[MTM3]

Originally Posted by Der_Wolf

The setting is in iDrive. I can find out for you later, but I prefer the radio to stay on until I open the door. Its nice if you are going to park somewhere for a few mins and still want to listen to music without wasting fuel.

Let me know if you see it.
Yeah valid argument but if I have to I’d rather sit in the car with engine running and AC on especially where I live we have 90 plus degrees 5 months a year. Plus I’d rather waste fuel than battery. But I get the other side

[MTM3]

That’s what I meant when I asked if anyone tried changing default driving mode

[mzcp]

Originally Posted by MTM3

That’s what I meant when I asked if anyone tried changing default driving mode

I tried the Sport setting but that did not change anything. Could this be for G20 only?

[Almaretto]

Originally Posted by mzcp

I tried the Sport setting but that did not change anything. Could this be for G20 only?

I have tried all, except eco pro individual and eco pro+. It worked on all g-series BMWs.

[mzcp]

Originally Posted by Almaretto

I have tried all, except eco pro individual and eco pro+. It worked on all g-series BMWs.

Will the default mode start every time you start the car? By default the car starts in Comfort mode on my G80

[Almaretto]

Originally Posted by mzcp

Will the default mode start every time you start the car? By default the car starts in Comfort mode on my G80

Yes. Whichever option I code, car now starts. By default, all cars start in comfort unless coded otherwise.

[mzcp]

Can you code my car to start in Sport? I have tried with Bimmercode but it did not make any changes.

[MTM3]

Originally Posted by mzcp

Can you code my car to start in Sport? I have tried with Bimmercode but it did not make any changes.

Right. I need to go back and try. What threw me off was eco and other strange ones.
Had it been just comfort sport and sport+ I would have tried it already.

[bimmermann88]

Sorry if this has been mentioned before but does coding affect any warranty's at all and can you brick your ecu if something goes wrong?!

[nearwater4me]

Originally Posted by MTM3

Right. I need to go back and try. What threw me off was eco and other strange ones.
Had it been just comfort sport and sport+ I would have tried it already.

I thought the same.
Saw the menu and was intrigued to try it out, but ended up not coding that one until there's a definitive answer.

[nearwater4me]

Originally Posted by bimmermann88

Sorry if this has been mentioned before but does coding affect any warranty's at all and can you brick your ecu if something goes wrong?!

There's been tons of debate on this subject and the general consensus is that most dealers do not care or notice any coded functions.
I can only say from my personal experience, but I didn't have any issues with dealers when I had my F87.

If the coding process is interrupted for whatever reason, it can brick that ECU.
That being said, the chance of this happening is pretty slim.
Just make sure you have the phone in airplane mode (if using BC), fully charged battery w/ tender hooked up to the car.

[MTM3]

Originally Posted by nearwater4me

I thought the same.
Saw the menu and was intrigued to try it out, but ended up not coding that one until there's a definitive answer.

Yep. Adaptive doesn’t make sense, neither does comfort +.
It must be generic for all kinds of BMWs

[mzcp]

Originally Posted by MTM3

Yep. Adaptive doesn’t make sense, neither does comfort +.
It must be generic for all kinds of BMWs

Trying to code this with E-Sys

[MTM3]

Originally Posted by mzcp

Trying to code this with E-Sys

Great, let me know how far you get.
Ideally you want to start in M1 (whatever it is configured as) and M Mode dashboard layout.

[mzcp]

Originally Posted by MTM3

Great, let me know how far you get.
Ideally you want to start in M1 (whatever it is configured as) and M Mode dashboard layout.

Yep I will let you know
Bad news, I was told to wait for the newer version of Psdzdata

[gnolivos]

Question for those of you utilizing the TestFlight version of BimmerCode. When you install the TestFlight version of the app, will it replace the standard app?

Also, will my original backup coding files be erased when I install the TestFlight version? It seems like it is giving me a warning about that and I am afraid to proceed and lose my backups. Thanks!

