[mike@x-ph.com]

Originally Posted by BMdoubleUTIFUL

I plan on getting it on a lift and taking dozens of pictures and video showing that any manipulation still puts it way off from fitting and functioning. If they pay for the modification then fantastic or if they want to send me another one, even better

Let us know how it goes

[BMdoubleUTIFUL]

Gave it another attempt on jacks and jack stands, and was able to just barely get it on enough to where there is no exhaust leak. The midpipe exhaust hanger bolt would still not reach the mounting point so I got sick of it and drilled a hole so that it would hold at an angle. It was too close to make an adapter plate out of metal but too far to make it fit where it was supposed to go. So I mounted it crooked.

Worked my way through the v-split pipe and the single pipes with exhaust hangers. Then I attempted to install the valve actuators onto the rear muffler section. Turns out the rotation of the springs do not match up either.

I'm really tired of having to make things fit and figure things out when I pay for a full kit that was on a 6 week pre-order. All I'm asking for is fitment

[mike@x-ph.com]

Originally Posted by BMdoubleUTIFUL

Gave it another attempt on jacks and jack stands, and was able to just barely get it on enough to where there is no exhaust leak. The midpipe exhaust hanger bolt would still not reach the mounting point so I got sick of it and drilled a hole so that it would hold at an angle. It was too close to make an adapter plate out of metal but too far to make it fit where it was supposed to go. So I mounted it crooked.

Worked my way through the v-split pipe and the single pipes with exhaust hangers. Then I attempted to install the valve actuators onto the rear muffler section. Turns out the rotation of the springs do not match up either.

I'm really tired of having to make things fit and figure things out when I pay for a full kit that was on a 6 week pre-order. All I'm asking for is fitment

Im sorry to hear about all the trouble you are going through with this part

[barryc365]

Originally Posted by madmedman

I think the valve controller really makes it come alive. With the valves fully open, it sounds much louder and deeper. It’s like a mute getting their voice back. I know the controller only allows for maximum sound and not necessarily more sound, if I am explaining it properly. But even spirited driving at the redline with oem button doesn’t make it sound half as loud.
I would have just wired the valves open full time if it were not to keep my neighbours happy. It is about 70% louder when valves fully open I really love the warm start.

Of subject but is there any way to open the valves with the controller before starting the engine?

I think when you order the controller you have to choose the one where the default setting is open and then you would press the button to close

[BMdoubleUTIFUL]

I was told to heat the spring up and bend it. I feel like I'm part of their r&d or quality control team at this point. And not a word of assisting to pay or replace any of these parts that have been shown not fitting.

[madmedman]

Originally Posted by barryc365

I think when you order the controller you have to choose the one where the default setting is open and then you would press the button to close

Yea, I think I should have gone with default open rather than auto. I am guessing there is no way to change that other than getting a new controller? I also saw a video with someone on their f82 opening and closing their valves with this before starting their car. Not sure how they did it.

[mike@x-ph.com]

Originally Posted by madmedman

Yea, I think I should have gone with default open rather than auto. I am guessing there is no way to change that other than getting a new controller? I also saw a video with someone on their f82 opening and closing their valves with this before starting their car. Not sure how they did it.

Default open is the most common option.

You'll need to send it back to CG to reprogram it.

[madmedman]

Hello.
Sorry for resurrecting this thread.
So I had to go for my first service. Took my vt midpipe off. Not an easy job. But finally did it. Took a few hours and a lot of wd40. Went back to stock as the remus was already sold.

So I was a bit nervous about putting this back on because of previous hardships. And after hours and hours of trying and trying every angle, the damn thing won't sit flush.

I really don't want to drive four hours to the shop that put it back on last time. And this thing would happen again. Should I contact valvetronic and request another front section or buy it from them. Do you think I have a valid argument to request a replacement?

[LuckyBrand]

Originally Posted by madmedman

Hello.
Sorry for resurrecting this thread.
So I had to go for my first service. Took my vt midpipe off. Not an easy job. But finally did it. Took a few hours and a lot of wd40. Went back to stock as the remus was already sold.

So I was a bit nervous about putting this back on because of previous hardships. And after hours and hours of trying and trying every angle, the damn thing won't sit flush.

I really don't want to drive four hours to the shop that put it back on last time. And this thing would happen again. Should I contact valvetronic and request another front section or buy it from them. Do you think I have a valid argument to request a replacement?

