[ashtaron14]

I’m wondering if BMW plans to make MP 1000M in 19” or are they just trolling us.

[manuelf]

They are indeed fooling you!
The middle picture (close-up, where you see the size on the tire sidewall) is NOT the M1000, but the 827M in gold/bronze!

If you look carefully, you see, that it has a different wheel-design!
But if the entire row of pictures comes from BMW and they are jumping between M1000 and 827M ... this almost looks like intentional april fooling or whatever?

[mirob]

Originally Posted by manuelf

They are indeed fooling you!
The middle picture (close-up, where you see the size on the tire sidewall) is NOT the M1000, but the 827M in gold/bronze!

If you look carefully, you see, that it has a different wheel-design!
But if the entire row of pictures comes from BMW and they are jumping between M1000 and 827M ... this almost looks like intentional april fooling or whatever?

All those pictures are of the same 1000M wheels. You can see the 19" on the first picture as well. Whether or not it's a troll job, that IDK.

[manuelf]

Originally Posted by mirob

All those pictures are of the same 1000M wheels. You can see the 19" on the first picture as well. Whether or not it's a troll job, that IDK.

Uh - sorry - you are right! The close-up picture gave me totally 827M vibes!
But you are right: You also see the "Performance" imprints on the wheels, which wouldn't be there in case of 827Ms.

TBH: I think getting a 19/20 inch version of the M1000 in addition to the existing 20/21 inch version would be cool! Then you could drive them with the PS4S* (not the Advans) ... and I personally think 21" at the rear is some drawbacks.

[marconi118]

does someone has the correct weights of 1000M and had a look inside the wheels to see the manufacturer name?
sai or bbs or fuchs or team dynamics?

[chris719]

Is there a part number for the 19/20 combo? I can't find anything but 20 and 21.

[Limegrntaln]

Originally Posted by chris719

Is there a part number for the 19/20 combo? I can't find anything but 20 and 21.

I haven't seen it. I would reach out to John4C from BSPK, to see if he can make you a set. He makes the "Millie" in a 19" Also, you can get a better offset, and run without spacers.

Maybe we will see an 827M in the future.

https://www.bspkforged.com/product/m...rue&cst=custom

[marconi118]

nice wheels! but no info on width of set and bore pattern on the site

who produces the oem 1000M?

[SwissMTNAlien]

I really want the 1000M wheels in gold but hate that they seem to rub on stock suspension. A 19"/20" option would be nice!

[dtronics]

Originally Posted by SwissMTNAlien

I really want the 1000M wheels in gold but hate that they seem to rub on stock suspension. A 19"/20" option would be nice!

Yeah, hopefully they come out with a 19/20 set. I’ve been holding off on a set of 827’s and hoping they release a 19/20 set of the 1000M’s.