[totalone]

I am planning to drop m440gc. Was wondering if anyone has done that and what spacers you used?

[Chubbiejones]

Originally Posted by totalone

I am planning to drop m440gc. Was wondering if anyone has done that and what spacers you used?

Take some time and use the search function within this forum - there are plenty of threads on this very subject.

[totalone]

Originally Posted by Chubbiejones

Take some time and use the search function within this forum - there are plenty of threads on this very subject.

Plenty of info on m340, didn't find anything on m440gc. There is a tread about if 340 springs will fit 440, forever however its abandoned.

I guess the question so stands if someone installed them on m440gc. Would also be nice if that lucky person share before and after pictures.

[Chubbiejones]

Originally Posted by totalone

Plenty of info on m340, didn't find anything on m440gc. There is a tread about if 340 springs will fit 440, forever however its abandoned.

I guess the question so stands if someone installed them on m440gc. Would also be nice if that lucky person share before and after pictures.

My apologies, I must have incorrectly interpreted M440 for M340. In my opinion I wouldn't think the installation would be radically different than a M340i. H&R provides the lowering averages for their springs so you should be able to have a pretty good idea of how the car will sit. As for spacer requirements that will base solely upon your wheel/tire setup and the aesthetic look you are trying to achieve.

[totalone]

Originally Posted by Chubbiejones

My apologies, I must have incorrectly interpreted M440 for M340. In my opinion I wouldn't think the installation would be radically different than a M340i. H&R provides the lowering averages for their springs so you should be able to have a pretty good idea of how the car will sit. As for spacer requirements that will base solely upon your wheel/tire setup and the aesthetic look you are trying to achieve.

No worries at all.
I want to keep everything stock as much as possible. I think my stock wheels will look really good with my combination. I have bicolor spike wheels that come with cooling package. just wanted to see how it will look with proper spacers.
Mike suggested anything between 12 and 15.

[totalone]

Going try and bump this up.
Was looking around little bit more on this forums but still was able to locate anyone with m440gc on hr springs.

[mike@x-ph.com]

Since there is not much info on the forums for this specific car, I recommend you start without spacers.

Let the car settle, then decide on the correct spacers for you.

[totalone]

Originally Posted by mike@x-ph.com

Since there is not much info on the forums for this specific car, I recommend you start without spacers.

Let the car settle, then decide on the correct spacers for you.

Are you suggesting installing springs and than see if I need spacers?

[mike@x-ph.com]

Originally Posted by totalone

Are you suggesting installing springs and than see if I need spacers?

Thats what i would do