[Hit_Apex]

Originally Posted by YasPlz_CSL

Are you currently 20" All around?
I had 305's on my LM's | They were okay little to no rubbing
I do think a 295/30 might be the safest route to go to avoid all that

Yes safest, I moved to 305 from 295 chasing straight-line traction and the improvement was minimal and the sidewall is noticeably bulbous on 10.5" width. The photo is with 19" up front, 15MM spacer, but with -3.2 camber.

[YasPlz_CSL]

Originally Posted by Hit_Apex

Yes safest, I moved to 305 from 295 chasing straight-line traction and the improvement was minimal and the sidewall is noticeably bulbous on 10.5" width. The photo is with 19" up front, 15MM spacer, but with -3.2 camber.

Cool
Pair of 20" CSL Rims will arrive later today
295/30/20 CUP2R's will arrive tomorrow

I will get them mounted and installed ASAP

With my stock wheels 19/20
I was running a 18/15mm spacer setup

Follow along for more pics on instagram
Yasplz_CSL

[adam_ludera]

Does anyone have 827M on IoMG M4 and could share some pictures?

[Fugly M3]

Originally Posted by adam_ludera

Does anyone have 827M on IoMG M4 and could share some pictures?

There are pictures of gold ones on a vert earlier in this thread. Review the chain.

[adam_ludera]

Sorry, I meant to ask about black ones. I've went through all the pages before asking the question

[Fugly M3]

Originally Posted by adam_ludera

Sorry, I meant to ask about black ones. I've went through all the pages before asking the question

Maybe try the IOMG thread. A lot more browsing, but a lot more material. Edit...nvm, I just did a search there, not much and saw you were looking. If you have IOMG and already have the black 826s, I'd say don't bother. Having had both, the 827 in gold and the black 826 on my new M4, I like the 827 better, but I'd only do them in gold. I think the 826 are fine in black unless you have to have the matte look. I will say, despite my expectations, the 826s are actually the easiest to clean of the lot. I've had 825, 826 and 827. Something about the uniformity of the 826s and the size of the openings makes them easier to clean than the others - counterintuitive, but it's something I immediately noticed.

[adam_ludera]

Originally Posted by Fugly M3

Maybe try the IOMG thread. A lot more browsing, but a lot more material. Edit...nvm, I just did a search there, not much and saw you were looking. If you have IOMG and already have the black 826s, I'd say don't bother.

First of all, thanks for all the trouble you went to check it out. I actually know IoMG thread inside out too, plus asked question there before doing it here.

Currently I have 825 bi-color. Whilst I like them I want another set for summer and I'm also looking for more sporty looks. I don't like black gloss look of 826M and I had a car previously with matte black wheels and that looked much better than gloss.

I also saw 827M on CSL but the car was in matte Brooklyn Grey, and gold ones on black CS. Both looked really good.

[Fugly M3]

Originally Posted by adam_ludera

First of all, thanks for all the trouble you went to check it out. I actually know IoMG thread inside out too, plus asked question there before doing it here.

Currently I have 825 bi-color. Whilst I like them I want another set for summer and I'm also looking for more sporty looks. I don't like black gloss look of 826M and I had a car previously with matte black wheels and that looked much better than gloss.

I also saw 827M on CSL but the car was in matte Brooklyn Grey, and gold ones on black CS. Both looked really good.

Just splurge for the gold. You won’t regret it. Try BMW of Orland Park. Dennis Kuk in parts usually has the best prices. They do charge for shipping but not tax.

[Bur4k]

Originally Posted by Spoolin Montego

I think I’m the first Dravit with them in gold 😎😎

Looks amazing. Do you additional photos? Will be happy to see under different light.

[adam_ludera]

Originally Posted by Fugly M3

Just splurge for the gold. You won’t regret it. Try BMW of Orland Park. Dennis Kuk in parts usually has the best prices. They do charge for shipping but not tax.

Thanks. Gold are too much of a blink to me, but I went ahead and ordered the black ones. Will see, I might be the first IoMG with those wheels so would work as a guinea pig If they don't work, I will get them painted to a bit lighter colour, maybe towards gold but not that strong as the original.

[Spoolin Montego]

Originally Posted by Bur4k

Looks amazing. Do you additional photos? Will be happy to see under different light.

Here you go!

[adam_ludera]

827M on Isle of Man Green. Still getting used to black wheels, but generally I think they look better than 826M.

[mieh100]

Originally Posted by adam_ludera

827M on Isle of Man Green. Still getting used to black wheels, but generally I think they look better than 826M.

Iam planning to have an extra set of wheels and leaning toward the 827M on my IOMG m3 . They just look great on that color.

[M4LAKA]

I bought a square set of 20x10.5 827m gold wheels for my frozen black M4. I swapped over the stock rear Pzero Corsas and bought 2 more new ones. Hope to have pics next week after I get the car back from all the cooling and suspension upgrades.

[Limegrntaln]

Originally Posted by M4LAKA

I bought a square set of 20x10.5 827m gold wheels for my frozen black M4. I swapped over the stock rear Pzero Corsas and bought 2 more new ones. Hope to have pics next week after I get the car back from all the cooling and suspension upgrades.

I love a 20/20 setup. Do post when you get them installed.

[0-60Motorsports]

Originally Posted by M4LAKA

I bought a square set of 20x10.5 827m gold wheels for my frozen black M4. I swapped over the stock rear Pzero Corsas and bought 2 more new ones. Hope to have pics next week after I get the car back from all the cooling and suspension upgrades.

That’ll look awesome.

[M4LAKA]

Car is almost done after extensive modifications. However mechanic just sent me this sneak peak.

[M4LAKA]

20 square 827m in gold. Sun was in front so had to bring exposure down, so colour might be off. But it looks awesome.

[Elias Gondevas]

Originally Posted by M4LAKA

Car is almost done after extensive modifications. However mechanic just sent me this sneak peak.

Re Malaka, the wheels are perfect! 🇬🇷

[M4LAKA]

Originally Posted by Elias Gondevas

Re Malaka, the wheels are perfect! 🇬🇷

Looks great with yellow drl

[CMW33]

Originally Posted by M4LAKA

Looks great with yellow drl

Looking verry good. It could be photo or angles, but I do think you could do with a bit of spacer in back. They are more sunken in than I would've expected.

[M4LAKA]

Originally Posted by CMW33

Looking verry good. It could be photo or angles, but I do think you could do with a bit of spacer in back. They are more sunken in than I would've expected.

You are correct. I am letting ohlins sit until Friday, and then realignment and 15mm spacers in the rear.