse parking or when reverse gear engaged (i.e backing out from parking space.

In other words, it does exactly what it should. And the (front) camera turn off when I drive forward 50m or something (or speed is over 50km from memory)

[Daiz4yota]

Originally Posted by MMnut

I dont think it's correct. My car switches to rear / front instantly when I reverse parking or when reverse gear engaged (i.e backing out from parking space.

In other words, it does exactly what it should. And the (front) camera turn off when I drive forward 50m or something (or speed is over 50km from memory)

How the hell?! This is what I want. how do I get it?

[pneumodoc]

Mine used to do this, but after a software update it stopped doing so. I wonder if it was a weird safety recall issue. This was years ago though (I’m on Idrive 7, bought G20 back in April 2019, and it did it when i first bought it).

[MMnut]

Originally Posted by Daiz4yota

How the hell?! This is what I want. how do I get it?

Have you checked the box "Automatic PDC activation" in menu ?

We have several models of bimmer in the house from 2019 to 2202 (G01, G02, G82) and all have the same behavior for front /rear cameras when doing the parking. And when in traffic, if it goes really slow then the front camera would also turn on (the car thinks you are finding a parking space !)

[Daiz4yota]

Originally Posted by MMnut

Have you checked the box "Automatic PDC activation" in menu ?

We have several models of bimmer in the house from 2019 to 2202 (G01, G02, G82) and all have the same behavior for front /rear cameras when doing the parking. And when in traffic, if it goes really slow then the front camera would also turn on (the car thinks you are finding a parking space !)

Yea I have that on.

[Edi]

Is it on "Auto" like in the small pictogram in this picture?



Sometimes it was happening to me, and then I noticed it was not on Auto.

[LogicalApex]

As Edi noted the camera needs to be on “auto” for it to automatically flip between rear and front (as well as other views). That will also enable steering adaptive support for the camera as well.

My understanding is the default was Auto until the US NHTSA forced BMW to lock it to the rear camera based on US regulations.

[tturedraider]

Originally Posted by tturedraider

BMWs don’t automatically engage the front cameras until the PDC detects an obstacle.

Originally Posted by Daiz4yota

Thats the problem. It doesnt even switch when im pulling forward towards an obstacle. The sensors go off but the camera is still stupidly showing me the rear end. makes parallel parking harder than it should be

Are you saying the cameras don’t come on when an obstacle is detected or that the cameras don’t come immediately? Not coming on when an obstacle is detected indicates there is a problem. The front cameras should activate when the PDC detects an obstacle. They do not come on immediately just because you put the car in drive. That’s not how they are designed to work.

Originally Posted by MMnut

I dont think it's correct. My car switches to rear / front instantly when I reverse parking or when reverse gear engaged (i.e backing out from parking space.

In other words, it does exactly what it should. And the (front) camera turn off when I drive forward 50m or something (or speed is over 50km from memory)

Originally Posted by Daiz4yota

How the hell?! This is what I want. how do I get it?

As best as I can tell from what he wrote he’s not actually addressing your issue. He doesn’t make any mention of the front cameras engaging automatically, only that his rear camera comes on immediately when he puts the car in reverse, which is how the system is designed.

[Daiz4yota]

Originally Posted by Edi

Is it on "Auto" like in the small pictogram in this picture?



Sometimes it was happening to me, and then I noticed it was not on Auto.

Wow. I feel like a complete idiot. How did I not see the auto button?! I hit it and voila it works. It actually does kick to front camera automatically regardless of an obstacle or not. It just always goes to front or rear depending on shifter even if im not around any obstacles at all. Amazing!

[Daiz4yota]

Funny enough, it still defaults AWAY from this setting. So when I got into my car today to leave for work, it went back to not auto. So I guess you have to reach up and hit the Auto button every time you park to make it do this? Thats so odd

[MMnut]

Originally Posted by tturedraider

As best as I can tell from what he wrote he’s not actually addressing your issue. He doesn’t make any mention of the front cameras engaging automatically, only that his rear camera comes on immediately when he puts the car in reverse, which is how the system is designed.

Well, I wrote very clear front/rear camera behavior and he read it correctly. But looks like you did not read / understand it correctly.

Anyway, as others mentioned, the auto mode is also needs to be on so it switched cameras correctly. And not just front and rear cameras, depending on how close the obstacle to the car, the side camera also gets focus and turned on that side as well.

AND : this Auto mode is saved in the car, at least in my region. But I believe it is NOT in US for some reasons and may need to have coded to keep it saved.