[RM73]

Originally Posted by jnslance

Just to clarify, is it okay to run G82 H & R springs for the G80 to get the better drop?

Am I understanding that because the front ends are the same you can run the G82 springs without an issue on the G80?

And if so what about the rear. Could you run the rear swapped out as well to get the 1.2 inch drop without an issue?

Thanks

I'm pretty sure the part #s are the same for both. What you need to look out for is XDrive vs RWD, those have different part #s.

[Czech M4]

Hello mate.


Can i ask about car behaviour in high speed on these springs and spacers?

I am driving fast on bumpy roads and I am interested in your experiences with this.

I want this look, but I donÂ’t want loose good handling in fast corners on bumpy roads.

Thanks a lot.

Originally Posted by ztxny

Just installed the H&R springs for the g82 m4. (part number 28616-2)
Got them from tirerack for about $380.
These are the correct springs for the car, I've noticed people in nyc installing springs but they're intended for a different model I believe.
Drop is 1.2" front & rear.
Spacers are also installed. 13mm front, 15mm rear

Will take and upload more pics tomorrow!

[M4Tejas]

Anything more than 20mm drop is a problem here with roads. NO way man. Not subscribing to the hype.

[Czech M4]

Originally Posted by M4Tejas

Anything more than 20mm drop is a problem here with roads. NO way man. Not subscribing to the hype.

What springs u recommend?

[mike@x-ph.com]

Originally Posted by Czech M4

What springs u recommend?

H&R VTF for me.

[M4Tejas]

Originally Posted by Czech M4

What springs u recommend?

Depends on your roads. Track car?

20mm is pushing it here with roads. A truck is paramount as a daily driver here. Construction is crazy. M3 apparently from web reports, you need the fronts only.

M4 - Eibach ProKit 20/20MM -- E10200490122

$316 shipped with VAT from the EU. No idea why you would want HAS at 1k or more when most will never adjust them for street driving.