[Alvinggg]

Originally Posted by moproblems

Hi all, sorry for the late reply but a PM reminded me I should really post this.

CODE AT YOUR OWN RISK, I AM NOT RESPONSIBLE FOR A DEALERSHIP VISIT DUE TO A DIAG DROPOUT OR BMW LOCKING YOU OUT OF THESE FEATURES IN THE FUTURE.

G8x CODING FOR ANTI DAZZLE HEADLIGHTS AS OF 03/21 SOFTWARE UPDATE

Under the BDC module in expert there are 4 groups called LaMaster 1 through 4. They will be identified by LA1, LA2, and LA3. New values are after the space on each line. Print it out, these take some searching and you will drop out of diagnostic mode sometimes switching in and out of the app.

LA1

C_BLC_PRE_ENA | 1
LUT_FLC_FORWARDLIGHTING_Y | AFS


LA2

C_AFS_ECO_LEVEL_3_ENA | 01
C_AFS_ENA | 01


LA3

LUT_AFS_CODRV_HOR | standard/init
LUT_AFS_DRV_HOR | F040_G005_AHL...
C_CLC_CURV_V2 | 23
C_CLC_CURV_V3 | 28
C_CLC_EXT_ENA | 01
C_HBA_DIM_ENA | 01
C_HBA_GFHBA_ENA_V_HI | 3C
C_HBA_GFHB_ENA | 01

There are 4 more codings in the lane assist camera "KAFAS04" which we cannot currently access with bimmercode. Supposedly these will make the auto dim less aggressive while also making the beams tighter. The HBA will still perform extremely well without these changes. These can be changed with Esys.
I HAVE NOT TESTED THIS AT ALL ON G8X. IF YOU HAVE ESYS, PROCEED WITH CAUTION.

C_FLA_COUNTRY_WITH_MULTIPLE_REFLECTORS | 01
C_FLA_US_SENSITIVITY_MODE | 00
C_FLA_BS_ENTER_THRESH | 03
C_FLA_BS_EXIT_THRESH | 02

Thank you to "juhcobywankenobi" on the G20 forum for posting a screenshot of the cheat codes for this.

I have a 2022 G82 in Australia with ECE spec I believe, check my coding which are all the same as you provided above… but mine anti-dazzle is just not working as expected. Well not fully functional as it’ll turn high beam fully off if there’s a car ahead doesn’t matter where the car is. Any idea?
Btw we have laser light as standard options for G80 and G82

[Alvinggg]

In Australia if we want the cluster in M mode, it’ll turn off safety features as we won’t be able to use the acc function. For us, acc and m cluster can’t exist at the same time. Any idea?
Also, is there any way we can start the cluster in M mode as default?

[forza1976]

Originally Posted by Alvinggg

In Australia if we want the cluster in M mode, it’ll turn off safety features as we won’t be able to use the acc function. For us, acc and m cluster can’t exist at the same time. Any idea?
Also, is there any way we can start the cluster in M mode as default?

Can’t use both at the same time here in the states too. Not logical to have both anyway. Where would the graphics for ACC be presented in m mode?

[MTM3]

Originally Posted by Der_Wolf

The setting is in iDrive. I can find out for you later, but I prefer the radio to stay on until I open the door. Its nice if you are going to park somewhere for a few mins and still want to listen to music without wasting fuel.

Please let me know if you find it in iDrive or Bimmercode. I've gone through both and can't seem to locate it.
Having the radio on after shutting off the engine is irritating me to no end. I want shit off, all of it Almost as bad as having an electronic e-brake instead of a normal lever with MT

[Der_Wolf]

Originally Posted by MTM3

Please let me know if you find it in iDrive or Bimmercode. I've gone through both and can't seem to locate it.
Having the radio on after shutting off the engine is irritating me to no end. I want shit off, all of it Almost as bad as having an electronic e-brake instead of a normal lever with MT

I'm sorry I forgot to do it this weekend for you. When I get home tonight I will absolutely find it for you!

[BIGW0RM]

Has anyone enabled Tesla mode for drivers assistance yet?