[Valvetronic Designs]

Originally Posted by LeRoy

Thanks for the response guys.
One more question that I can think of now.

In the titanium system, looks like the exhaust tips used to be slightly canted from one another. Is that still the case or are they in line now?

The rear section has tons of adjustability and movement. As it is assembled in multiple different pieces, it's a puzzle of getting the tips aligned to your desired look. Tips can be angled up or staggered or in line perfectly. The perfect look is achievable, all depending on your preference!

[LeRoy]

Originally Posted by Valvetronic Designs

The rear section has tons of adjustability and movement. As it is assembled in multiple different pieces, it's a puzzle of getting the tips aligned to your desired look. Tips can be angled up or staggered or in line perfectly. The perfect look is achievable, all depending on your preference!

Excellent. Thanks for the replies.

[Valvetronic Designs]

Originally Posted by LeRoy

Excellent. Thanks for the replies.

Happy to help brother, we look forward to earning your support.

[anakratis]

Originally Posted by LeRoy

Thanks for the response guys.
One more question that I can think of now.

In the titanium system, looks like the exhaust tips used to be slightly canted from one another. Is that still the case or are they in line now?

This is just the way people decide to mount their outlets/tips. There's quite a bit of flexibility in the rear box, you can customize how far the tips stick out, how canted they are, etc etc.

Edit: I just saw Valvetronic already responded. RIP.

[Valvetronic Designs]

Originally Posted by anakratis

This is just the way people decide to mount their outlets/tips. There's quite a bit of flexibility in the rear box, you can customize how far the tips stick out, how canted they are, etc etc.

Edit: I just saw Valvetronic already responded. RIP.

great minds do think alike

[anakratis]

I just pre-ordered the SS eq. length full exhaust. Anyone have thoughts on SS vs. Ti? I'm wondering if the Ti might be too raspy, but I'm also trying to go for loud

[Valvetronic Designs]

Originally Posted by anakratis

I just pre-ordered the SS eq. length full exhaust. Anyone have thoughts on SS vs. Ti? I'm wondering if the Ti might be too raspy, but I'm also trying to go for loud

Can't wait for you to enjoy!

[anakratis]

Originally Posted by Valvetronic Designs

Can't wait for you to enjoy!

Okay, I might be looking at the titanium. Is there any way to request to not have the pipes/muffler pre-burned? I'd like the purple/blue hues on the burned Ti to not be so prominent since it's not the best combo on IOMG

[LeRoy]

Just ordered mine thru a local’ish shop!

Titanium equal length. I can’t tell if I’m excited or nervous. Just want it to sound and look good.

All I know for sure is the stock is too quiet.

[Valvetronic Designs]

Enjoyment comes guaranteed! We are super excited for you to enjoy this new set up🤘

[zero21]

Originally Posted by LeRoy

Just ordered mine thru a local’ish shop!

Titanium equal length. I can’t tell if I’m excited or nervous. Just want it to sound and look good.

All I know for sure is the stock is too quiet.

Myself and others will be following this! Please keep us updated.

[njoyRice]

Sounds good! This maybe the mid-pipe I've been looking for the pair with my catless DP.

Valvetronic Designs any under-belly shots of the system installed? Want to see what the clearance around the pipe looks like. As I might have a resonator or gesi cat welded in. Which I feel like will help cut down those really high frequencies of the exhaust one you have a free flowing DP.

[Valvetronic Designs]

There is a lot of maneuverability in the Fitment of the midpipe, you will be able to fit a resonator or a cat in the center section. Take a look at this install guy we made, this will give a lot more angles to see what the spacing looks like.


https://youtu.be/0wpjSUXVG2Y

[anakratis]

So the valve controller... what's the closed setting? Is it like Dahler where "closed" just means OEM operation (ideal)?

[Valvetronic Designs]

100% binary. Either fully opened or fully closed. There’s no interaction from the car as ECU to the exhaust valves. You could run the car up to the red line with the valves closed if you see fit.

[anakratis]

Originally Posted by Valvetronic Designs

100% binary. Either fully opened or fully closed. There’s no interaction from the car as ECU to the exhaust valves. You could run the car up to the red line with the valves closed if you see fit.

Just upgraded my order to Titanium. Looking forward . The black tips that come with the axle back portion are double-walled per pics, correct?

[Valvetronic Designs]

Originally Posted by anakratis

Just upgraded my order to Titanium. Looking forward . The black tips that come with the axle back portion are double-walled per pics, correct?

The black tips are single wall, if your going with titanium we recommend going with the titanium tips. It’s a very unique look and shows that you have the best and most exclusive exhaust package!

[njoyRice]

Placed my pre-order through XPH for stainless steel. Excited for it to come soon!

[LeRoy]

Originally Posted by Valvetronic Designs

The black tips are single wall, if your going with titanium we recommend going with the titanium tips. It’s a very unique look and shows that you have the best and most exclusive exhaust package!

I ordered 4 in titanium.

Those are not angled correct?

[anakratis]

Originally Posted by Valvetronic Designs

The black tips are single wall, if your going with titanium we recommend going with the titanium tips. It’s a very unique look and shows that you have the best and most exclusive exhaust package!

FYI, on your page when you select black tips, it shows double walled black tips.

[Valvetronic Designs]

Originally Posted by LeRoy

I ordered 4 in titanium.

Those are not angled correct?

Correct, straight cut

[LeRoy]

Alright. It’s April. Let’s get these things out!