[SigmaShift]

Originally Posted by blueg80M3

Would that size difference be an issue?

Yes. 275/30/20 and 295/30/20 are not a good combo. You’ll want a 285/30/20 for the front if you’re running 295/30/20 rears for xdrive

[Tobster3]

Originally Posted by VELGEN WHEELS

Going on a G80 next week!

Velgen SL-12 Brushed Bronze Center | Polish Lip

20x10 | 20x11

Don’t believe we’ve seen pics of these installed yet! Don’t keep us in suspense!

[JDUNITNOW]

Originally Posted by viciousmo

Set of BCForged wheels finished. I should have them mounted in a couple weeks.

Awesome, I went with the signature center caps also. It gives the wheel a different look.

[vpegany]

Originally Posted by g80.py

What are those sexy beast 😍

HRE S104SC

[G80M3_Latte22]

Originally Posted by SigmaShift

Yes. 275/30/20 and 295/30/20 are not a good combo. You’ll want a 285/30/20 for the front if you’re running 295/30/20 rears.

Do you mind to elaborate on this statement? I am considering using 275/30/20 in the front to avoid rubbing. The rear will be 295/30/20. I am curious to learn more about this. Thanks in advance.

[Tobster3]

Originally Posted by G80M3_Latte22

Do you mind to elaborate on this statement? I am considering using 275/30/20 in the front to avoid rubbing. The rear will be 295/30/20. I am curious to learn more about this. Thanks in advance.

Are you XDriver or RWD?

See attached comparisons. With 275/30 the rear diameter is almost 2% larger. With 285/20, it’s 1.1%. I’m no expert but have read with XDrive, you want to keep it at 1% or lower.

[G80M3_Latte22]

Originally Posted by Tobster3

Are you XDriver or RWD?

See attached comparisons. With 275/30 the rear diameter is almost 2% larger. With 285/20, it’s 1.1%. I’m no expert but have read with XDrive, you want to keep it at 1% or lower.

Mine is RWD, I don't mind going to 285 but just concerned with rubbing with wider tires.

[818M3]

Originally Posted by vpegany

💧

Do you have anymore photos of your car??

[SigmaShift]

Originally Posted by G80M3_Latte22

Do you mind to elaborate on this statement? I am considering using 275/30/20 in the front to avoid rubbing. The rear will be 295/30/20. I am curious to learn more about this. Thanks in advance.

xDrive cars need their front and wheel tire overall diameter to be within 1-1.1%, or else the car will throw drivetrain errors. If your car is RWD only, then you won't have any issues.

This being said, a 285/30/20 will not rub in the front if you're using a stock rear wheel as a front.

[vpegany]

Originally Posted by 818M3

Do you have anymore photos of your car??

Yes

[viciousmo]

Originally Posted by Tobster3

Are you XDriver or RWD?

See attached comparisons. With 275/30 the rear diameter is almost 2% larger. With 285/20, it’s 1.1%. I’m no expert but have read with XDrive, you want to keep it at 1% or lower.

I've been adhering to 1% or lower for my G80 and my previous G20. However, I came across a couple of xDrive owners that have been running a 2% difference without any drivetrain issues.

[pperc]

I've been thinking about HRE 527. Anyone have any thoughts on brushed clear with gloss charcoal windows? Or should I keep it simple and stick with all brushed clear with polished lips. Car is skyscraper grey w/ stealth PPF

[phillychoi]

Originally Posted by pperc

I've been thinking about HRE 527. Anyone have any thoughts on brushed clear with gloss charcoal windows? Or should I keep it simple and stick with all brushed clear with polished lips. Car is skyscraper grey w/ stealth PPF

I'm picking up my 527S next week. Mine are frozen clear face with polished lip. Are you in Philly? If so, you can come and check mine after installed them.

[pperc]

Originally Posted by phillychoi

I'm picking up my 527S next week. Mine are frozen clear face with polished lip. Are you in Philly? If so, you can come and check mine after installed them.

Nice! What color is your car?
You got the 3-piece it sounds like? I wasn’t going to do frozen because that would be too much matte.


Yes, I’m in Montco. You?

[phillychoi]

Originally Posted by pperc

Nice! What color is your car?
You got the 3-piece it sounds like? I wasn’t going to do frozen because that would be too much matte.


Yes, I’m in Montco. You?

My car is Brooklyn Gray and the wheels are two piece I believe.

I’m near Montgomery Mall.

[JEP09]

G025LC
20x10 ET:15
20x11 ET: 15

Going to wait until spring to mount them.

[phillychoi]

Originally Posted by pperc

Nice! What color is your car?
You got the 3-piece it sounds like? I wasn’t going to do frozen because that would be too much matte.


Yes, I’m in Montco. You?

Here is mine.

[pperc]

Originally Posted by phillychoi

Here is mine.

Which style lip edge did you get?

[phillychoi]

Originally Posted by pperc

Which style lip edge did you get?

Flange lip with engraved HRE logo.

[pperc]

Originally Posted by phillychoi

Flange lip with engraved HRE logo.

How did you land on flange and do you like it?
I thought they all came with the HrE engraved logo. Are there other options?

[phillychoi]

Originally Posted by pperc

How did you land on flange and do you like it?
I thought they all came with the HrE engraved logo. Are there other options?

I bought them used so I didn't order. However I like the flange lip over angled lip which I have other wheels on my Ferrari. Not sure about the logo because I have seen no logo wheels.

[pperc]

Originally Posted by phillychoi

I bought them used so I didn't order. However I like the flange lip over angled lip which I have other wheels on my Ferrari. Not sure about the logo because I have seen no logo wheels.

Damn where did you find such beautiful wheels used for sale? And can I ask what you paid for them?

An M3 and a Ferrari? Nice.