[BSMG82M4]

     Featured on BIMMERPOST.com

UPDATED 2/14/24:

Final pictures before Bimmer Invasion. Results of Carbahn tune coming shortly.



















ORIGINAL POST 10/12/23:



Thanks to everyone in the forums I’m hoping to put together a combination of everyone’s favorite mods and upgrades. I’m loving where this is going. All suggestions and comments are greatly appreciated! I will post before and after pictures and a few videos of all the mods. (Tint and Carbon Fiber M Performance Wing)

[BSMG82M4]

Make and Model:
BMW G82 M4 Competition Xdrive
Color:
Black Sapphire Metallic
Interior Trim:
Fiona Red/Black Full Merino Le
Options and Packages:
EXECUTIVE PACKAGE

• Gesture Control
• Head-up Display
• Heated Steering Wheel
• Power tailgate
• Remote Engine Start

DRIVING ASSISTANCE PRO PKG

• Active Driving Assistant Pro
• Extended Traffic Jam Assistant

PARKING ASSISTANCE PACKAGE

• Drive Recorder
• Parking Assistant

[BSMG82M4]

Wheels and Tires:

Stock

• Wheels 19"/20" 826M bi-color
• Tires Michelin Pilot Sport 4S (Front: 275/35/19 Rear: 285/30/20)
• Spacers: Apex 15mm Front / 12 mm Rear

Modifications
1. BC Forged HCS21S Royal Gold, Polished Lip - 20x9.5 20x11
2. Continental Extreme Contact Sport (Front:285/30/20 Rear:295/30/20)

[BSMG82M4]

Modifications

Exterior and Cosmetic Mods:

• 3. Motorsport+ CSL Style Yellow DRL Module Set
• 4. Front Lip Protector
• 5. AUTOTECKNIC DRY CARBON LOWER FRONT BUMPER VENT
• 6. GTS Style OLED Taillights
• 7. Feral Industries Carbon Fiber Front Spoiler
• 8. M Performance Rear Spoiler
• 9. Turner Oil Cooler Skid Plate - Wrinkle Black
• 10. RW Carbon CSL Style Carbon Fiber Grille
• 11. Vorsteiner Dry Carbon Rear Diffuser w/ Gloss Finish
• 12. Autotecknic Dry Carbon Rear Diffuser Trim Set
• 13. 20% Window Tint
• 14. Alpha-N Carbon Fiber Front Hood
• 15. Covrgard PPF
• 16. Ceramic Coating
• 17. RW Dry carbon fiber mirror covers
• 18. Autotecknic Smoked sequential turn signal indicators

Performance Mods:

• 19. MODE Exhaust Valve Controller - OEM Button
• 20. Eventuri Black Carbon Intake System
• 21. Valvetronic Titanium Exhaust
• 22. Valvetronic Titanium Tips
• 23. Valvetronic single midpipe
• 24. CSF G8X 3-Piece Power Cooling Package (Black)-AIR COOLER MANIFOLD
• 25. CSF Transmission Cooler
• 26. CSF Heat Exchanger
• 27. KW H.A.S Adjustable Spring Kit
• 28. Mishimoto Hot Side Charge Pipe Kit
• 29. ISweep Front and Rear Brake Pads - IS1500
• 30. RKP Enhanced Clearance Front Liner Set

Interior Mods:

• 31. Carbon Fiber Radiator Cover
• 32. Alpha One Radio Upgrade Kit w/ Amplifier
• 33. Karbonius Carbon Fiber Strut Brace
• 34. Eventuri Black Carbon Engine Cover w/ Silver Decals
• 35. Uniden Extreme Long Range
• 36. Rennline Phone Mount and Wireless Charger
• 37. Dahler Anti-Theft Throttle Commander
• 38. P3 Multigauge w/ OBD Splitter
• 39. Future Classic x Goldenwrench Engine Cap Package - Red
• 40. BlackVue DR970X-2CH Plus 64gb MicroSD Card 4K UHD Cloud Dashcam
• BlackVue B130x Battery Pack
• 41. Custom Steering Wheel
• 42. Autotecknic Dry Carbon Air Vent Trim
• 43. Autotecknic Carbon Fiber Battery Terminal Cover

[BSMG82M4]

Parts are coming in will post final pictures when completed. Thanks to Dunnfab out of Pennsauken, NJ for making this happen!

[BSMG82M4]

Finally! This Friday first set of mods are getting installed. Will post pictures. Hoping to be done with everything by Bimmer Invasion in Orlando.

Is anyone from Philly/NJ/NY organizing a ride down? If so please hit me up.

[BSMG82M4]

Dropped off car today. SEMA is really affecting the lead times on parts. Still on the fence on how I’m going to paint the Alpha N carbon fiber hood. I’m hoping I get everything installed in time to paint, wrap and coat the car before Bimmer Invasion.

Once I recoup financially from this build, I will begin focusing on the tune and turbos. Unfortunately, they closed the ATCO drag strip by my house. Go figure, take all this time to build a worthy performance car and they close the track near my house.

