[StudioRSR]

What’s going on everyone, Richard from Studio RSR here. I just wanted to give an introduction to our half cages for those that are not familiar. We also have our Driver’s Mod Sale currently going on which gives deep discounts on cages (Save up to $800).

Some information about our cages is that each one is built to order in house here in Southern California. Since they are made to order, each one has a 6-8 week lead time. All we need is a deposit and we can get started on production for yours.





StudioRSR has developed an outstanding rollcage / rollbar (half-cage) for the G80/G82/3/4-Series chassis to fulfill motorsport, HPDE, and track-day needs. Increased chassis rigidity and safety combined with a modern design, befit of the newer models, makes the StudioRSR M3 roll cage the premium option available in the market.

Designed and manufactured in-house, StudioRSR uses the latest manufacturing technologies to create this upgrade with **NASA Racing specifications** and wide-radius bends. There is zero metal crimping and zero tubing wall failure that is often seen from alternative roll cages. Professional installation is recommended, but installation is made easy with chromoly interlocking tubing clamps, zero welding, and all necessary hardware included. Additionally, street-spec classed vehicles can retain their rear seats if preferred. Available in-house at StudioRSR or shipped direct to you or your preferred Dealer/Installer internationally.

The development of the roll cage / roll bar came about from customer demands from StudioRSR's track/enthusiast clientele from their previous generation E36 M3 or E46 M3. With several clients and some of our own staff now licensed and racing within several NASA & SCCA Racing, HPDE, and Time Trial classes, a professional motorsport solution was needed to maintain manufacturing quality in-house. As a specific benefit, the visual aesthetic matches the aggressive, modern design of the BMW G80/G82 perfectly.

- 100% bolt-in
- Rear seat Compatible - Fits with rear seats installed
- NASA Racing spec w/straight leg version (**as of 2016.5 rulebook, not sanctioned)
- Street/HPDE spec w/Tesseract bent leg version
- 4-point half-cage, steel brackets form-fitted to the G8X chassis
- Made with latest manufacturing technologies
- Wide-Radius bends = even stress distribution, no metal crimping, & no tubing wall failure
- Designed with optimum bolt locations to factory mounting points
- Signature designed StudioRSR angled rear legs
- Proprietary designed integrated chromoly tubing clamps
- Heavy-duty DOM steel 1.75" x .120 wall thickness all-around
- Heavy-duty Chromoly steel .175" x .095 wall thickness all-around
- All Grade-8 mounting hardware included
- Installation instruction included
- This product is intended for Off-Road use only
- Product photos may vary from actual item
- StudioRSR Terms & Conditions apply (see link below to Terms & Conditions)
- 100% Made in USA
- Powdercoated in Red, White, Yellow, or Black at no additional cost

The following Custom Options are available with additional costs:
- Custom Paint/Powdercoat & Factory paint colors available
- Custom X-designs and gusseting available (Contact StudioRSR for details)
- Integrated Go-Pro & other Camera mounts.

[StudioRSR]

Driver's Mod Sale has been extended until the end of April, get your orders in before it's too late!

Please feel free to reach out to me directly by email or phone and I can get you taken care of.

Email - studiorsrrichard@gmail.com
Phone - 844-991-5582

[StudioRSR]

Last week for Driver's Mod Sale, get your deals locked in before it's too late!

[Celticsfan34life]

Are you guys developing anything that bolts in? I am looking for a setup I can take in and out after track days so I can continue to haul my crotch goblins around!

[beachBmmr]

Originally Posted by Celticsfan34life

Are you guys developing anything that bolts in? I am looking for a setup I can take in and out after track days so I can continue to haul my crotch goblins around!

pretty sure install requires seat removal...thats an extreme amount of work for track prep...easier to keep it on the ground and not flip it!

[StudioRSR]

Originally Posted by Celticsfan34life

Are you guys developing anything that bolts in? I am looking for a setup I can take in and out after track days so I can continue to haul my crotch goblins around!

All of our cages are actually bolt-in, no welding required. It's definitely possible to install/uninstall for track days but it would be even easier with our quick disconnect brackets.

Please feel free to send me an email and I can give you more details.

StudioRSRrichard@gmail.com

Thanks for your interest!

[Celticsfan34life]

Originally Posted by StudioRSR

All of our cages are actually bolt-in, no welding required. It's definitely possible to install/uninstall for track days but it would be even easier with our quick disconnect brackets.

Please feel free to send me an email and I can give you more details.

StudioRSRrichard@gmail.com

Thanks for your interest!

Email sent!

[StudioRSR]

Bump!