[chris3g]

Originally Posted by kgelfen360

I read that myself. I am asking why ? What’s the difference where u put the little box?


And my other question is 3rd Mode (Serial) is OEM setting ?

It doesn’t have to be, they give you sufficient cabling to do either , some people just prefer to put it inside.

The 3rd setting is OEM, yes.

[Berzerker]

Originally Posted by docjavier

You will have to remove the driver side rear wheel aluminum cover and black plastic to gain access the the rubber grommet (in the photo). Then just plug the harness and route along the OEM valve cabling. Super easy.

Is this all underneath? Anything behind the wheel? Just a bit confused on the perspective.

I found this thread as well, but it still doesn't make it completely clear.

It looks like both cables are routed through that one grommet, is one of the cables then routed in that heat shielding to the other side?

[docjavier]

The grommet that I used is inside the battery compartment on the driver side.



You will need to remove about 10 screws and 2 plastic nuts holding the metal and plastic covers next to the rear driver's wheel. Once you move that out of the way. You will see the grommet from the outside. The hard part is removing the aluminum sheet and plastic cover.

I routed the SST cables following the original valve controller cables.

[mike@x-ph.com]

Originally Posted by docjavier

The grommet that I used is inside the battery compartment on the driver side.



You will need to remove about 10 screws and 2 plastic nuts holding the metal and plastic covers next to the rear driver's wheel. Once you move that out of the way. You will see the grommet from the outside. The hard part is removing the aluminum sheet and plastic cover.

I routed the SST cables following the original valve controller cables.

Thank you for sharing

[mike@x-ph.com]

50 controllers on the way to our Las Vegas warehouse

[Berzerker]

Originally Posted by mike@x-ph.com

50 controllers on the way to our Las Vegas warehouse

Is this the correct product?

I'm definitely looking forward to your writeup, still a bit confused on which panels I should be removing for access to the grommet and then how to route it to the other side.

[Sleepy_M3C]

Originally Posted by mike@x-ph.com

50 controllers on the way to our Las Vegas warehouse

Could you PM with price? Also, wondering if I should order with the 2 remote or not. If somehow I lose a remote, could we order just the remote?

[chris3g]

Originally Posted by Sleepy_M3C

Could you PM with price? Also, wondering if I should order with the 2 remote or not. If somehow I lose a remote, could we order just the remote?

I ordered a couple identical extra remotes from Amazon for like $10, they are easily programmed using the original and I just have them as backups.

[Sleepy_M3C]

Originally Posted by chris3g

I ordered a couple identical extra remotes from Amazon for like $10, they are easily programmed using the original and I just have them as backups.

Thanks! Found the exact same remote on amazon. Probably won't need it... but you never know

[chris3g]

Originally Posted by Sleepy_M3C

Thanks! Found the exact same remote on amazon. Probably won't need it... but you never know

Just be sure the one you order is 12v because they also come in 3v and look the same.

[mike@x-ph.com]

Originally Posted by Berzerker

Is this the correct product?

Correct

Originally Posted by Sleepy_M3C

Could you PM with price? Also, wondering if I should order with the 2 remote or not. If somehow I lose a remote, could we order just the remote?

No need for extra remotes, dm sent

[docjavier]

Originally Posted by Sleepy_M3C

Could you PM with price? Also, wondering if I should order with the 2 remote or not. If somehow I lose a remote, could we order just the remote?

I ordered 2, not that expensive. Better save than sorry.

[mike@x-ph.com]

Originally Posted by docjavier

I ordered 2, not that expensive. Better save than sorry.

Cant disagree with that

[phillychoi]

Just got mine today and installed it. Works great. Instruction says the controller unit is waterproof so I mounted it outside with 3M tape.

[JY01]

Received and installed mine today as well, mounted the box in an opening under the car. Sounds great paired with my midpipe 👌

[TselaG80]

PM me for pricing please

[mike@x-ph.com]

Originally Posted by phillychoi

Just got mine today and installed it. Works great. Instruction says the controller unit is waterproof so I mounted it outside with 3M tape.

Originally Posted by JY01

Received and installed mine today as well, mounted the box in an opening under the car. Sounds great paired with my midpipe 👌

Originally Posted by TselaG80

PM me for pricing please

Dm sent

[emthreepa]

Originally Posted by mike@x-ph.com

Dm sent

Can you message me as well? Thank you

[anthony412]

Installed today in under thirty minutes. Was super easy. 3M’d the box behind the black plastic (as shown in many YouTube videos) where it will be out of the elements. Sounds amazing!

[mike@x-ph.com]

Originally Posted by emthreepa

Can you message me as well? Thank you

dm sent

Originally Posted by anthony412

Installed today in under thirty minutes. Was super easy. 3M’d the box behind the black plastic (as shown in many YouTube videos) where it will be out of the elements. Sounds amazing!

[Dravitdaddy]

Originally Posted by mike@x-ph.com

50 controllers on the way to our Las Vegas warehouse

Hey Mike. I placed on order for one of these on 8/21. I got dhl tracking info, but nothing has happened. Are you filling the orders, or will it be coming from Germany ?

[Berzerker]

Originally Posted by Dravitdaddy

Hey Mike. I placed on order for one of these on 8/21. I got dhl tracking info, but nothing has happened. Are you filling the orders, or will it be coming from Germany ?

Mine has DHL tracking direct from germany so I suspect yours is too.