[jimbethesda]

Originally Posted by ipilcher

Trying to figure out how badly I've fscked myself.

I used BimmerCode to disable the ASD earlier today, and I was prompted to save the FSC code to Google Drive. I thought that I had done so, but hours later I just noticed that Google Drive is showing that the FSC file is still "Waiting to upload."

I do see a 316 byte

FSC_...

file in my Google Drive that seemlingly got uploaded today, but I also see references on the interwebs saying that it should be 319 bytes.

Am I hosed? (I.e. will I be able to restore the ASD functionality if I were, for some odd reason, to want to?)

Next time you update your car’s software it will zap all coding.

[Asmedbeats]

The ASD coding is the only thing that doesn’t reset. I think I lost the file too…

[Berzerker]

Originally Posted by Asmedbeats

The ASD coding is the only thing that doesn’t reset. I think I lost the file too…

Someone mentioned you can just put in the code manually, I don't remember exactly what it was, and I can't find the post anymore now...

[G30M]

Originally Posted by Asmedbeats

The ASD coding is the only thing that doesn’t reset. I think I lost the file too…

i have the FSC file but i lost ASD after playing around with Bimmercode and have not been able to get it back.

Bimmercode says everything is there FSC ASD is activated

[Callann]

Hoping someone can assist a new BMW owner. I'm also a Bimmercode virgin.

Connected my Enet cable today and successfully coded the start/stop.

The next feature I was hoping to adjust was the threshold speed for retracting the side mirror. Factory default is 20 kph. Wanting to bump it up to 50.

Do I need new glasses or is the option not available for G80 with ID8?

[gnolivos]

Originally Posted by Callann

Hoping someone can assist a new BMW owner. I'm also a Bimmercode virgin.

Connected my Enet cable today and successfully coded the start/stop.

The next feature I was hoping to adjust was the threshold speed for retracting the side mirror. Factory default is 20 kph. Wanting to bump it up to 50.

Do I need new glasses or is the option not available for G80 with ID8?

It's there and it's a standard feature. Not sure you can go that high though.

[gnolivos]

Here is where I see it

[Callann]

Thanks for the reply gnolivos.

I'll report back in a couple of days when my new specs arrive.

[Callann]

There's something funky going on with my setup it seems.

Running on Samsung S24. I have no FEM Module. I have no Expert Mode. App is flakey, often not being able to read the modules.

It could be my ethernet to USB adapter. I'll get another one to try.

[Berzerker]

Originally Posted by Callann

There's something funky going on with my setup it seems.

Running on Samsung S24. I have no FEM Module. I have no Expert Mode. App is flakey, often not being able to read the modules.

It could be my ethernet to USB adapter. I'll get another one to try.

I don't remember the FEM being available for FA coding but it's been a while since I've been in BC.

Expert modes are available within each module, not just overall in the main menu.

[Callann]

Checking the Bimmercode website it appears mirror threshold speed coding is not an option on the G80.

[gnolivos]

You need a proper module. That one likely doesn't support the modules or expert mode. I had this issue.

[waiting]

Hi all,

Thanks for all of your posts. I coded the warning at start-up off and ASD off today. Sounds much better on the inside.

I was playing around with the ambient light setting and adjusting colors, but I think that's the wrong module. Initially, I received Day Light Running and Light Bend error codes. After power down and restart I decided to revert to a back up code in bimmercode. No errors now; however, I have one question, when daytime running lights are on, besides the halos, are the little LED slits supposed to be on too? I can't remember them being on during the day.

Thanks in advance.

[thatguyM4]

Originally Posted by waiting

Hi all,

Thanks for all of your posts. I coded the warning at start-up off and ASD off today. Sounds much better on the inside.

I was playing around with the ambient light setting and adjusting colors, but I think that's the wrong module. Initially, I received Day Light Running and Light Bend error codes. After power down and restart I decided to revert to a back up code in bimmercode. No errors now; however, I have one question, when daytime running lights are on, besides the halos, are the little LED slits supposed to be on too? I can't remember them being on during the day.

Thanks in advance.

yes they stay on

[m20e3087]

Anyone else having issue connecting via e-net cable on IOS 17.4.1? I. It’s unable to recognize the vehicle.

[waiting]

Originally Posted by m20e3087

Anyone else having issue connecting via e-net cable on IOS 17.4.1? I. It’s unable to recognize the vehicle.

yes, I have to press connect 2 or 3 times, then it works.

[Berzerker]

Originally Posted by m20e3087

Anyone else having issue connecting via e-net cable on IOS 17.4.1? I. It’s unable to recognize the vehicle.

Originally Posted by waiting

yes, I have to press connect 2 or 3 times, then it works.

It takes a while, once you plug it into the phone, for the ethernet adapter to time out DHCP and give itself a private address. Go into your settings and under "Ethernet" (when the device is connected) wait for it to get a 169.254.xx.xx address and then it should connect immediately.

[thatguyM4]

I used a Samsung Fold 5 and the way I connect with Bimmercode or Bimmer utility is with an enet cable from Amazon and a USB to C adapter which i got from Samsung with my Fold 5 - Connecting to my Car :
Open the App _ Put it in Airplane Mode - Go into connections - search ethernet teethering and turn on then go to the app and connect 100X faster then Bluetooth

[waiting]

Originally Posted by Berzerker

It takes a while, once you plug it into the phone, for the ethernet adapter to time out DHCP and give itself a private address. Go into your settings and under "Ethernet" (when the device is connected) wait for it to get a 169.254.xx.xx address and then it should connect immediately.

Thanks Berzerker! Do you know if I can use the same phone to code my wife’s X3 as well? Love not having the warning messages on the M3.

[Berzerker]

Originally Posted by waiting

Thanks Berzerker! Do you know if I can use the same phone to code my wife’s X3 as well? Love not having the warning messages on the M3.

Yes you can

[tm811]

Anyone when they coded activate the hazard lights on emergency braking get a daytime/parking lamp malfunction?

[gnolivos]

Originally Posted by tm811

Anyone when they coded activate the hazard lights on emergency braking get a daytime/parking lamp malfunction?

Many times you will get malfunction warnings Immediately after coding. This is actually pretty normal. You can shut down the engine and start again and notice it will all be cleared out.