03-13-2024, 06:17 PM | #1 |
BimmerPost Supporting Vendor
24204
Rep 190,807
Posts |
Cts turbo stage 2+ turbocharger s58 m3 m3 x3m x4m **new product**
CTS Turbo is excited to announce the release of our latest Stage 2+ designed specifically for the BMW S58 platform. This kit builds on the success and knowledge for the previous turbo projects we have made and incorporates new technology to optimize performance and maintain factory fitment. Our engineers utilized transient flow analysis and flow bench testing to optimize the twin scroll turbine housing, while maintaining stock fitment, stock location, and using the stock wastegates. This allows for the use of any stock fitment downpipes, intakes, and charge pipes. The result is an impressive 825whp-900whp. You can simply transfer your factory wastegates, high performance downpipes, intake and charge pipes during the install. No custom parts are needed and all factory installation hardware and gaskets are used! No need for cores to be sent in or purchased. Each turbocharger is VSR balanced to exceed OE tolerances with upgraded heavy-duty bearings and thrust washers. Our turbochargers are designed to move a lot of air at lower boost levels, which means you can make some serious power without over-speeding the turbos, which means reliable performance. Further performance can be gained using larger turbo inlets with this setup. Features: Complete brand new turbocharger; no need for core to be sent it or purchased 316 stainless steel exhaust housings and wastegate components VSR Balanced to exceed OE tolerances Wire-reinforced silicone turbo inlet included Compatible with factory installation hardware (not included) Compatible with factory wastegate actuators (not included, use your original wastegate actuators) Fitment: G80 BMW M3/M3 Competition S58 G82 BMW M4/M4 Competition S58 G87 BMW M2 S58 F97 BMW X3M/ X3M Competition F98 BMW X4M/ X4M Competition
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
03-13-2024, 07:05 PM | #2 |
Lieutenant Colonel
2567
Rep 1,929
Posts |
$3300? That's it? That's what pure charges extra if you don't have cores lolol
Nice alternative to other stock turbo upgrades, which are priced almost as much as a big single.
__________________
Last edited by forcefed; 03-13-2024 at 09:44 PM.. |
Appreciate
0
|
03-13-2024, 09:41 PM | #3 |
Captain
330
Rep 984
Posts |
Incredible bang for buck! I would have went for this had this product being released about 8 months earlier. Are these equivalent to the PS2+ and Mosselmans?
__________________
2022 M3 XDrive - Full Race Turbos - BMC Filters - MAD Catless downpipes - MAD single midpipe - BM3 Flex Fuel Kit - Paul Johnson Flex Fuel - XHP - MPHAS - EBC Bluestuff - PS4S
2023 IX M60 2018 Lotus Exige Sport 410 - Harrop TVS1900 Supercharger - HKS Intake - Larini Headers - Simply Sports Cars Custom Tune - Ohlins TTX - Ferodo DS3.12 - Yokohoma AD09 |
Appreciate
0
|
03-14-2024, 10:34 AM | #6 |
BimmerPost Supporting Vendor
24204
Rep 190,807
Posts |
tough to say if it's comparable to Pure since it's still a brand-new product but we'll know in 6 months to 1 year.
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
Appreciate
0
|
03-14-2024, 03:09 PM | #7 |
BM3 Tuner
290
Rep 270
Posts |
They are similar to stock turbos with a slight increase if you have stock inlets. Without inlets they are very restricted. I would say they are smaller than the pure and Vargas turbos.
__________________
2019 BMW X3M40I - VRSF Downpipe, XHP Stage 3, Nostrum Stage 1 Injectors, VTT PCV and Oil cap.
Paul Johnson Tunes Shop/Development Car |
Appreciate
0
|
03-14-2024, 03:35 PM | #8 |
Lieutenant Colonel
2567
Rep 1,929
Posts |
They're also half the price, that needs to be taken into consideration. Is 850whp not enough?
If you're spending $7500 for pure turbo's you might as well get a single for a 1-2k more. Upgraded stock turbo's shouldn't cost $7500.
__________________
|
03-14-2024, 05:12 PM | #10 |
BM3 Tuner
290
Rep 270
Posts |
Yes tune is recommended!
__________________
2019 BMW X3M40I - VRSF Downpipe, XHP Stage 3, Nostrum Stage 1 Injectors, VTT PCV and Oil cap.
Paul Johnson Tunes Shop/Development Car |
Appreciate
0
|
03-15-2024, 03:29 AM | #11 | |
Captain
330
Rep 984
Posts |
Quote:
That could give an approximation on how they might compare to Full Race, Pures and others. AFAIK Pure Stg2s has same compressor and turbine size measurements as the Full Races.
__________________
2022 M3 XDrive - Full Race Turbos - BMC Filters - MAD Catless downpipes - MAD single midpipe - BM3 Flex Fuel Kit - Paul Johnson Flex Fuel - XHP - MPHAS - EBC Bluestuff - PS4S
2023 IX M60 2018 Lotus Exige Sport 410 - Harrop TVS1900 Supercharger - HKS Intake - Larini Headers - Simply Sports Cars Custom Tune - Ohlins TTX - Ferodo DS3.12 - Yokohoma AD09 |
|
Appreciate
1
somer966.00 |
03-15-2024, 10:52 AM | #12 | ||
BimmerPost Supporting Vendor
24204
Rep 190,807
Posts |
Quote:
Quote:
Unfortunately i don not know the sizes, i posted all the info that i got from CTS Turbo
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
||
Appreciate
1
Lupeskew593.50 |
03-19-2024, 11:31 PM | #14 |
Second Lieutenant
183
Rep 276
Posts |
weary when the description states.
"Our engineers utilized transient flow analysis and flow bench testing to optimize the twin scroll turbine housing, while maintaining stock fitnent " ... Twin scroll housing? How? S58 turbos are Mono scroll. |
Appreciate
1
Impulse20098384.50 |
03-20-2024, 11:02 AM | #15 |
BimmerPost Supporting Vendor
24204
Rep 190,807
Posts |
Agree, if you are set on getting this kit and that's the only thing stopping you, CTS will have more info on the specs.
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
Appreciate
0
|
03-20-2024, 03:46 PM | #16 | |
Captain
1223
Rep 855
Posts |
Quote:
https://www.ctsturbo.com/product/cts...o-upgrade-kit/ |
|
03-21-2024, 11:29 AM | #17 | |
BimmerPost Supporting Vendor
24204
Rep 190,807
Posts |
Quote:
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
|
Appreciate
1
M_Torx328.00 |
03-21-2024, 02:14 PM | #20 | |
BimmerPost Supporting Vendor
24204
Rep 190,807
Posts |
Quote:
my phone number is in my signature or you can dm me for the price.
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
|
Appreciate
0
|
03-21-2024, 02:42 PM | #21 |
Captain
1223
Rep 855
Posts |
|
Appreciate
0
|
03-22-2024, 10:24 AM | #22 |
BimmerPost Supporting Vendor
24204
Rep 190,807
Posts |
Sounds good
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|