[echtors]

Does this need to be re-coded after every software update?

[kgelfen360]

Originally Posted by Malloy

Perfect, I need to get this going!

What’s weird is they do the orange in the light and that stupid orange marker in the fender. These are US requirements. But why can’t it be that the orange side marker is enough. It’s easy to get rid of that one. Why did they do the light as well.

[samsamdar]

Bumping this up - does anyone know the definitive way to turn off the sidemarkers on an iDrive 8 G8X with lasers? I tried messing with the LMM1 settings in the FLE modules but it didn't work

[samsamdar]

Originally Posted by samsamdar

Bumping this up - does anyone know the definitive way to turn off the sidemarkers on an iDrive 8 G8X with lasers? I tried messing with the LMM1 settings in the FLE modules but it didn't work

Anyone? lol

[McLaren720s]

Originally Posted by samsamdar

Bumping this up - does anyone know the definitive way to turn off the sidemarkers on an iDrive 8 G8X with lasers? I tried messing with the LMM1 settings in the FLE modules but it didn't work

kubax86 can code it out for you. Hit him up

[samsamdar]

Originally Posted by McLaren720s

kubax86 can code it out for you. Hit him up

I don’t like paying for coding lol - I’ll just tinker til I figure it out

[big_ed]

Originally Posted by samsamdar

I don’t like paying for coding lol - I’ll just tinker til I figure it out

100%

[thatguyM4]

This can be done through Bimmer utility guys super easy to do use the following
Coding out the Side marker Lamps G82 M4
go to FLM2 - there is a Left and Right Side so you will have to do both - Search Duty:
you will see the following

LM03_DUTY_CYCLE_BINNING_CLASS1 through 4 - you need to change the Values from Wert_2( C8) to Wert_1(00) to all of them

and there you go side marker lamp deleted

[Berzerker]

Originally Posted by thatguyM4

This can be done through Bimmer utility guys super easy to do use the following
Coding out the Side marker Lamps G82 M4
go to FLM2 - there is a Left and Right Side so you will have to do both - Search Duty:
you will see the following

LM03_DUTY_CYCLE_BINNING_CLASS1 through 4 - you need to change the Values from Wert_2( C8) to Wert_1(00) to all of them

and there you go side marker lamp deleted

Thanks, this worked. I noticed there's also a CLASS0 code, is that also required to be changed? I did include it in the changes and it doesn't seem to have done anything unexpected.

[thatguyM4]

Yeah you don't need too I double checked and it worked flawless also did the added steps for anti dazzle and it worked.alot better not so crazy sensitive and stays on longer .works great though

[BIGW0RM]

Whats this bimmer ulitity? Where that come from?

[Berzerker]

Originally Posted by BIGW0RM

Whats this bimmer ulitity? Where that come from?

BimmerUtility is another coding tool that's a bit more involved since it uses ESYS data to get more indepth options for coding. Something sort of in-between something like Bimmercode and full ESYS coding.

[BIGW0RM]

Originally Posted by Berzerker

BimmerUtility is another coding tool that's a bit more involved since it uses ESYS data to get more indepth options for coding. Something sort of in-between something like Bimmercode and full ESYS coding.

Oh interesting. I will have to look into that. I apprciate the heads up.

[Diesel power]

so is this not something that you can do with Bimmercode? I am coming back to BMW after a long time away (used Esys on a laptop back then) and will likely buy something for coding. What's the best tool now?

[Berzerker]

Originally Posted by Diesel power

so is this not something that you can do with Bimmercode? I am coming back to BMW after a long time away (used Esys on a laptop back then) and will likely buy something for coding. What's the best tool now?

I don't believe the FLM2 module is accessible in Bimmercode/link. Bimmerutility uses ESYS and ESYS data to make that and other modules more "accessible" into a Bimmercode-style format using ESYS data and codes it using the ESYS utility, but in a more user-friendly format.

I use both Bimmercode and Bimmerutility, but the latter requires more setup (ESYS and psdzdata) and a more expensive license.

[thatguyM4]

Originally Posted by Diesel power

so is this not something that you can do with Bimmercode? I am coming back to BMW after a long time away (used Esys on a laptop back then) and will likely buy something for coding. What's the best tool now?