It can't hurt to try man. They've owned up to the issues and you've got an older version before the fix.

So you got rid of the Remus? I know you weren't sure on it. Are you gonna try something else?

[madmedman]

Originally Posted by LuckyBrand

It can't hurt to try man. They've owned up to the issues and you've got an older version before the fix.

So you got rid of the Remus? I know you weren't sure on it. Are you gonna try something else?

Thanks. I have sent them an email and hope they will be able to help.

I am really looking for a replacement. But I will go for downpipes first before going foe an axleback. Vt midpipe is going to stay. To be honest, the mpe is so ridiculous looking that I am likely going to end up buying it provided it gets the best out of the vt midpipe (the stock muffler does, for some reason). There is also a local brand in the UK, scorpion exhaust, cheaper than remus and provided it compliments the vt midpipe, it's also a viable (cheaper) option.

[Allerum]

Are you aware that they posted that they had a jig issue and had to realign it? I think they were asking to get replies on people with issues. Apparently some batches got sent out wrong. Also they have added a flex joint. This is really just a pipe though, and any muffler shop can cut and move any part of it unless you have the titanium version.

[mike@x-ph.com]

Originally Posted by Allerum

Are you aware that they posted that they had a jig issue and had to realign it? I think they were asking to get replies on people with issues. Apparently some batches got sent out wrong. Also they have added a flex joint. This is really just a pipe though, and any muffler shop can cut and move any part of it unless you have the titanium version.

I spoke to them earlier this week and they have fixed their jig and are now starting to make the new version

[ROBERT1183]

Originally Posted by mike@x-ph.com

I spoke to them earlier this week and they have fixed their jig and are now starting to make the new version

hoping to see mine in a few weeks

[mike@x-ph.com]

Originally Posted by ROBERT1183

hoping to see mine in a few weeks

[Purekoryo]

Can you get the VT titanium cat back with black tips to cover the natural blue tint? The tips they have now looks tacky.

[tac3331]

My titanium catback just shipped from x-ph. Should be the updated version everyone been waiting on.

[R44 Performance]

Originally Posted by barryc365

In the UK you guys have OPF filters and stuff that we don't have in the USA, I think you need a European version of the mid pipe. Maybe ask Valvetronic but I think you might have an issue with this. Being a US based company I doubt they have made a European version yet

I know R44 performance are in the UK and have US/UK versions of stuff, as do Supersprint who are based in Italy

Even if this did fit, you would get an error code on your dash without the OPF version I believe. I would probably try ask Valvetronic to take it back or see if they have a solution, or try sell it to someone on here in the USA

Our system is a straight bolt on and doesn't require any cutting. It was key when developing the system to make it as OE as possible in regards to fitting. If anyone has any questions feel free to shoot me a message over.

[mike@x-ph.com]

Originally Posted by tac3331

My titanium catback just shipped from x-ph. Should be the updated version everyone been waiting on.

[ROBERT1183]

Originally Posted by mike@x-ph.com

Mine arrived yesterday. Thanks Mike!!!! Will be going on the 20th. Will post a review with some pics and sound clips.

[LuckyBrand]

Originally Posted by ROBERT1183

Mine arrived yesterday. Thanks Mike!!!! Will be going on the 20th. Will post a review with some pics and sound clips.

Awesome! I am waiting for mine to ship out as well from Extreme. I ordered January 29th so hopefully soon! I messaged Valvetronic yesterday but didn't here back yet. I'm chomping at the bit cause nice weather is just about here to enjoy the new sound and I want to get it installed!

Let us know about your install experience with the new hopefully resolved fitment issues.

[ROBERT1183]

Originally Posted by LuckyBrand

Awesome! I am waiting for mine to ship out as well from Extreme. I ordered January 29th so hopefully soon! I messaged Valvetronic yesterday but didn't here back yet. I'm chomping at the bit cause nice weather is just about here to enjoy the new sound and I want to get it installed!

Let us know about your install experience with the new hopefully resolved fitment issues.

Will do!! Wasnt expecting it to show up yet but got a shipping notification and sure enough it showed up last night.

[Digitalfujjjrel]

Originally Posted by mike@x-ph.com

Mike do you know if valvetronic is helping out the people that were affected by the fitment issues? My friend sent them pictures but nothing so far.