[BMWnation]

     Featured on BIMMERPOST.com

2JZ VS. S58 BMW M analysis ��
This is awesome to see, it tell you pretty much that how you tune your engine is paramount plus how good the S58 is

[vasillalov]

Does anyone know what transmission are the RedBull brothers running on their drif cars?

[somer]

Being able to control the engine with a MoTec is probably a big advantage over the factory Bosch unit. From my understanding from the GT-R and Porsche world, the granular control you have with the MoTec's is crazy.

[BMWnation]

Originally Posted by vasillalov

Does anyone know what transmission are the RedBull brothers running on their drif cars?

They have a series of videos on YT. They use PTB clutch (more detailed video coming out) with Sonas (not sure of the spelling) but it’s super small 5 speed sequential shifter.
Have to look into more of the great box they use and options for daily use w/big power.

These guys have a great build for sure

[G MONEY]

Originally Posted by somer

Being able to control the engine with a MoTec is probably a big advantage over the factory Bosch unit. From my understanding from the GT-R and Porsche world, the granular control you have with the MoTec's is crazy.

Yes. Motec is on another planet.

[Needsdecaf]

Everyone with a stage one tune: “Boost is too high, the manifold’s gonna separate, time to spend $4,000 on an aluminum one”

Red Bull Drifting: “Here is our two year old, 1,000 HP drift car with a stock plastic manifold”

[joshviiv]

Originally Posted by BMWnation

They have a series of videos on YT. They use PTB clutch (more detailed video coming out) with Sonas (not sure of the spelling) but it’s super small 5 speed sequential shifter.
Have to look into more of the great box they use and options for daily use w/big power.

These guys have a great build for sure

Samsonas

[njoyRice]

Originally Posted by Needsdecaf

Everyone with a stage one tune: “The manifold’s gonna separate, time to spend $4,000 on an aluminum one”

Red Bull Drifting: “Here is our two year old, 1,000 HP drift car with a stock plastic manifold”

Also, funny enough CSF tested the stock intake manifold up to 40 PSI and it held fine.

Link to video

[G MONEY]

Originally Posted by Needsdecaf

Everyone with a stage one tune: “The manifold’s gonna separate, time to spend $4,000 on an aluminum one”

Red Bull Drifting: “Here is our two year old, 1,000 HP drift car with a stock plastic manifold”

Lol. Suckers are out there . My brother did the AMS carbon one on the GTR. It was more for eye candy.

[MJBO]

Originally Posted by Needsdecaf

Everyone with a stage one tune: “The manifold’s gonna separate, time to spend $4,000 on an aluminum one”

Red Bull Drifting: “Here is our two year old, 1,000 HP drift car with a stock plastic manifold”

Haha so true for so many things.

[Bucheeri90]

Saw this video of a comparison between the S58 and the 2JZ engines and the disassemble and a look inside of the 1000 HP S58 engine that the the drift brothers of redbull used for drift after 2 years of trashing it, wow the S58 is just born and it’s impressive so far.

Enjoy the video.

[Znomorph4theWin]

Very interesting. Thx for sharing.

[jmg]

If you really wanna get nerdy, here's a teardown of a B58 vs a 2JZ:

Hopefully they do something similar with an S58 or even an B58 vs an S58 and go through the differences.

[Tall Tom Cruise]

Personally I think the Gallo 24 is superior to both

[josephx66@gmail.com]

Originally Posted by Tall Tom Cruise

Personally I think the Gallo 24 is superior to both

Only until you experience the Gallo 12

[Skyscraper]

LOL.
I obviously need to freshen up on my Fast and Furious lines with you guys.

That looks like a stock intake with an added fuel rail making 1,000hp

[MT6]

Owners are modifying S58 up quiet a lot.

2JZ I think was being built up to higher boost and HP sometime before it made it into Fast & Furious 1st film Studios needed to connect with car enthusiasts audience for legitimacy of content.

[///M TOWN]

Originally Posted by Needsdecaf

Everyone with a stage one tune: “The manifold’s gonna separate, time to spend $4,000 on an aluminum one”

Red Bull Drifting: “Here is our two year old, 1,000 HP drift car with a stock plastic manifold”

That’s awesome

Yeah, I hate fear based selling

[NathObeaN]

Great, now stick it in a Supra GRMN please 😁

[///M TOWN]

Originally Posted by NathObeaN

Great, now stick it in a Supra GRMN please 😁

S58 will not fit ❕

[mike@x-ph.com]

Thank you for sharing

[NathObeaN]

Originally Posted by ///M TOWN

S58 will not fit ❕

Dude. Don’t ruin my hopes and dreams with logic and facts. Give me a big hammer and a circular saw, I’ll make it fit .