In my opinion Bimmer utility - its translate somewhat to English to know what values your looking at to code - I stumbled on changing the color of my car so now the wrap is the same color and my car instead of the factory Blue ... Finding alot of stuff in there - Bimmercode I would say its for the average first entry to coding - you cant mess up anything at all -

[M4nication]

Originally Posted by thatguyM4

This can be done through Bimmer utility guys super easy to do use the following
Coding out the Side marker Lamps G82 M4
go to FLM2 - there is a Left and Right Side so you will have to do both - Search Duty:
you will see the following

LM03_DUTY_CYCLE_BINNING_CLASS1 through 4 - you need to change the Values from Wert_2( C8) to Wert_1(00) to all of them

So I'm not sure what I'm doing wrong. But I've done exactly what you've described here. As soon as I code it in, I get a warning light on my dash that the lights have a malfunction. As soon as I revert 1-4 back to Wert_2, it goes away immediately. Am I missing something here? 2024 M4CX with ID8.

Also was trying to code the anti-dazzle stuff so I can use all that, and I can't seem to figure that out either. So as of right now, I'm $100 poorer from buying BimmerUtility, but still have my amber corners on and still no anti-dazzle 🤦🤦

[Berzerker]

Originally Posted by M4nication

So I'm not sure what I'm doing wrong. But I've done exactly what you've described here. As soon as I code it in, I get a warning light on my dash that the lights have a malfunction. As soon as I revert 1-4 back to Wert_2, it goes away immediately. Am I missing something here? 2024 M4CX with ID8.

Also was trying to code the anti-dazzle stuff so I can use all that, and I can't seem to figure that out either. So as of right now, I'm $100 poorer from buying BimmerUtility, but still have my amber corners on and still no anti-dazzle ����

That's normal. You'll get light malfunction errors whenever you code FLM2. Turning off iDrive/locking the car and getting back in later will just clear the code. You can ignore it.

Anti-Dazzle is much more involved as it requires VO coding as well (the codes that you see in your car specs, one of them is decoding anti-dazzle for the US market, that's what you remove) along with some additional FA coding.

I can send you some documentation via PM but it's not for the faint of heart.

[thatguyM4]

Originally Posted by Berzerker

That's normal. You'll get light malfunction errors whenever you code FLM2. Turning off iDrive/locking the car and getting back in later will just clear the code. You can ignore it.

Anti-Dazzle is much more involved as it requires VO coding as well (the codes that you see in your car specs, one of them is decoding anti-dazzle for the US market, that's what you remove) along with some additional FA coding.

I can send you some documentation via PM but it's not for the faint of heart.

The Anti Dazzle is in the Bimmer utility they made it super easy to after you do the Bimmercode process - Less Sensitive better control of the lights - Tested and works great on my 2021 M4 Comp

[thatguyM4]

Originally Posted by M4nication

So I'm not sure what I'm doing wrong. But I've done exactly what you've described here. As soon as I code it in, I get a warning light on my dash that the lights have a malfunction. As soon as I revert 1-4 back to Wert_2, it goes away immediately. Am I missing something here? 2024 M4CX with ID8.

Also was trying to code the anti-dazzle stuff so I can use all that, and I can't seem to figure that out either. So as of right now, I'm $100 poorer from buying BimmerUtility, but still have my amber corners on and still no anti-dazzle 🤦🤦

Dont think your a 100.00 poorer that Bimmer utility is a great tool to have -
The way I did the Anti Dazzle is through Bimmercode then Bimmer utility to finish the last process - I see the other member sent you something - 2024 should work

[Berzerker]

Originally Posted by thatguyM4

The Anti Dazzle is in the Bimmer utility they made it super easy to after you do the Bimmercode process - Less Sensitive better control of the lights - Tested and works great on my 2021 M4 Comp

They have a button for the quick FA coding stuff but it still requires you to do VO coding separately. It can be done in BimmerUtility, but it still requires setting up ESYS and psdzdata, if you want the "full" anti-dazzle functionality.

[BlaSTiWi]

Berzerker could I get a copy of your doc, pls.

tkx much in adv.!

Originally Posted by Berzerker

That's normal. You'll get light malfunction errors whenever you code FLM2. Turning off iDrive/locking the car and getting back in later will just clear the code. You can ignore it.

Anti-Dazzle is much more involved as it requires VO coding as well (the codes that you see in your car specs, one of them is decoding anti-dazzle for the US market, that's what you remove) along with some additional FA coding.

I can send you some documentation via PM but it's not for the faint of heart.