What did you do to your M3/M4 today?

Mac Daddy · 01-21-2022, 07:02 PM

Quote:

Originally Posted by Custom Install

Fckin roads are like glass. Maybe I was lucky on the road to Lucerne, Wengen, Lauterbrunnen and andermatt 😎

What a beautiful part of the world that is! My SO grew up in Switzerland. We have been many times. Would love to drive my incoming G80 over there. Too bad ED is gone....

Mac Daddy · 01-21-2022, 07:05 PM

Quote:

Originally Posted by Limegrntaln

I need to get one of those lambskin finger mitts. I've had the flat incredibrush, for a few years, but I can't find anything to fit between the rotors/calipers, and the wheel. Who knew that 0.7" added to the CCBs, would make it impossible to get into the barrels, on the front wheels? I even have the EZ wheel brush, and the bristles get stuck when I try to squeeze it back behind the rotors, it sucks. I don't even think the smallest wheel woolie will fit back there. The rears dont seem to be a problem, it's just the damn front.

The CCB rotors look terrific with the infamous/notorious "gold flake" of Dravit!!

PITA cleaning them aside, would you order CCBs again? I am considering despite the $$ and reported delays....

Limegrntaln · 01-21-2022, 08:18 PM

Quote:

Originally Posted by Mac Daddy

Quote:

Originally Posted by Limegrntaln

I need to get one of those lambskin finger mitts. I've had the flat incredibrush, for a few years, but I can't find anything to fit between the rotors/calipers, and the wheel. Who knew that 0.7" added to the CCBs, would make it impossible to get into the barrels, on the front wheels? I even have the EZ wheel brush, and the bristles get stuck when I try to squeeze it back behind the rotors, it sucks. I don't even think the smallest wheel woolie will fit back there. The rears dont seem to be a problem, it's just the damn front.

The CCB rotors look terrific with the infamous/notorious "gold flake" of Dravit!!

PITA cleaning them aside, would you order CCBs again? I am considering despite the $$ and reported delays....

I would definitely order them, again. I didn't have a delay in getting my car delivered. I was 98 days from order to delivery.

Dr.Deep · 01-22-2022, 06:09 AM

Just visited my dealer for a coffee as I was near by…funny contrast in the showroom…40 years of difference

NKGK20 · 01-22-2022, 09:26 AM

Installed bms intake and roundels from IND

MannyS · 01-22-2022, 11:41 AM

Installed the front plate utilizing the Carbonio bracket. Getting stopped three times in ten days (twice in Austin and once in Houston) for no front plate was enough for me.

Soylent · 01-22-2022, 11:47 AM

Quote:

Originally Posted by NKGK20

Installed bms intake and roundels from IND

Nice. Are those the blue carbon roundels?

luckylingy · 01-22-2022, 12:32 PM

Quote:

Originally Posted by mattssi

While I generally agree, I've got it sorted with the use of a lot of the OG tools. Lambskin finger mit, Incredibrushes, and detailing brushes for the lugs, then wheel towels for final drying (after blow dry). Actually isn't too bad. Kind of therapeutic/rewarding.

I completely agree. First time I cleaned them, I wondered what I'd gotten myself into. Now, with the right tools and some practice, they're really not that bad! Blow drying ceramic coated wheels makes the drying step a WHOLE lot easier.

M_Adaptive · 01-22-2022, 02:08 PM

I’m finally getting my supersprint H pipe installed on Monday. Can’t wait to hear how it sounds compared to the videos.

Patton250 · 01-22-2022, 03:04 PM

Oh yeah!!!! Time to make the engine bay look good.

Patton250 · 01-22-2022, 03:06 PM

Quote:

Originally Posted by MannyS

Installed the front plate utilizing the Carbonio bracket. Getting stopped three times in ten days (twice in Austin and once in Houston) for no front plate was enough for me.

They must pull Florida drivers over 50,000 times a day. Yikes.

barryc365 · 01-22-2022, 03:27 PM

Quote:

Originally Posted by MannyS

Installed the front plate utilizing the Carbonio bracket. Getting stopped three times in ten days (twice in Austin and once in Houston) for no front plate was enough for me.

Man I feel Your pain!

Got pulled over and wasn't even speeding and he hit me with a fix it ticket for my very light tints at the same time…

I had the Rho Plate which looks shit, let's be honest so removed it.

Then I got the Sto N Sho which is nice because I can put it on the car when parked and if I feel like I don't want it or to take photos it's comes off in 2 seconds

The Sto N Sho doesn't look great but it's a hard one to make look right with the grill.
It's perfect for parking but it's not cool for photos or what ever

Sparky_12 · 01-22-2022, 03:35 PM

Today I bought an M4 convertible and now have to wait a couple weeks for delivery. Guess Xpel will be the first actual thing I do to it. Pretty excited!

JDUNITNOW · 01-22-2022, 06:38 PM

So far I haven't been stopped and I live in Virginia and they love tickets here. I haven't had my windows tinted yet but I am determined not to put one on.

BMWnation · 01-22-2022, 06:49 PM

Quote:

Originally Posted by Patton250

Oh yeah!!!! Time to make the engine bay look good.

This looks great, where you got this set from?

Patton250 · 01-22-2022, 07:03 PM

Quote:

Originally Posted by BMWnation

This looks great, where you got this set from?

Thanks man.

https://www.turnermotorsport.com/p-2...g82-m3-m4-s58/

'Cane · 01-22-2022, 07:09 PM

Quote:

Originally Posted by Patton250

Quote:

Originally Posted by BMWnation

This looks great, where you got this set from?

