[Derek.Hohn]

Does anyone have information on when these will be available to the public ? I have searched here and google and can not find an update sine January of 2021. In the January 2021 update Bootmood3 details planned enhancements for the second revision but I can not find information that talks about expected product release time frame.

I have everything collected for my next round of mods except for the new intake/cooler, port injection, upgraded lpfp ect that would be needed for suplemental fueling. I am extremely hesitant to spend the money for port injection without true canbus integration that will allow for two way communication that can provide additional safety measures.

Any help or information would be greatly appreciated!

[Derek.Hohn]

Information from the last update found on protuningfreaks



BOOTMOD3 ELECTRONICS: REV2 CANBUS INTEGRATION BOARD
bootmod3 electronics: Rev2 CANBus Integration Board
Exciting news from the bm3 electronics team! With the Rev1 version of our CANBus sensor hub board completed, and now focusing on an enclosure design, we have finalized our Rev2 design as well. As mentioned in our previous post, Rev2 board builds further on the Rev1 design by expanding its input sensing abilities and adds 6 outputs.
The smaller Rev1 board features configurable CANBus conversion for 2 frequency inputs (e.g. flex sensor input), and 3 analog 0-5v inputs and will be a lower cost option for those looking to simply hook up a flex fuel sensor and possibly monitor any other sensors needed (e.g. low pressure side fuel pressure sensor on N55/B58) and be able to get Flex Fuel running using BM3 custom software enhancements right inside the DME. For flex fuel sensor integration, Zeitronix ECA2 and any other similar boards are also supported.
The Rev2 board keeps the 2 frequency inputs like the Rev1, adds 2 EGT sensor inputs, expands from 3 to 8 analog 0-5v analog inputs and adds 6 outputs. All i/o is canbus integrated for sensing and control of canbus connected systems, primarily the DME. Both boards have integrated WiFi/BLE and all configuration is done over WiFi and integrated with the bm3 app/editor for ease of use by end users and tuners. Stay tuned for the release of many of the other new features we’ve been working on over the past year and more to follow on this board as firmware development is completed.

[TselaG80]

So funny you made this post cause i was just about to email them regarding the status of Rev2.

my ECU is already unlocked and Bm3 uploaded, i really hope ECU doesnt have to go back to FEMTO for Rev2....

[blackdm]

Originally Posted by TselaG80

So funny you made this post cause i was just about to email them regarding the status of Rev2.

my ECU is already unlocked and Bm3 uploaded, i really hope ECU doesnt have to go back to FEMTO for Rev2....

Unfortunately, it must be sent to femoto

[forcefed]

Originally Posted by Derek.Hohn

Does anyone have information on when these will be available to the public ?

😅

[Dawgz]

Originally Posted by blackdm

Unfortunately, it must be sent to femoto

Why? If you have custom rom why would it need to be resent

[TselaG80]

Originally Posted by Dawgz

Why? If you have custom rom why would it need to be resent

spoke with BM3 directly, they said has to go to Femto so they and upload the Rev2 program.

Such a Buzz kill especially since i just did the unlock and bm3 tune.

i wonder how much it will cost additionally

[Dawgz]

Originally Posted by TselaG80

spoke with BM3 directly, they said has to go to Femto so they and upload the Rev2 program.

Such a Buzz kill especially since i just did the unlock and bm3 tune.

i wonder how much it will cost additionally

ya that sucks! especially since my DME is currently on its way to get the unlock, looks like ill have to send it out again at some point

[g80_zayd]

Originally Posted by blackdm

Unfortunately, it must be sent to femoto

Said who? Do you have email proof?

[g80_zayd]

Originally Posted by TselaG80

spoke with BM3 directly, they said has to go to Femto so they and upload the Rev2 program.

Such a Buzz kill especially since i just did the unlock and bm3 tune.

i wonder how much it will cost additionally

Who did you speak with? I was told otherwise. See my reply above.

[TselaG80]

Originally Posted by g80_zayd

Who did you speak with? I was told otherwise. See my reply above.

I spoke to someone on DM from their IG page, but they must be miss informed.

great news if we dont have to send out ECU back.

I wonder if rev2 will give any added power for OTS 93 maps.

[viciousmo]

Originally Posted by TselaG80

I spoke to someone on DM from their IG page, but they must be miss informed.

great news if we dont have to send out ECU back.

I wonder if rev2 will give any added power for OTS 93 maps.

OTS 93 is likely not getting touched given the scope of Rev2. Throw in a splash of 93 in your tank to clean up timing corrections or get it custom tuned.

[2Times]

Following, interested in this as well

[TopJimmy]

proTUNING Freaks
3 years later…

[Dawgz]

This is what they said to me

[TselaG80]

WTF can we just get a final answer if it needs to be sent back or not lmao

[vasillalov]

Wow! Haha. Send the PTF guys a link to this thread so they can get themselves organized. This is hilarious at this point.

[Impulse20098]

Whenever it gets released I'll happily send my DME back to femto. Or if it can be done stateside then that is fine as well. Just release rev 2 lol

[FSociety]

Originally Posted by Impulse20098

Whenever it gets released I'll happily send my DME back to femto. Or if it can be done stateside then that is fine as well. Just release rev 2 lol

You will need to unlock your ECU again for Rev2 CustomRom unless, you have a spare pre 06/2020 ecu already.

[Impulse20098]

Originally Posted by FSociety

You will need to unlock your ECU again for Rev2 CustomRom unless, you have a spare pre 06/2020 ecu already.

Yeah that's what I said. I'll send it back lol.

[SwankPeRFection]

It’s been my experience that Zanin is fucking clueless as to what’s up. He always has to go up the chain to ask someone else in support for an answer and even then can’t get a complete answer to save his life. Serge seems to be the one that provides the most correct info. This is just based on some interactions I’ve had with them. Sad that they can’t get everyone on the same page of info if they’re going to have Zanin field these email communications with them.