[Aalfred]

Originally Posted by RUNSOK

Hi sorry to resurrect the old topic but can you or anyone tell me how to disconnect wire from the oem module. I can't get them separated. All videos I watch, it disconnects with no effort one small pull. It is a 2024 g82 not that it would make any difference I don't think. Do I have to pull really hard or is there a trick to this. One simple install becomes a major headache.

thanks

I agree with u, It was really hard to pull it apart. I used a needle nose pliers to pull them apart but did damage the small plastic lip. Otherwise its really hard to pull them apart. There doesnt seem to be a small tab that u press to release them. If u use pliers, be sure to put a small cloth and hold it to avoid scratches and stay far away from the little lip. Even if its broken, the inside connectors r fine and they will still work.

[RUNSOK]

Originally Posted by Aalfred

I agree with u, It was really hard to pull it apart. I used a needle nose pliers to pull them apart but did damage the small plastic lip. Otherwise its really hard to pull them apart. There doesnt seem to be a small tab that u press to release them. If u use pliers, be sure to put a small cloth and hold it to avoid scratches and stay far away from the little lip. Even if its broken, the inside connectors r fine and they will still work.

I managed to get them out. My fingers are still sore. Lol. Yours looks great by the way!!

[smuttana]

Just installed on the front and rear doors on my M3 and made a video for those interested or needing help on the process!