[Drozboyz]

Rogue enginering short shifter kit with new rear bushing…. Anyone that has this ssk, i URGE you to get this installed!!!!! A game changer….. this kit should come with it .

[myg80m3]

The rear mount makes the biggest difference 🙂

[evidence]

I'm grabbing the Auto Solutions SSK and was talking w the owner Ronald. I saw this Rogue mount pop up, so I asked him about them/the rear bushing.

So as a second opinion.. his comments:

The bushings [I sell] go at the front of the carrier. They give the gearbox more control over the mechanism. They are a pain in the neck to replace. At the rear I recommend rubber OEM. I believe that unless you have solid motor and gearbox mounts that firming up the rear will only rob the gearbox from its control over the shifting mechanism. If the motor mounts and gearbox mounts are solid then you can tie the whole thing together because both the drivetrain and the chassis will be moving in unison.

[Bleaus64]

bump has anybody done any changes to their shifter linkage? i’m trying to get that rubbery feel out of the shifter. thanks

[deanomytee]

Originally Posted by Bleaus64

bump has anybody done any changes to their shifter linkage? i’m trying to get that rubbery feel out of the shifter. thanks

Same here....It's not bad, but I'd like a more positive engagement.

[alpinepuggy]

Can I use this on my stock transmission?

[evidence]

Originally Posted by alpinepuggy

Can I use this on my stock transmission?

Yes, this mounts the rear of the shifter housing to the frame. I would recommend taking Ron's comments above into consideration.