Front Lip Thread.

jpsimon · 11-16-2022, 01:36 PM

Quote:

Originally Posted by Simon H

Really like this, did you fit this yourself, and are there any fitment issues ?, TIA

I did install it myself. Final fitment is spot on. Pretty much perfect. The only issue I ran into during install were 2 holes that were maybe 1/4” off. I just needed to take a drill and slightly expand those 2 holes in one direction so I could get the push-pin things back in for those 2 spots. Just took an extra minute or two.

Everything else lines up perfectly and it slips right into place.

jpsimon · 11-16-2022, 01:37 PM

Quote:

Originally Posted by Sp2pilot

Does this lip just cover up the stock black corner pieces or do they have to be removed? I really like the way this looks.

You have to remove the black corner pieces to install this

Spoolin Montego · 11-16-2022, 02:13 PM

RW 3d style lip on my G80

ryanb06 · 11-16-2022, 02:38 PM

Quote:

Originally Posted by Spoolin Montego

RW 3d style lip on my G80

Looks good. Any more pics?

Spoolin Montego · 11-16-2022, 02:51 PM

Quote:

Originally Posted by ryanb06

Looks good. Any more pics?

soon need to take more, just put it on

forumlurker · 11-16-2022, 11:14 PM

anyone have pictures of the csl front lip? curious to know how far the side wings stick out and if you had issue with driveways or parking next to curbs

luckym3girlnj · 11-17-2022, 07:56 AM

The ones that we sell made by unit 17, are complete replacements i’ve got a bunch of videos I can’t upload to this thread from my phone, if you want send me a message on Instagram and I can send you some so that you can get an idea of what it looks like

Luckym3girlnj

Quote:

Originally Posted by Sp2pilot

Does this lip just cover up the stock black corner pieces or do they have to be removed? I really like the way this looks.

LBBDrew · 11-18-2022, 12:24 AM

Quote:

Originally Posted by RedM4Erik

@ Chujk1985 : That is the Maxton front durability splitter

@ Anderson : I didn't want to mess it up so I brought it to a local body shop place for install. They had to remove the entire front bumper to align it properly , drill the holes and install the 10 screws that holds it. No way that things could be just teared off for sure.

Looks great. are you happy with the quality? It's so reasonably priced, I'm thinking of picking one up too. Maybe side skirts & diffuser too.

R44 Performance · 11-18-2022, 05:55 AM

If you haven't seen our SEMA 2022 post we build a car over in the states with our SP1 front splitter and a load of other carbon goodies, here is one of my favourite shots! Name: SEMA4-49.jpg
Views: 1643
Size: 382.6 KB

Name: SEMA4-49.jpg
Views: 1643
Size: 382.6 KB

KANdaddy · 11-18-2022, 04:45 PM

Quote:

Originally Posted by R44Zach

If you haven't seen our SEMA 2022 post we build a car over in the states with our SP1 front splitter and a load of other carbon goodies, here is one of my favourite shots!Attachment 3035847

I wanted to buy your lip but never heard back from you. Had to move on…

abdulisraddd · 11-19-2022, 12:31 PM

Not the best pics but here's CSL Style lip I'll take better ones later.

forumlurker · 11-19-2022, 03:58 PM

Quote:

Originally Posted by abdulisraddd

Not the best pics but here's CSL Style lip I'll take better ones later.

which brand is the lip?

do the side pieces cause issue with driveways?

Laguna01///M3 · 12-01-2022, 11:46 AM

Turner Motorsports new Front Lip

https://www.turnermotorsport.com/p-3...nt-lip-g80-m3/

forumlurker · 12-01-2022, 02:46 PM

Quote:

Originally Posted by Laguna01///M3

Turner Motorsports new Front Lip

https://www.turnermotorsport.com/p-3...nt-lip-g80-m3/

nicely priced and looks good too. I wonder if its dry carbon?

TurboSid · 12-04-2022, 06:28 PM

Suvneer front lip. Fit great and all oem hardware was reused. Needed to drill out the holes where the rivets go a bit to get them to fit.

Noah carbon · 12-05-2022, 01:28 AM

Quote:

Originally Posted by LBBDrew

Looks great. are you happy with the quality? It's so reasonably priced, I'm thinking of picking one up too. Maybe side skirts & diffuser too.

JTO24 · 12-05-2022, 02:09 PM

Quote:

Originally Posted by Laguna01///M3

Turner Motorsports new Front Lip

I like this! Nice and simple

JTO24 · 12-06-2022, 08:06 AM

Looks great!

Snt282 · 12-09-2022, 08:55 PM

Quote:

Originally Posted by Mashour

Same boat here but still too pricey for just a replica. I'll wait until I see oem rep for under 300

Any luck yet? Did you end up going with anything?

