[R44 Performance]

     Featured on BIMMERPOST.com

Hey everyone, we’re so proud to finally showcase our 1000 bhp 2022 BMW G80 M3 Competition xDrive in Individual Mexico Blue!

Many of you will have seen this car before, both online and at shows, but the car is now substantially more powerful, dyno-ing at 889 wheel-horsepower and 989 Nm Torque. Accounting for drivetrain loss through the xDrive system, this equates to roughly 1022 bhp at the crank.



In terms of drag times, we did some runs at Santa Pod Raceway here in the UK:

0-60mph = 2.04 seconds
100-200kph = 3.9 seconds
60-130mph = 4.5 seconds
¼ mile = 9.33 seconds @ 146mph

People tend to get very hung up on numbers. All we can say is, it’s a seriously fast car. At the time of posting this, it’s the fastest G8X in Europe on the Draggy App. We’re not sure for how long as we know there is a lot more still to be had from this platform. BMW has absolutely smashed it with this engine & drivetrain.

So, what setup are we running to achieve this level of performance?

The car is a PureTurbos Stage 2+ built by Tom Wrigley Performance in the UK. (You might recognise Tom from our recent single-turbo M3 Touring build). This configuration includes PureTurbos hybrid turbochargers with a built-engine. The S58’s internals are very strong from the factory but we fitted TWP drop-in conrods & APR studs. All the software was fine-tuned by Tom Wrigley Performance & Mike Ball.




To help transfer all this power to the ground, the car features a built gearbox & torque converter by Pure Drivetrain Solutions. Again, gearbox software by Tom Wrigley & Mike Ball.

To keep things cool, our G80 is running the full catalog of CSF cooling components with the stunning inlet manifold color-matched in Mexico Blue. In terms of airflow, the car has retained stock airboxes and uses PureTurbos silicone pipes supplied with the turbo. As for the exhaust setup, we installed R44 catless downpipes paired with the Grail Automotive single-midpipe & OPF-back exhaust system.






For those interested in the fueling upgrades and other hardware modifications, see the list of supporting parts below:


ID 1050cc Injectors x 6
Mike Ball Tuning - plug & play RHD harness
CAN + power splitter
Flex Fuel Kit (with filter and ethanol sensor)
ReFlex Plus™
ReFlex Plus™ mounting bracket
Motiv™ 0-10 Bar Pressure Sensor
Fuel pressure sensor fitting
Performance Fueling solutions G8X S58 BMW Full Drop in Brushless LPFP upgrade
MHD Tuning

Now, this isn’t a Hennessey Exorcist. We didn’t just throw 1000 horsepower at it and then do very little to the brakes, suspension, etc.

For handling & stability, the car benefits from the KW H.A.S suspension kit with solid front control arm bushes & adjustable rear traction arms from Suspension Secrets. We recently added the full Suspension Secrets product range to our store - they’re making some truly incredible components.




As for the brakes, we run EBC 2-piece brake discs (front & rear) with a combination of EBC Blue Stuff & RPX racing brake pads. This setup is supported with upgraded lines and Castrol React SRF brake fluid - an expensive fluid but well worth it!




We’re well aware the majority of G8X owners aren’t looking to get 1000 bhp from their car - but lots of you enjoy making your car look more aggressive & unique. Here are the aesthetic mods we went for:

The car is running the full MHC LDN pre-preg carbon low-line kit, made up of the iconic SP1 front lip, SK1 side skirts & SS1 rear side splitters. The front lip is also accompanied by the GT-style front grille & Twin Fin ducts, also manufactured by MHC LDN. This is our go-to setup for transforming the front of any G8X M3 or M4. Don’t forget the R44 CSL yellow DRLs which work surprisingly well with the Mexico Blue paintwork.





On the front fenders, you’ll notice full replacement pre-preg carbon side badges. This is a small touch that really lifts the side of the car.

To complete the rear, we opted for the MHC LDN DF1 Carbon diffuser with the integrated LED brake light + a set of OLED taillights.



Full Xpel paint protection film was also a must!

With the car having the Ultimate Pack, we already had all the lovely interior carbon including the amazing carbon fiber bucket seats. To take it to the next level, we added a full Alcantara steering wheel from SHFT with JQ Werks Madtrace magnetic paddles for more engaging shifts.



Thank you for taking the time to check out our latest project. The road to 1000bhp is officially over! Please let us know what you think of the build & feel free to share any insights from your own S58 tuning journey - we know there are plenty of big power cars across the world!

[NicolasB]

Very nice, a lot of work into that car. Can finally hang with a plaid S.

(Need to make a correction: head studs are ARP, not APR. Also, Xpel "paint" protection, unless pain protection is a thing &#128516

👍🏻

[g80.py]

Some people say it’s what’s in the inside that matters, but what an amazing car all around!

[Forzanerazzurri]

Very impressive. Tastefully done too.

[Kevin_The_Clean1]

Finally something worth clicking on... I love seeing the 9.3 time slip!

[Needsdecaf]

That car is a beast. Congrats!

[BSMG82M4]

Simply amazing!!!

[Mapper]

nice work to you and your team!

What stage Pure ZF upgrade did you end up going with?

[cfm56d7b]

This is an exemplary project for many to appreciate and hopefully follow: an increase in horsepower requires upgrading brakes, suspension, and many other components.

The car is a star.

[BlueRaven]

Damn that's fast

[MT6]

A 10 second car ultimate build

[dogballs]

Does it have CarPlay?

[Berzerker]

Originally Posted by dogballs

Does it have CarPlay?

This a legit question?

[GOLFFRR]

1000HP! dangggg

[Lady Jane]

Originally Posted by R44 Performance

Hey everyone, we’re so proud to finally showcase our 1000 bhp 2022 BMW G80 M3 Competition xDrive in Individual Mexico Blue!

Wow Wow Wow...

[GabesSlowM4]

Love the Hennessy Exorcist shade lol! In all seriousness coming from the American muscle community suspension and brakes are often overlooked smh. Whats the point of 1,000 HP if you can't ever slow down. I've seen guys in mustangs add a hellion twin turbo kit to their mustangs pushing 1,200 hp on a stock trans and brakes........trans usually lasts a week and brakes end up sending the car in a ditch.....

[Igor_M5]

Originally Posted by cfm56d7b

This is an exemplary project for many to appreciate and hopefully follow: an increase in horsepower requires upgrading brakes, suspension, and many other components.

The car is a star.

Don’t forget the turn of the world event by finally recognizing OEM intake boxes are a far more superior option to the alternatives.

Great build, YouTubr thumbnail is shot tho… putting the x over a Konni 😂

[GTP_M3]

Was there any reason in specific to keep the stock airbox?

Would there be a benefit of using different filters or upgraded intakes?

[M4nication]

You say stock air boxes, but in the pictures, those are definitely Eventuri intakes. Did you switch them back to the stock ones? Or was this a typo in the post?

[mubarak]

You forgot the price for all these modifications.
Can we know how much this build would cost ??

[Chubbiejones]

Absolutely crazy!

[GT3M2]

Wild to see what bolt ons can do!@

-GT3M2