[hockeygoalie35]

Hey all, I wanted to start an E-sys thread to keep track of what we find, and to keep it separate from Bimmercode, as that doesn't have all the functions (yet). Remember, code at your own risk!

First coding I've done is change the color of car in the settings menu from grey to Sunset Orange, as that's the closest to my color. All the individual color cars are set to silver, as the color is not entered into the system. I used the following guide:
https://g30.bimmerpost.com/forums/sh...78&postcount=1

Anti-Dazzle Enable (Can confirm that it works):
Bimmercode: In the BCU ECU, in expert mode:

LaMaster1
C_BLC_PRE_ENA: 1
LUT_FLC_FORWARDLIGHTING_Y: AFS

LaMaster2
C_AFS_ECO_LEVEL_3_ENA: 01
C_AFS_ENA: 01

LaMaster3
LUT_AFS_CODRV_HOR: standard/init
LUT_AFS_DRV_HOR: F040_G005_AHL...
C_CLC_CURV_V2: 23
C_CLC_CURV_V3: 28
C_CLC_EXT_ENA: 01
C_HBA_DIM_ENA: 01
C_HBA_GFHBA_ENA_V_HI: 3C
C_HBA_GFHB_ENA: 01

Then in E-SYS:
Read out the KAFAS modules and change:

C_FLA_COUNTRY_WITH_MULTIPLE_REFLECTORS: 01
C_FLA_US_SENSITIVITY_MODE: 00
C_FLA_BS_ENTER_THRESH: Rest of world
C_FLA_BS_EXIT_THRESH: Rest of world
COUNTRY_VARIATION: Europe_RC
C_FLA_CC_MESSAGE_3: no_CC_message
C_FLA_US_SENSITIVITY_MODE: Normal [00]

sources:
juhcobywankenobi
moproblems
chrisnack



If you guys find any other things can be changed, please add it below!


Resources:
Link to the Bimmercode thread

Making a backup of your coding (before going to the dealer, or before making a change!)

[mzcp]

If you can figure out on how to code Sport M Mode at startup that would be cool.

[Nkr15]

Do we still need windows for ESYS?

[hockeygoalie35]

Originally Posted by mzcp

If you can figure out on how to code Sport M Mode at startup that would be cool.

That would be! I'll do some digging. I already checked "LASTUSERMODE", but only get the options "Comfort" and "ECO-Pro". We don't even have an eco mode, do we?

Originally Posted by Nkr15

Do we still need windows for ESYS?

Looks like it, yeah.

[mzcp]

Originally Posted by hockeygoalie35

That would be! I'll do some digging. I already checked "LASTUSERMODE", but only get the options "Comfort" and "ECO-Pro". We don't even have an eco mode, do we?



Looks like it, yeah.

Only for G2X

[Alvinggg]

Originally Posted by hockeygoalie35

Then in E-SYS:
Read out the KAFAS modules and change:

C_FLA_COUNTRY_WITH_MULTIPLE_REFLECTORS: 01
C_FLA_US_SENSITIVITY_MODE: 00
C_FLA_BS_ENTER_THRESH: Rest of world
C_FLA_BS_EXIT_THRESH: Rest of world
COUNTRY_VARIATION: Europe_RC
C_FLA_CC_MESSAGE_3: no_CC_message
C_FLA_US_SENSITIVITY_MODE: Normal [00]

sources:
juhcobywankenobi
moproblems
chrisnack

For all the other LaMaster modules, i can find everything, but in this KAFAS part, i just can't find any one of this codes, any idea?
i'll get a screenshoot tomorrow as i did this before but i just can't find all these codes

[hockeygoalie35]

Originally Posted by Alvinggg

For all the other LaMaster modules, i can find everything, but in this KAFAS part, i just can't find any one of this codes, any idea?
i'll get a screenshoot tomorrow as i did this before but i just can't find all these codes

You're doing this part in E-Sys right? KAFAS has multiple FDLs, keep looking through them and use the search function. they're all in the same FDL, so once you find one, you'll find them all.

[Alvinggg]

Originally Posted by hockeygoalie35

You're doing this part in E-Sys right? KAFAS has multiple FDLs, keep looking through them and use the search function. they're all in the same FDL, so once you find one, you'll find them all.

I think they should be in CAFD 40F9, but all I found are numbers…..
I even tried 40F8, same results

[hockeygoalie35]

Originally Posted by Alvinggg

I think they should be in CAFD 40F9, but all I found are numbers…..
I even tried 40F8, same results

I'll take a look tomorrow night and I'll get you the correct one.

[Nkr15]

For the anti dazzle does this include the VLD and NGHB?

[djpapeleta]

Anyone tried Esys with a G83. I cant seem to get it to connect and emailed codemybimmer for remote coding but was told they might not be able to code remotely due to some new security measure BMW implemented to prevent coding.

Oddly enough I was able to use Bimmercode to code some other stuff but need ESys for coding Anti-Dazzle.

[jimbethesda]

Originally Posted by djpapeleta

Anyone tried Esys with a G83. I cant seem to get it to connect and emailed codemybimmer for remote coding but was told they might not be able to code remotely due to some new security measure BMW implemented to prevent coding.

