[simsimma120]

Moving from JB4 to Femto unlock and tune through BM3, debating which tuner to use currently. Current mods on the car listed below. My goal is 9 second 1/4 and as low in to the 5’s 60-130 as i can get before I consider port injection and trye flex fuel. Most likely an E50 tune, i test my local pump E and its typically 80-90% which is great.

R44 catless dp
Valvetronic mid
XHP
JB4
Fuel It bluetooth content analyzer
May do intakes at some point but it’s not really necessary

Considering tunes from
Cedar Performance
F80/G80 Paul
utku

Anyone else I should be checking out?

[MTWO]

You also have ab performance, jordan tuned, sameh, not sure if hcp is available but usually too busy with bm3 stuff.

[edgar00]

Hello , does the BM3 flex fuel tune can handle OPF removal when using a mid pipe ? (EU version) or do i need an OPF delete device or some other solution ?
Also is there any instruction available on how to and where to wire the canbus wire from the ethanol sensor ?

[Sbm007]

Originally Posted by edgar00

Hello , does the BM3 flex fuel tune can handle OPF removal when using a mid pipe ? (EU version) or do i need an OPF delete device or some other solution ?
Also is there any instruction available on how to and where to wire the canbus wire from the ethanol sensor ?

Yes BM3 lets you configure any map to disable OPF sensors

[curtdragon]

Originally Posted by FSociety

The Visconti kit he sells is zeitronix, all he is including is additional hardware to make it easier than someone going straight on the zeitronix site if they don’t click on the canbus one.
So it is compatible because it’s not really his kit

Lol I mean can you buy the stuff he sells separate? Yes.
If he's putting separate parts together in a package it's a kit. That's literally the definition.

BMW doesn't make radiators and ZF makes the transmission. Does it now make it not a BMW.

Kit: a set of articles or equipment needed for a specific purpose.

PS I'm not a visconti fanboi or anything just dislike when people take away from what someone else has done.

You click on the Zeitronix site choose the correct package you still will need the fuel lines, fittings and harness.

[MTWO]

Originally Posted by curtdragon

Lol I mean can you buy the stuff he sells separate? Yes.
If he's putting separate parts together in a package it's a kit. That's literally the definition.

BMW doesn't make radiators and ZF makes the transmission. Does it now make it not a BMW.

Kit: a set of articles or equipment needed for a specific purpose.

PS I'm not a visconti fanboi or anything just dislike when people take away from what someone else has done.

You click on the Zeitronix site choose the correct package you still will need the fuel lines, fittings and harness.

Sure, its a kit, basic yet overpriced for what it is. I’m assuming that’s what the OP wanted to convey

[curtdragon]

Originally Posted by MTWO

Sure, its a kit, basic yet overpriced for what it is. I’m assuming that’s what the OP wanted to convey

I mean is it? Are most people going to go shop around for fittings and extended harnesses and hoses that are cut to the appropriate size for this application?
If not then it's priced right lol

[MTWO]

Its all oem and a few lines he sells. I was simply replying to previous OP comment, just an opinion based on what’s presented. If you like what you see go for it bruh all hat matters

[Jeg_e90m3]

How much are people paying for tunes apart from the unlock?

[mikewho_G82]

Originally Posted by simsimma120

Moving from JB4 to Femto unlock and tune through BM3, debating which tuner to use currently. Current mods on the car listed below. My goal is 9 second 1/4 and as low in to the 5’s 60-130 as i can get before I consider port injection and trye flex fuel. Most likely an E50 tune, i test my local pump E and its typically 80-90% which is great.

R44 catless dp
Valvetronic mid
XHP
JB4
Fuel It bluetooth content analyzer
May do intakes at some point but it’s not really necessary

Considering tunes from
Cedar Performance
F80/G80 Paul
utku

Anyone else I should be checking out?

check out Bend Calibrations if you are looking for a custom tune. most professional and skilled engineers i have worked with.

[2Times]

I see that BM3 fixed the remote start issue... does this mean that I don't have to pay FEMTO for this coding?

[yvorobyov]

Originally Posted by 2Times

I see that BM3 fixed the remote start issue... does this mean that I don't have to pay FEMTO for this coding?

Starting from 01.01.2023 - Femto is not charging for remote engine start fix. Hope it will be helpful for all.

[2Times]

Originally Posted by 2Times

I see that BM3 fixed the remote start issue... does this mean that I don't have to pay FEMTO for this coding?

Originally Posted by yvorobyov

Starting from 01.01.2023 - Femto is not charging for remote engine start fix. Hope it will be helpful for all.

Can verify this is true… wasn’t charged for remote start 😊

[DravitG80]

Hi noobie here,

JW how long the whole process for dme unlock usually takes

Thanks

[Jon H]

Check this thread. Quite a few people reporting their timelines. FEMTO usually sends it back out very quick once received and payment processed.

https://g80.bimmerpost.com/forums/sh....php?t=1987762

[mike@x-ph.com]

Originally Posted by DravitG80

Hi noobie here,

JW how long the whole process for dme unlock usually takes

Thanks

From what i heard, the turnaround time is relatively fast. Generally, it only takes a few days for Femto to process and have the item shipped back to you.

[Froz3n_M]

I’ve had the customROM OTS 93 stage 2 maps for some time. I cannot, for the life of me, get the valves to fully open when selected. Does this happen to anyone else?

Also, anyone running a canbus for flex fuel on the multimap? If so, is it working well?

I’ve contacted bootmod3 support and getting nowhere with the valves, and I sold my Dahler unit…

[2Times]

Originally Posted by Froz3n_M

I’ve had the customROM OTS 93 stage 2 maps for some time. I cannot, for the life of me, get the valves to fully open when selected. Does this happen to anyone else?

Also, anyone running a canbus for flex fuel on the multimap? If so, is it working well?

I’ve contacted bootmod3 support and getting nowhere with the valves, and I sold my Dahler unit…

I didn't know that was an option... I thought it was just "open valves in sport"

[Froz3n_M]

Originally Posted by 2Times

I didn't know that was an option... I thought it was just "open valves in sport"

This is what I meant, when sport selected fully open valves. Does not work whether in sport or sport plus, valves remain in stock open positions which is roughly 1/4 while idle. I know they open more depending on RPM, but I just want them fully open as the software is saying or having my Dahler unit.

[chris3g]

Originally Posted by Froz3n_M

I’ve had the customROM OTS 93 stage 2 maps for some time. I cannot, for the life of me, get the valves to fully open when selected. Does this happen to anyone else?

Also, anyone running a canbus for flex fuel on the multimap? If so, is it working well?

I’ve contacted bootmod3 support and getting nowhere with the valves, and I sold my Dahler unit…

what does support say ? personally i find it hard to tell what the valves are doing by trying to listen to it, is there a logging param that shows the valve state?

i'm waiting for the BM3 kit for canbus flex fuel, it's supposed to be out next week.

[Froz3n_M]

Originally Posted by chris3g

what does support say ? personally i find it hard to tell what the valves are doing by trying to listen to it, is there a logging param that shows the valve state?

i'm waiting for the BM3 kit for canbus flex fuel, it's supposed to be out next week.

I have the AWE exhaust, I can literally see the whole valve on the inner exhaust tube, both sides.

Support says they’ll fix it in revision, that was 2 weeks ago and no ETA.

[2Times]

Originally Posted by Froz3n_M

This is what I meant, when sport selected fully open valves. Does not work whether in sport or sport plus, valves remain in stock open positions which is roughly 1/4 while idle. I know they open more depending on RPM, but I just want them fully open as the software is saying or having my Dahler unit.

Weird, works for me, I just enabled it in the maps