[apeas2]

Has anyone received these pads recently to confirm the front pads do NOT stick out in front of the caliper? The part number without the hardware is 1553-1850-00. The pics I have seen on older threads shows the front pads sticking out about 2mm which is not correct. I dont want to have to go through the hassle of returning them if thats the case. Thanks!

[forcefed]

Probably wrong pads in that thread, i remember someone ordered pads for ccb's and put them on their iron rotors.
Btw that part number is for the rear.

[apeas2]

Originally Posted by forcefed

Probably wrong pads in that thread, i remember someone ordered pads for ccb's and put them on their iron rotors.
Btw that part number is for the rear.

yeah, there were a few guys who did. They are so cheap compared to the other two brands, I don't know why everyone isn't using them. People give them great reviews.

[Burrcold]

Originally Posted by apeas2

yeah, there were a few guys who did. They are so cheap compared to the other two brands, I don't know why everyone isn't using them. People give them great reviews.

Buy them and let us know. Guineapig.

[JDUNITNOW]

Originally Posted by Burrcold

Buy them and let us know. Guineapig.

I ran the pads on car for two years and they were the DFC3000 pads. Now I've switched to the 500p pads but you have to get the correct ones. They are a low metallic pad and start showing dust around 100 miles or so depending on how hard you drive. The dust is a white looking dust and easy to wash off. I'm very happy with the brand and ran them on car day one. Made the mistake of using Carbotech and they flunked like crazy.
Attached is the post with correct part number.
https://www.bimmerpost.com/forums/sh...php?p=31073258

[apeas2]

Originally Posted by Burrcold

Buy them and let us know. Guineapig.

Plenty of guys have posted on this forum. Guineapig not needed...Great advice!

[JDUNITNOW]

Originally Posted by apeas2

Has anyone received these pads recently to confirm the front pads do NOT stick out in front of the caliper? The part number without the hardware is 1553-1850-00. The pics I have seen on older threads shows the front pads sticking out about 2mm which is not correct. I dont want to have to go through the hassle of returning them if thats the case. Thanks!

https://www.bimmerworld.com/Brakes/S...-M2-M3-M4.html
Correct pads here... running them on my car for a couple of months now and very happy.

[apeas2]

Originally Posted by JDUNITNOW

https://www.bimmerworld.com/Brakes/S...-M2-M3-M4.html
Correct pads here... running them on my car for a couple of months now and very happy.

Thanks for the useful reply. Can you verify that the pads do not stick out past the caliper on the fronts?

[Burrcold]

Originally Posted by apeas2

Plenty of guys have posted on this forum. Guineapig not needed...Great advice!

It wasn't intended to be a jab. Great post! Sarcasm rules.

[apeas2]

Originally Posted by Burrcold

It wasn't intended to be a jab. Great post! Sarcasm rules.

I am a retiring Mopar guy (Vipers and Srt's etc) and was gonna comment how wound up you Ultimate Driving Machine people are, but now I am one of them!!

[Burrcold]

Originally Posted by apeas2

I am a retiring Mopar guy (Vipers and Srt's etc) and was gonna comment how wound up you Ultimate Driving Machine people are, but now I am one of them!!

Most are okay, but there are a handful of Mo-rons! All good

[JDUNITNOW]

Originally Posted by apeas2

Thanks for the useful reply. Can you verify that the pads do not stick out past the caliper on the fronts?

No, they are a perfect fit and also come with the weights on the pad like the oem .
Also this is my wheel after almost two weeks of driving and pollen is on the roads like mushroom clouds.

[JDUNITNOW]

Originally Posted by apeas2

Thanks for the useful reply. Can you verify that the pads do not stick out past the caliper on the fronts?

Confirm if the pads you have are the same product number as the ones I have from Bimmerworld.

[apeas2]

Originally Posted by JDUNITNOW

No, they are a perfect fit and also come with the weights on the pad like the oem .
Also this is my wheel after almost two weeks of driving and pollen is on the roads like mushroom clouds.

Looks good for the dust, but there is a little pad not covered by the caliper. Never seen that before.

[DoubleDave]

Originally Posted by apeas2

Looks good for the dust, but there is a little pad not covered by the caliper. Never seen that before.

My ISweep 1500 pads are the same