Thanks man.

https://www.turnermotorsport.com/p-2...g82-m3-m4-s58/

What is up with their site?!

Patton250 · 01-22-2022, 07:21 PM

Quote:

Originally Posted by 'Cane

What is up with their site?!

I know right. Obviously it’s a mistake because it fits that car. Its made for it.

Dhillon63 · 01-22-2022, 08:56 PM

Quote:

Originally Posted by Patton250

Oh yeah!!!! Time to make the engine bay look good.

I was thinking of hydrodipping the strut braces carbon fiber. That is when my car gets here of course😔

Patton250 · 01-22-2022, 09:23 PM

Quote:

Originally Posted by Dhillon63

I was thinking of hydrodipping the strut braces carbon fiber. That is when my car gets here of course😔

It should’ve come from the factory with what I put in it today.

NKGK20 · 01-22-2022, 11:29 PM

Installed BMS and roundels from IND

GregM4 · 01-23-2022, 02:15 AM

Quote:

Originally Posted by Patton250

Oh yeah!!!! Time to make the engine bay look good.

Patton 250 - where did you get this????? I love the brace in the F82, and been searching for a solution for the G82. First CF one I have seen to date. Look great by the way, such an improvement and gets rid of the worst part of the car, the OEM brace which comes with the car is finished so badly, or to be correct not finished.

01-22-2022, 06:09 AM	#2402
Dr.Deep Captain 1827 Rep 830 Posts Drives: M4 Competition Join Date: Aug 2017 Location: Alps iTrader: (0)	Just visited my dealer for a coffee as I was near by…funny contrast in the showroom…40 years of difference Attached Images
	Appreciate 5 HTTP 4102141.50 chicagofan0019156.50 playswcars3636.50 Patton2502939.50 Limegrntaln13477.50 Quote

01-22-2022, 09:26 AM	#2403
NKGK20 Captain 2040 Rep 744 Posts Drives: X3M , G80 on Join Date: Mar 2021 Location: California iTrader: (0)	Installed bms intake and roundels from IND Attached Images
	Appreciate 10 'Cane8540.00 bri10425943.00 m20e30871150.00 Eddie2315527.00 Asmooth0101136.00 HTTP 4102141.50 chicagofan0019156.50 Patton2502939.50 02M3ForMe4261.50 IND-Distribution9589.50 Quote

01-22-2022, 11:41 AM	#2404
MannyS Lieutenant 357 Rep 410 Posts Drives: Spouse’s M4CX convertible Join Date: Oct 2011 Location: Republic of Texas iTrader: (1)	Installed the front plate utilizing the Carbonio bracket. Getting stopped three times in ten days (twice in Austin and once in Houston) for no front plate was enough for me. Attached Images Last edited by MannyS; 01-22-2022 at 11:49 AM..
	Appreciate 3 'Cane8540.00 adr_M3368.50 Daily_drivX5M260.00 Quote

01-22-2022, 02:08 PM	#2407
M_Adaptive Lieutenant 1769 Rep 585 Posts Drives: E92 M3, 2022 G82 M4 AWD Join Date: Aug 2021 Location: Bay Area iTrader: (0)	I’m finally getting my supersprint H pipe installed on Monday. Can’t wait to hear how it sounds compared to the videos. __________________ IG: Adaptiive_M E46 M3 (Sold) E92 M3 2022 G82 M4C Xdrive
	Appreciate 1 NumberNine968.50 Quote

01-22-2022, 03:04 PM	#2408
Patton250 Colonel 2940 Rep 2,538 Posts Drives: BMW X3,M5,Turbo S Join Date: May 2021 Location: Tampa iTrader: (0)	Oh yeah!!!! Time to make the engine bay look good. Attached Images
	Appreciate 9 BMWRacer5232519.00 HTTP 4102141.50 Eddie2315527.00 Dr.Deep1827.00 bmw noob1442.50 madpistol1746.00 SimsimmaM3172.00 F80SRT695.50 RUNSOK237.00 Quote

01-22-2022, 03:35 PM	#2411
Sparky_12 Private First Class 362 Rep 198 Posts Drives: 2022 M4 Comp xDrive Convertibl Join Date: Mar 2018 Location: Atlanta iTrader: (0)	Today I bought an M4 convertible and now have to wait a couple weeks for delivery. Guess Xpel will be the first actual thing I do to it. Pretty excited!
	Appreciate 6 Scorp!on1514.50 Eddie2315527.00 MannyS357.00 rmh12213.50 02M3ForMe4261.50 Dr.Deep1827.00 Quote

01-22-2022, 06:38 PM	#2412
JDUNITNOW Colonel 3536 Rep 2,373 Posts Drives: BMW 335I, 750li, X5 G80 Join Date: Sep 2019 Location: Glen Allen, Virginia iTrader: (0)	So far I haven't been stopped and I live in Virginia and they love tickets here. I haven't had my windows tinted yet but I am determined not to put one on. __________________ Formerly Wyndi335I 2009 BMW 750li sold 14 BMW X5 04 BMW X5 11 BMW 335i convertible (sold, sellers market
	Appreciate 0 Quote

01-22-2022, 11:29 PM	#2419
NKGK20 Captain 2040 Rep 744 Posts Drives: X3M , G80 on Join Date: Mar 2021 Location: California iTrader: (0)	Installed BMS and roundels from IND Attached Images
	Appreciate 2 mzcp2690.50 Daily_drivX5M260.00 Quote