[Valvetronic Designs]

Originally Posted by LeRoy

Alright. It’s April. Let’s get these things out!

We are working it!! Stay tuned

[GTS Daddy]

Any sound clips revving it out in comfort mode with the mid-pipe only? Rasp or drone in any mode?

[ItsConnor]

Is there a rough estimate for current wait times on the equal length full exhaust? Taking delivery late June / early July and wanting to get an idea of when to place order

[Valvetronic Designs]

Originally Posted by GTS Daddy

Any sound clips revving it out in comfort mode with the mid-pipe only? Rasp or drone in any mode?

No drone and the sound is super smooth, take a listen here:

[Valvetronic Designs]

Originally Posted by ItsConnor

Is there a rough estimate for current wait times on the equal length full exhaust? Taking delivery late June / early July and wanting to get an idea of when to place order

We are working to fulfill the preorders that have been placed back in February and are planning on deliveries taking place at the very end of April and into May. At this time as the system are in preorder you can expect roughly 4-6 week for your system to be crafted. As we continue to ramp up production this timing may change but these systems are a lot more tricky to craft due to the equalization section up front! We look forward to earning your support

[Valvetronic Designs]

Beauty shot for you all!

[ItsConnor]

Does the valve controller need to be purchased seperately for the EL valved exhaust system? If so, is it possible to provide a link installed on G82. Apologies if the question is self explanatory, new to Valvetronic systems

[LeRoy]

Originally Posted by ItsConnor

Does the valve controller need to be purchased seperately for the EL valved exhaust system? If so, is it possible to provide a link installed on G82. Apologies if the question is self explanatory, new to Valvetronic systems

If you buy the system it comes with a valve controller.

[Nate.G82]

Originally Posted by Valvetronic Designs

Beauty shot for you all!

Are those the 1x1 carbon tips?

[VioletBlue_M3]

Mine arrives tomorrow according to Fedex tracking. Hope I can get the time to install this weekend.

[i_love_cars]

confirmed - FedEx shipping notification and arriving on Saturday. My G80 doesn't even arrive until June but I didn't want to miss the boat on this exhaust so I ordered it early for a day 1 install when I get my car :P

Best exhaust IMO for G8x platform

[Valvetronic Designs]

Looking forward to you guys enjoying! We’re excited to hear your feedback🤘

[Valvetronic Designs]

Originally Posted by i_love_cars

confirmed - FedEx shipping notification and arriving on Saturday. My G80 doesn't even arrive until June but I didn't want to miss the boat on this exhaust so I ordered it early for a day 1 install when I get my car :P

Best exhaust IMO for G8x platform

Have the dealer put it on during the PDI so you never have to hear the car stock 🤣

[LeRoy]

Yeahhhh I’m gonna need mine to go ahead and ship now. That’d be great. Thanks.

[jjl5508]

Originally Posted by LeRoy

Yeahhhh I’m gonna need mine to go ahead and ship now. That’d be great. Thanks.

Same. I ordered a titanium exhaust and I was supposed to get it installed while my PPF and ceramic coating were being done. Being notified it’s going to be another month before it’ll be shipped????

[LeRoy]

That sucks! Any of the orders being fulfilled so far titanium or all stainless

[Valvetronic Designs]

Hey everyone, due to the equalization section of the mid pipe, it all has to be pie cutted in order to fit properly in that area. It’s extremely time consuming and complicated to do this, Hence the delay. We are working as quickly as possible, in order to get these titanium orders out as we know, everybody is very excited. We appreciate your patience and look forward to delivering the worlds greatest Exhaust experience to you and your G80s very soon. Please feel free to reach out to us anytime at info@valvetronic.com 🤘

[VioletBlue_M3]

Arrived yesterday, installed today. No issues other than I had to work on my back with the car on jack stands. Adjusting the tips took some time, might fine tune them later as I had to call it a job done with family dinner approaching. No sound clips or videos needed as Valvetronic has already posted those. Running stock cats with equal length stainless catback and 1x1 carbon tips. Sounds great around the neighborhood, but I need a proper warmed up drive to open it up and compare to my last setup.

[Valvetronic Designs]

Originally Posted by tonypgst

Arrived yesterday, installed today. No issues other than I had to work on my back with the car on jack stands. Adjusting the tips took some time, might fine tune them later as I had to call it a job done with family dinner approaching. No sound clips or videos needed as Valvetronic has already posted those. Running stock cats with equal length stainless catback and 1x1 carbon tips. Sounds great around the neighborhood, but I need a proper warmed up drive to open it up and compare to my last setup.

[img]https://live.staticflickr.com/65535/52840237577_1588e9a517_c.jpg[/img]

[img]https://live.staticflickr.com/65535/52840809681_0b1cfe63fb_c.jpg[/img]

[img]https://live.staticflickr.com/65535/52841219165_1d13342960_c.jpg[/img]

You are working fast! Excited for you to enjoy more. Definitely post a few clips of you can! I think folks would definitely appreciate more clips showcasing how good this setup sounds 🤘

[i_love_cars]

Originally Posted by Valvetronic Designs

Have the dealer put it on during the PDI so you never have to hear the car stock 🤣

Honestly would be asking my dealer to do that if I didn't have a lift in my garage

I'm in the production queue now so it's gonna be a painful 6-8 weeks I think staring at my valvetronic and kw HAS boxes with nothing to do but twiddle my thumbs

I will report back in this thread once I have the exhaust installed and reviewed

[ItsConnor]

Do you have pictures to highlight the difference between the burnt and raw titanium burnt tips? Unsure if there is any real different appearance wise

[VioletBlue_M3]

Sharing some quick videos I made today to show cold start and revs. Unsure if I'll be installing my non catted downpipes at this point. Likely will because I like controlled chaos, but this is sounding good. Need to figure out a place to do some drive by videos.

Stainless Valvetronic Equal Length Cat Back / Stock Downpipes / Dahler valve controller default to Open

Cold Start

Sport+ Revs