Mods being installed this week:
- Motorsport+ CSL Style Yellow DRL Module Set
- Front Lip Protector
- AUTOTECKNIC DRY CARBON LOWER FRONT BUMPER VENT
- GTS Style OLED Taillights
- Feral Industries Carbon Fiber Front Spoiler
- M Performance Rear Spoiler (installed)
- Turner Oil Cooler Skid Plate - Wrinkle Black
- RW Carbon CSL Style Carbon Fiber Grille
- RKP Enhanced Clearance Front Liner Set
- Vorsteiner Dry Carbon Rear Diffuser w/ Gloss Finish
- Autotecknic Dry Carbon Rear Diffuser Trim Set
- 20% Window Tint (installed)
- Eventuri Black Carbon Intake System
- Valvetronic Titanium Exhaust with Ti Tips and single midpipe
- KW H.A.S Adjustable Spring Kit
- Carbon Fiber Radiator Cover
- Alpha One Radio Upgrade Kit w/ Amplifier
- Karbonius Carbon Fiber Strut Brace
- Eventuri Black Carbon Engine Cover w/ Silver Decals
- Uniden Extreme Long Range
- Rennline Phone Mount and Wireless Charger
- Dahler Anti-Theft Throttle Commander
- P3 Multigauge w/ OBD Splitter
- Future Classic x Goldenwrench Engine Cap Package - Red
- Downstar Deluxe Billet Hardware Kit

Still waiting on parts (round two):
- Alpha-N Carbon Fiber Front Hood (haven’t even received an estimated lead time, maybe due to SEMA)
- Dry carbon fiber mirror covers
- Smoked sequential turn signal indicators
- MODE Exhaust Valve Controller - OEM Button (taking forever)
- CSF G8X 3-Piece Power Cooling Package (Black)-AIR COOLER MANIFOLD /Transmission Cooler / Heat Exchanger (long lead)
- BC Forged HCS21S Royal Gold, Polished Lip 20x9.5 20x11 (6 week lead time)
- yellowstuff brake pads
- Covrgard PPF and Ceramic Coating

[NicolasB]

Yikes! Could have bought a Mini Cooper for the amount all those mods cost 😄 Can't wait to see the results

[BSMG82M4]

Looking for ideas on how to paint the carbon Alpha N hood. With black on black a lot of the pop is lost. With that said, the subtle carbon fiber throughout the car may look good if I keep the two stripes unpainted.

Any thoughts?

[BSMG82M4]

Originally Posted by NicolasB

Yikes! Could have bought a Mini Cooper for the amount all those mods cost 😄 Can't wait to see the results

Haha. I went a little overboard. Modding up the G82 is an addiction. When I’m done I’m going to need counseling and a second job.

[NicolasB]

Originally Posted by Koolquest

Haha. I went a little overboard. Modding up the G82 is an addiction. When I’m done I’m going to need counseling and a second job.

Don't worry, my car is currently in production and I am currently stockpiling mods in different closets so it doesn't make my wife question me too much 😄

[BSMG82M4]

Originally Posted by NicolasB

Don't worry, my car is currently in production and I am currently stockpiling mods in different closets so it doesn't make my wife question me too much 😄

That is too funny. We should start a new thread “how to spend more money on your BMW than your wife without her finding out”. Where are you on the list?

Just saw, you did the tanzanite blue G80. I love it! Can’t wait to see what you do with it.

[NicolasB]

I was posting in the Tanzanite thread, but I am actually IOMG

That would be a funny thread "BMW vs wife spending tracker" 😜

[BSMG82M4]

Originally Posted by NicolasB

I was posting in the Tanzanite thread, but I am actually IOMG

That would be a funny thread "BMW vs wife spending tracker" 😜

You are near completion! There are so many things you can do with that color. What are you planning to do?

[NicolasB]

All CF lower body trim, mirrors, grill, etc. Possibly the yellow DRLs, color-matched side markers, tint, just a basic OEM+. Same with performance mods, midpipe, intake, JB4, lowering springs and spacers. Then some stereo stuff like you are planning.

Looking forward to seeing yours come together, I ALMOST did BSM for my color, but chickened out because it's hard to keep clean 😄

[BSMG82M4]

Originally Posted by NicolasB

All CF lower body trim, mirrors, grill, etc. Possibly the yellow DRLs, color-matched side markers, tint, just a basic OEM+. Same with performance mods, midpipe, intake, JB4, lowering springs and spacers. Then some stereo stuff like you are planning.

Looking forward to seeing yours come together, I ALMOST did BSM for my color, but chickened out because it's hard to keep clean 😄

I will let you know how it turns out (What I like and don’t like.) The real fun will begin when we put these on the Dyno. I’m trying to balance this car between performance and comfort.

With respect to cleaning the BSM, it’s a daily choir. Im going to do the full PPF and Ceramic Coating.

[BSMG82M4]

Originally Posted by Koolquest

Looking for ideas on how to paint the carbon Alpha N hood. With black on black a lot of the pop is lost. With that said, the subtle carbon fiber throughout the car may look good if I keep the two stripes unpainted.

Any thoughts?

Just saw this!!! Was concerned that the carbon fiber and black would not pop, but this looks amazing.

[BSMG82M4]

Originally Posted by Koolquest

Thanks to everyone in the forums I’m hoping to put together a combination of everyone’s favorite mods and upgrades. I’m loving where this is going. All suggestions and comments are greatly appreciated! I will post before and after pictures and a few videos of all the mods. (Tint and Carbon Fiber M Performance Wing)

Before pictures. After pictures to follow.

[BSMG82M4]

Before and after GTS STYLE OLED TAIL LIGHTS

[OEM3]

amazing build so far. Can't wait to see the future mods too. I think the slightly expose CF on the hood against the black will look great. It might not "pop" in photos but in person it would be a pleasant surprise to people looking at the car.

See you at the invasion too bro!

[mdr955]

Originally Posted by Koolquest

Wheels and Tires:
BC Forged HCS21S Royal Gold, Polished Lip - 20x9.5 20x11
Gold Hardware and locking wheel bolt kit

• Any reason you went 9.5 in the front and not 10?

[BSMG82M4]

Originally Posted by mdr955

Any reason you went 9.5 in the front and not 10?

The front wheels tend to rub when you drop the car. I added an RKP front liner and went with a 9.5 wide tire to prevent the rub.