[StudioRSR]

     Featured on BIMMERPOST.com

What’s going on everyone, Richard from Studio RSR here. I just wanted to give an introduction to our half cages for those that are not familiar.

Some information about our cages is that each one is built to order in house here in Southern California. Since they are made to order, each one has a 6-8 week lead time. All we need is a deposit and we can get started on production for yours.





StudioRSR has developed an outstanding rollcage / rollbar (half-cage) for the G80/G82/3/4-Series chassis to fulfill motorsport, HPDE, and track-day needs. Increased chassis rigidity and safety combined with a modern design, befit of the newer models, makes the StudioRSR M3 roll cage the premium option available in the market.

Designed and manufactured in-house, StudioRSR uses the latest manufacturing technologies to create this upgrade with **NASA Racing specifications** and wide-radius bends. There is zero metal crimping and zero tubing wall failure that is often seen from alternative roll cages. Professional installation is recommended, but installation is made easy with chromoly interlocking tubing clamps, zero welding, and all necessary hardware included. Additionally, street-spec classed vehicles can retain their rear seats if preferred. Available in-house at StudioRSR or shipped direct to you or your preferred Dealer/Installer internationally.

The development of the roll cage / roll bar came about from customer demands from StudioRSR's track/enthusiast clientele from their previous generation E36 M3 or E46 M3. With several clients and some of our own staff now licensed and racing within several NASA & SCCA Racing, HPDE, and Time Trial classes, a professional motorsport solution was needed to maintain manufacturing quality in-house. As a specific benefit, the visual aesthetic matches the aggressive, modern design of the BMW G80/G82 perfectly.

- 100% bolt-in
- Rear seat Compatible - Fits with rear seats installed
- NASA Racing spec w/straight leg version (**as of 2016.5 rulebook, not sanctioned)
- Street/HPDE spec w/Tesseract bent leg version
- 4-point half-cage, steel brackets form-fitted to the G8X chassis
- Made with latest manufacturing technologies
- Wide-Radius bends = even stress distribution, no metal crimping, & no tubing wall failure
- Designed with optimum bolt locations to factory mounting points
- Signature designed StudioRSR angled rear legs
- Proprietary designed integrated chromoly tubing clamps
- Heavy-duty DOM steel 1.75" x .120 wall thickness all-around
- Heavy-duty Chromoly steel .175" x .095 wall thickness all-around
- All Grade-8 mounting hardware included
- Installation instruction included
- This product is intended for Off-Road use only
- Product photos may vary from actual item
- StudioRSR Terms & Conditions apply (see link below to Terms & Conditions)
- 100% Made in USA
- Powdercoated in Red, White, Yellow, or Black at no additional cost

The following Custom Options are available with additional costs:
- Custom Paint/Powdercoat & Factory paint colors available
- Custom X-designs and gusseting available (Contact StudioRSR for details)
- Integrated Go-Pro & other Camera mounts.

[mike@x-ph.com]

Nice!!

[M3_Legend]

Love the look of that Yellow G80 sick

[G30 B58]

Using the NASA CCR as a guide, nice!!!

[StudioRSR]

Driver's Mod Sale has been extended until the end of April, get your orders in before it's too late!

Please feel free to reach out to me directly by email or phone and I can get you taken care of.

Email - studiorsrrichard@gmail.com
Phone - 844-991-5582

[StudioRSR]

[StudioRSR]

Last week for Driver's Mod Sale, get your deals locked in before it's too late!

[StudioRSR]

[StudioRSR]

Bump!

[Telly9987]

Do you have pictures of the half cage? Looking to retain my rear seats.

[ATar]

StudioRSR I just got a cage from my g82. It doesn’t fit. The brackets are way wider then where the cage needs to sit.

[Am3n]

Originally Posted by ATar

StudioRSR I just got a cage from my g82. It doesn’t fit. The brackets are way wider then where the cage needs to sit.

Hey ATar,

Were you able to get the fitment issue resolved?

[ATar]

Originally Posted by Am3n

Hey ATar,

Were you able to get the fitment issue resolved?

Yes. I had to rip out the the carpet to get the cage to fit. I had to trim down some of the sound absorbing foam. It was a big pain in the ass but, got it done. Their instructions and customer support is terrible though.