Mashour · 12-10-2022, 05:46 PM

Quote:

Originally Posted by Snt282

Quote:

Originally Posted by Mashour

Same boat here but still too pricey for just a replica. I'll wait until I see oem rep for under 300

Any luck yet? Did you end up going with anything?

Not yet. Gonna snow here pretty soon so I'll wait till spring haha

R44 Performance · 12-14-2022, 09:39 AM

Quote:

Originally Posted by DS_BMW

Out of all these what lip's bolt on using stock hardware besides R44? No drilling required.

Hey! The SP1 uses factory mounting points as well as adheasive tape to give a secure and clean fitment.

Let me know if there is anything I can help with at all.

BTC Maxi · 12-19-2022, 09:44 PM

Quote:

Originally Posted by Laguna01///M3

Turner Motorsports new Front Lip

https://www.turnermotorsport.com/p-3985702-turner-motorsport-carbon-fiber-front-lip-g80-m3/

Has anyone bought/installed this front lip? Interested in getting it but want to see some real life pictures before purchasing

11-16-2022, 02:13 PM	#465
Spoolin Montego Captain 602 Rep 871 Posts Drives: 16 m3/20 x5m/23 m3 Join Date: Mar 2012 Location: Orange County iTrader: (1)	RW 3d style lip on my G80 Attached Images
	Appreciate 12 Laguna01///M31396.00 50shadesofhockenheim2157.50 JTO245274.50 JDUNITNOW3504.00 luckym3girlnj786.50 j1valverde80.00 M3ANSPEC393.00 Limegrntaln13451.00 02M3ForMe4261.50 yousefnjr6157.50 LuckyBrand1303.50 Praga0747.50 Quote

11-16-2022, 11:14 PM	#468
forumlurker Lieutenant 780 Rep 398 Posts Drives: almost every day Join Date: Sep 2022 Location: g80.g82 forums iTrader: (0)	anyone have pictures of the csl front lip? curious to know how far the side wings stick out and if you had issue with driveways or parking next to curbs
	Appreciate 0 Quote

11-18-2022, 05:55 AM	#471
R44 Performance BimmerPost Supporting Vendor 1791 Rep 384 Posts Drives: Part of the process%E2%80%A6 Join Date: Dec 2021 Location: London, United Kingdom iTrader: (0)	R44 mhc+ sp1 on the sema 2022 build If you haven't seen our SEMA 2022 post we build a car over in the states with our SP1 front splitter and a load of other carbon goodies, here is one of my favourite shots!
	Appreciate 6 JTO245274.50 OF Hero1133.00 Limegrntaln13451.00 02M3ForMe4261.50 M4Tejas785.00 Praga0747.50 Quote

11-19-2022, 12:31 PM	#473
abdulisraddd Second Lieutenant 272 Rep 251 Posts Drives: 2023 G82 X Dravit Join Date: Oct 2021 Location: Los Angeles CA iTrader: (1)	Not the best pics but here's CSL Style lip I'll take better ones later. Attached Images __________________ 2020 A90- 750whp SOLD 2022 IOMG G80- SOLD 2023 DRAVIT G82- 780AWHP 2025 IOMG G82- Ordered
	Appreciate 6 forumlurker779.50 FISH225402.50 02M3ForMe4261.50 yousefnjr6157.50 FrankieNuo1219.00 Praga0747.50 Quote

12-01-2022, 11:46 AM	#475
Laguna01///M3 IG @WBucco 1396 Rep 816 Posts Drives: '22 PB G80 6SPD Join Date: Apr 2006 Location: New Jersey iTrader: (0)	Turner Motorsports new Front Lip https://www.turnermotorsport.com/p-3...nt-lip-g80-m3/
	Appreciate 7 forumlurker779.50 forcefed2562.50 FISH225402.50 chujk1985542.50 JTO245274.50 Nado230.00 02M3ForMe4261.50 Quote

12-04-2022, 06:28 PM	#477
TurboSid Brigadier General 1111 Rep 3,262 Posts Drives: 2022 M4Cx BSM/FR Join Date: Apr 2008 Location: Florida iTrader: (4) Garage List 2008 335i [0.00]	Suvneer front lip. Fit great and all oem hardware was reused. Needed to drill out the holes where the rivets go a bit to get them to fit. Attached Images __________________ 2022 BSM/FR M4 Competition X-Drive 2017 MW/SO M4 ZCP [SOLD] • 2015 MW/SO M4 M-DCT FBO [SOLD] • 2011 AW/CR 335is DCT FBO [SOLD] • 2008 AW/CR 335i 6MT FBO [SOLD]
	Appreciate 2 Laguna01///M31396.00 FISH225402.50 Quote

12-06-2022, 08:06 AM	#480
FeralIndustries Guest 0 Rep n/a Posts Drives:	Looks great!
	Appreciate 1 JTO245274.50 Quote