[ultradef]

Has anyone tried a 20x11 +15 square setup? I compared with a wheel fitment calculator and it would only have 1 mm less inner clearance than running the OEM rear wheels (20x10.5 +20) up front, and outer clearance is the same as those running the 20x10 +15 with a 12 mm spacer (which it seems some are doing successfully). I assume it would be tight up front (and would likely rub on the fender liners) and finding the right tire size would be key, but seems like it could potentially work. Just curious if anyone has tried it?

[JY01]

Originally Posted by ultradef

Has anyone tried a 20x11 +15 square setup? I compared with a wheel fitment calculator and it would only have 1 mm less inner clearance than running the OEM rear wheels (20x10.5 +20) up front, and outer clearance is the same as those running the 20x10 +15 with a 12 mm spacer (which it seems some are doing successfully). I assume it would be tight up front (and would likely rub on the fender liners) and finding the right tire size would be key, but seems like it could potentially work. Just curious if anyone has tried it?

I don’t have tires on my 20x10 +8, 20x11 +15 set yet but I was curious as well. The inner clearance is very tight up front, maybe around 2mm, so you would probably need a small spacer depending on how your tire sits on the wheel. The outer clearance is hard to judge without the car on the ground, but it looks similar to the 20x10 +8 wheel up front. I’d imagine if you ran a 5mm spacer for more inner clearance it would be really flush on the outside but you’d probably rub on the fender liner.

Second pic is the rear wheel up front, and third is the front.

[ultradef]

Originally Posted by JY01

I don’t have tires on my 20x10 +8, 20x11 +15 set yet but I was curious as well. The inner clearance is very tight up front, maybe around 2mm, so you would probably need a small spacer depending on how your tire sits on the wheel. The outer clearance is hard to judge without the car on the ground, but it looks similar to the 20x10 +8 wheel up front. I’d imagine if you ran a 5mm spacer for more inner clearance it would be really flush on the outside but you’d probably rub on the fender liner.

Second pic is the rear wheel up front, and third is the front.

Thanks for testing this out! Seems like a tight fit, as I expected. I’m curious how it fits with tires and with the car on the ground. I’m about to order TEs and may try it out, but if it doesn’t work it would be an expensive mistake!

[JY01]

Originally Posted by ultradef

Thanks for testing this out! Seems like a tight fit, as I expected. I’m curious how it fits with tires and with the car on the ground. I’m about to order TEs and may try it out, but if it doesn’t work it would be an expensive mistake!

Just an update, I tried bolting the 11” wheel with 295 tire on the front but the sidewall sticks out too much and hits the shock. I think you’d need at least a 5mm spacer or a narrower tire.

[Endless619]

I am running TE37s with custom offsets with a 20x10 +8 front and 20x11 +10 rears with a 275 and 295 tire and lowered front and rear and don’t rub at all. I could also run a 305 rear tire. You could probably run 295s up front in a square setup. I should have tried it but it’s flush as is. I could run a 285 front tire and wouldn’t rub as well.

You could run a 285 square tire on a 20x10 setup or 10.5 setup.

[Maximus_]

Originally Posted by Endless619

I am running TE37s with custom offsets with a 20x10 +8 front and 20x11 +10 rears with a 275 and 295 tire and lowered front and rear and don’t rub at all. I could also run a 305 rear tire. You could probably run 295s up front in a square setup. I should have tried it but it’s flush as is. I could run a 285 front tire and wouldn’t rub as well.

You could run a 285 square tire on a 20x10 setup or 10.5 setup.

Who did you order the custom offsets from and how long was the wait?

[jeegunkim]

Sneak peek.

[SwankPeRFection]

Originally Posted by jeegunkim

Sneak peek.

^^^^ Homie using a 15° nozzle on that pressure washer… 😬

[ultradef]

Originally Posted by Maximus_

Who did you order the custom offsets from and how long was the wait?

Last I checked, they had 20x10 +8 fronts in stock in black at System Motorsports. I haven’t seen that rear fitment (20x11 +10) available anywhere.

[ultradef]

Here is mine. Needs a small spacer up front at least.

[Endless619]

Originally Posted by ultradef

Last I checked, they had 20x10 +8 fronts in stock in black at System Motorsports. I haven’t seen that rear fitment (20x11 +10) available anywhere.

It’s not a US set. It’s a UK spec set.

I should be running 305 tires but I have a very steep driveway.

[jeegunkim]

Originally Posted by ultradef

Here is mine. Needs a small spacer up front at least.

I'm going to run 8mm up front and 5mm in the back. The rear can come out a bit too.

[Endless619]

Originally Posted by ultradef

Here is mine. Needs a small spacer up front at least.

Are those even real Volks? They look like the “style” versions. And that’s ok if they are. 🤙

[MVista]

Originally Posted by Endless619

Are those even real Volks? They look like the “style” versions. And that’s ok if they are. 🤙

They're legit!

[ultradef]

Originally Posted by Endless619

Are those even real Volks? They look like the “style” versions. And that’s ok if they are. ��

Funny…yes they’re real - Diamond Silver. Isn’t this the TE37 thread?

[E8x_ash]

Got matte blue gunmetal TE’s on my Model Y.. can I post that here? 😂

[HI M3]

Originally Posted by Endless619

Are those even real Volks? They look like the “style” versions. And that’s ok if they are. ��

Ouch.

Maybe it's because of the silver color, but if you look closely, you can tell they're Ultras. You can see the Volk Racing engraved into the spoke.

[Endless619]

Originally Posted by ultradef

Funny…yes they’re real - Diamond Silver. Isn’t this the TE37 thread?

Exactly. “Style” wheels should not be here and yours looked like style Volks. They just do. No big deal.

[Endless619]

Originally Posted by E8x_ash

Got matte blue gunmetal TE’s on my Model Y.. can I post that here? 😂

Nice 1991 Honda CRX SI!