[dimab0]

Originally Posted by Alvinggg

For all the other LaMaster modules, i can find everything, but in this KAFAS part, i just can't find any one of this codes, any idea?
i'll get a screenshoot tomorrow as i did this before but i just can't find all these codes

Were you able to find any of the KAFAS codes? I don't see any either, after going through all of the FDL (.ncd) files.

[dimab0]

Originally Posted by Alvinggg

I think they should be in CAFD 40F9, but all I found are numbers…..
I even tried 40F8, same results

Did you find this? Fwiw, my two KAFAS FDL files are 4101 and 4102. Not sure why they don't match what you see.

[BMWM4CX]

Any of you guys know where I can get hold of the latest full psdzdata files please?

[dimab0]

Originally Posted by andywaddyF56

Any of you guys know where I can get hold of the latest full psdzdata files please?

I messaged shawnsheridan to get a download link. I think this is the best way to get it.

[dimab0]

So, went through the coding but would love to check some of the FDL parameters manually to make sure they are changed. Unfortunately I can't find any of the KAFAS param names mentioned. Have searched everywhere. Can anyone walk me through where I should see these? I load any ncd file in the FDL viewer, (my two KAFAS cafd files are 4101 and 4102) but there is no discernable parameter name, just variety of numbered folders.

[Almaretto]

Originally Posted by Barathon

Almaretto Have you coded any Gx recently and can you confirm or deny if there are new security features blocking coding?

What launcher are you using and would you be able to share it? PM me if you can please, I'd be interested in getting it as long as it works with G series, specifically for the G80 and G26. Thanks

The only cars I have yet to code are the new i4 and ix. No issues otherwise. Problem is that there is no other solution currently available beside chinese Esysplus, which I refuse to use.

[hockeygoalie35]

Originally Posted by Almaretto

The only cars I have yet to code are the new i4 and ix. No issues otherwise. Problem is that there is no other solution currently available beside chinese Esysplus, which I refuse to use.

LauncherPRO 3.7.0315 works for the G80. Just ask shawnsheridan.

[Almaretto]

Originally Posted by hockeygoalie35

LauncherPRO 3.7.0315 works for the G80. Just ask shawnsheridan.

It depends on what you intend to code because some mapping is incorrect or missing.

[dimab0]

I am trying to confirm that when I applied coding, the correct settings took. As I'm looking through, for example, the KAFAS module, both cafd files don't have any of the parameter names you hockeygoalie35 mention. Instead there is a ton of 'unknown' fields. Does this mean that I am missing mapping for G82?

I am using Esys 3.30.1 with Launcher Pro 2.8.1.155, connecting via Project: S18A_22_03_535_v_004_000_001, VehicleInfo: S18A. I have version v.4.34.30_PSdZData_Lite. Almaretto is this the latest version?

What am I missing?

[Almaretto]

Originally Posted by dimab0

I am trying to confirm that when I applied coding, the correct settings took. As I'm looking through, for example, the KAFAS module, both cafd files don't have any of the parameter names you hockeygoalie35 mention. Instead there is a ton of 'unknown' fields. Does this mean that I am missing mapping for G82?

I am using Esys 3.30.1 with Launcher Pro 2.8.1.155, connecting via Project: S18A_22_03_535_v_004_000_001, VehicleInfo: S18A. I have version v.4.34.30_PSdZData_Lite. Almaretto is this the latest version?

What am I missing?

That launcher will not have mapping

[dimab0]

Originally Posted by Almaretto

That launcher will not have mapping

I need a different Launcher Pro version? Can you share a link?

[Almaretto]

Originally Posted by dimab0

I need a different Launcher Pro version? Can you share a link?

Launcher Pro is no longer available, so I cannot share a link. Currently, only option is EsysPlus, if you do not mind Chinese version that requires you to disable antivirus.

[dimab0]

Originally Posted by Almaretto

Launcher Pro is no longer available, so I cannot share a link. Currently, only option is EsysPlus, if you do not mind Chinese version that requires you to disable antivirus.

Thank you. That's disappointing. I think I will be wary of the Chinese version at this time. I guess will miss out on anti dazzle then. Thank you for clearing things up.

[Nkr15]

Originally Posted by dimab0

Thank you. That's disappointing. I think I will be wary of the Chinese version at this time. I guess will miss out on anti dazzle then. Thank you for clearing things up.

There's no anti dazzle available without the Chinese version? I thought multiple people have done it now

[dimab0]

Originally Posted by Nkr15

There's no anti dazzle available without the Chinese version? I thought multiple people have done it now

I'm assuming at least most of them did use the Chinese version, or paid Almaretto to do it remotely using this Chinese version.

To be clear, I coded whatever the old version allowed without mappings. It seems to have achieved some version of anti dazzle but it does not seem super impressive to be worthwhile.

[Nkr15]

Originally Posted by dimab0

I'm assuming at least most of them did use the Chinese version, or paid Almaretto to do it remotely using this Chinese version.

To be clear, I coded whatever the old version allowed without mappings. It seems to have achieved some version of anti dazzle but it does not seem super impressive to be worthwhile.

I don't think Almaretto uses the Chinese version either. So is it just not there then or not bright enough? This is unfortunate. Basically it isn't worth the hassle?

[Almaretto]

Originally Posted by dimab0

I'm assuming at least most of them did use the Chinese version, or paid Almaretto to do it remotely using this Chinese version.

To be clear, I coded whatever the old version allowed without mappings. It seems to have achieved some version of anti dazzle but it does not seem super impressive to be worthwhile.

I do not trust Chinese software, especially with it getting flagged by browser and antivirus. So, I have never used.

I use TM Launcher Pro.

[dimab0]

Originally Posted by Almaretto

I do not trust Chinese software, especially with it getting flagged by browser and antivirus. So, I have never used.

I use TM Launcher Pro.

Without latest mappings? And you assume it is good enough at least for those settings you change?

[Barathon]

I was able to code anti dazzle without using the Chinese version. You can't do any FDL coding but you can use it for the VO coding.

Here's what I did.

https://g80.bimmerpost.com/forums/sh....php?t=1910002

[Almaretto]

Originally Posted by dimab0

Without latest mappings? And you assume it is good enough at least for those settings you change?

I got access to updated files, which I used to make additions to my Launcher Cheat Codes. I use werte values, so I can apply necessary changes even if Launcher does not have updated mapping incorporated.

[Almaretto]

Originally Posted by Barathon

I was able to code anti dazzle without using the Chinese version. You can't do any FDL coding but you can use it for the VO coding.

Here's what I did.

https://g80.bimmerpost.com/forums/sh....php?t=1910002

Definitely missing some steps which will impair correct performance. Plus, skip the VCM stage.

• You can see FA FP updated at 2:05.
• Though, I recommend you do not update so car FA matches factory when readout by dealership.
• You will also find additional BDC settings posted in various threads
• And require more FLM and KAFAS changes

[Barathon]

Originally Posted by Almaretto

Definitely missing some steps which will impair correct performance. Plus, skip the VCM stage.

• You can see FA FP updated at 2:05.
• Though, I recommend you do not update so car FA matches factory when readout by dealership.
• You will also find additional BDC settings posted in various threads
• And require more FLM and KAFAS changes

Could you please list the missing steps to get full functionality?