Oddly enough I was able to use Bimmercode to code some other stuff but need ESys for coding Anti-Dazzle.

I paid a forum member to code anti dazzle remotely on my G83 after my car was updated to the latest version. So, yes, it's still possible.

[djpapeleta]

Originally Posted by jimbethesda

I paid a forum member to code anti dazzle remotely on my G83 after my car was updated to the latest version. So, yes, it's still possible.

Cool good to know. I will try again later but on a dedicated computer with Windows. Was trying to connect with VMware from my Mac but the bridge connection doesn't seem to be working.

[BIGW0RM]

Originally Posted by jimbethesda

I paid a forum member to code anti dazzle remotely on my G83 after my car was updated to the latest version. So, yes, it's still possible.

What is the latest version software? What does your show?

[jimbethesda]

Originally Posted by BIGW0RM

What is the latest version software? What does your show?

I have the 11/2021 version. It was installed by the dealership when my car was in for the 1,200 service

[djpapeleta]

Which chassis did you guy select when coding. For targetSelector there is no G series.

[Barathon]

Almaretto Have you coded any Gx recently and can you confirm or deny if there are new security features blocking coding?

What launcher are you using and would you be able to share it? PM me if you can please, I'd be interested in getting it as long as it works with G series, specifically for the G80 and G26. Thanks

[hockeygoalie35]

Originally Posted by djpapeleta

Which chassis did you guy select when coding. For targetSelector there is no G series.

Make sure you have PSDZdata v.4.33.31 or greater.


Here's how I connect, use the second S18 Chassis.

View post on imgur.com

[dimab0]

Originally Posted by hockeygoalie35

Hey all, I wanted to start an E-sys thread to keep track of what we find, and to keep it separate from Bimmercode, as that doesn't have all the functions (yet). Remember, code at your own risk!

First coding I've done is change the color of car in the settings menu from grey to Sunset Orange, as that's the closest to my color. All the individual color cars are set to silver, as the color is not entered into the system. I used the following guide:
https://g30.bimmerpost.com/forums/sh...78&postcount=1

Anti-Dazzle Enable (Can confirm that it works):
Bimmercode: In the BCU ECU, in expert mode:

LaMaster1
C_BLC_PRE_ENA: 1
LUT_FLC_FORWARDLIGHTING_Y: AFS

LaMaster2
C_AFS_ECO_LEVEL_3_ENA: 01
C_AFS_ENA: 01

LaMaster3
LUT_AFS_CODRV_HOR: standard/init
LUT_AFS_DRV_HOR: F040_G005_AHL...
C_CLC_CURV_V2: 23
C_CLC_CURV_V3: 28
C_CLC_EXT_ENA: 01
C_HBA_DIM_ENA: 01
C_HBA_GFHBA_ENA_V_HI: 3C
C_HBA_GFHB_ENA: 01

Then in E-SYS:
Read out the KAFAS modules and change:

C_FLA_COUNTRY_WITH_MULTIPLE_REFLECTORS: 01
C_FLA_US_SENSITIVITY_MODE: 00
C_FLA_BS_ENTER_THRESH: Rest of world
C_FLA_BS_EXIT_THRESH: Rest of world
COUNTRY_VARIATION: Europe_RC
C_FLA_CC_MESSAGE_3: no_CC_message
C_FLA_US_SENSITIVITY_MODE: Normal [00]

sources:
juhcobywankenobi
moproblems
chrisnack



If you guys find any other things can be changed, please add it below!


Resources:
Link to the Bimmercode thread

Making a backup of your coding (before going to the dealer, or before making a change!)

Confirming, is Bimmercode required for the anti-dazzle? So need to make changes via bimmercode (paid app), and also via esys?

[djpapeleta]

Originally Posted by dimab0

Confirming, is Bimmercode required for the anti-dazzle? So need to make changes via bimmercode (paid app), and also via esys?

You can do all the coding with just ESYS. Quoting Moproblems from the bimmercode thread. "There are 4 more codings in the lane assist camera "KAFAS04" which we cannot currently access with bimmercode. Supposedly these will make the auto dim less aggressive while also making the beams tighter. The HBA will still perform extremely well without these changes. These can be changed with Esys."

So as you can see you can code with just bimmercode and it will work great but ESYS will code the rest of the features in.

[dimab0]

Originally Posted by djpapeleta

You can do all the coding with just ESYS. Quoting Moproblems from the bimmercode thread. "There are 4 more codings in the lane assist camera "KAFAS04" which we cannot currently access with bimmercode. Supposedly these will make the auto dim less aggressive while also making the beams tighter. The HBA will still perform extremely well without these changes. These can be changed with Esys."

So as you can see you can code with just bimmercode and it will work great but ESYS will code the rest of the features in.

Everything seems fine except when I "Read ecu" I only have 7 items show up. Missing the kafas section etc….I connected using S18A. Maybe that's the problem….

[dimab0]

Originally Posted by dimab0

Everything seems fine except when I "Read ecu" I only have 7 items show up. Missing the kafas section etc….I connected using S18A. Maybe that's the problem….

Nvm car engine has to be on. Cool