[aebmw550if10]

So i recently got a steering wheel wrap, and took off the steering wheel, everything went good put the wrap on looks great, but when i reconnected the battery after about 2 days of it being disconnected, the horn stopped working, and now i have fault codes for lane keep assist and blind spot monitoring and also the cruise control doesn't work either. These are the fault codes i got any ideas what they mean?

Central gateway:

0x801C20 Read Codes
Full Central Error
Memory > Current and
Stored DTC


Camera assist (KAFAS)

0x800A07 Read Codes
Actuator Steering
Wheel Defect>current and stored DTC

Steering column:
0x803430
LIN Control Unit Power
Supply - Short Circuit
To Earth>current and stored DTC

and this (attached photo)

everything else works perfect no idea what these mean if anyone could help it would be greatly appreciated.

[Hoa]

Pull your airbag and heck your connection at the clock spring again. It may be loose. Sounds like it is not getting a signal from there

[aebmw550if10]

Originally Posted by Hoa

Pull your airbag and heck your connection at the clock spring again. It may be loose. Sounds like it is not getting a signal from there

Originally Posted by Hoa

Pull your airbag and heck your connection at the clock spring again. It may be loose. Sounds like it is not getting a signal from there

[IMG][/IMG]

Hate clips on bmws, their the most fragile things on earth and they never wanna unclip 😂 anyway figured out the problem prob going to have to replace the wire thanks for the help

[Hoa]

Use a tiny pair of needle nose pliers and try to straighten it out. You might can save it.

[aebmw550if10]

Originally Posted by Hoa

Use a tiny pair of needle nose pliers and try to straighten it out. You might can save it.

Originally Posted by Hoa

Use a tiny pair of needle nose pliers and try to straighten it out. You might can save it.

thank you so much i was able to do that and it works perfectly