[Kaneki]

     Featured on BIMMERPOST.com

Hello everyone,

I am very interested in installing the M Performance parts set. However, I have some concerns about ground clearance. I understand that the standard clearance for this model is 120 mm, but I am curious if installing the M Performance parts, including a front splitter, would alter this.

Has anyone installed these parts and can provide insight into how it impacts the car's ground clearance at the front, side, and rear? I live in a country where road conditions vary significantly, so I want to avoid accidentally scraping the car.

I would greatly appreciate any information and suggestions. Thanks!

[wavyyyy]

I have the M Perf front lip on stock height and it hasn’t really affected clearance. I still go over speed bumps at 15 mph lol. I’ve lowered cars in the past but honestly the peace of mind I’ve had this way, I don’t think I’m going to lower this time.

I live in NYC and commute to Brooklyn on a daily basis with some of the worst roads imaginable. Some of the roads here are genuinely as bad as Pakistan where my family is from and that’s a 3rd world country lol.

[G MONEY]

Originally Posted by Kaneki

Hello everyone,

I am very interested in installing the M Performance parts set. However, I have some concerns about ground clearance. I understand that the standard clearance for this model is 120 mm, but I am curious if installing the M Performance parts, including a front splitter, would alter this.

Has anyone installed these parts and can provide insight into how it impacts the car's ground clearance at the front, side, and rear? I live in a country where road conditions vary significantly, so I want to avoid accidentally scraping the car.

I would greatly appreciate any information and suggestions. Thanks!

These things are Jeeps from the factory. Lol. You will be fine

[forcefed]

This guy maybe has 1-2 inches of ground clearance at best😂

[G MONEY]

Originally Posted by forcefed

This guy maybe has 1-2 inches of ground clearance at best😂

Such a beautiful front:-)

[vmalho2]

You’ll be fine, I have a front M perf splitter/lip and am lowered 20MM more w/ OEM MPHAS, have good amount to clear 99.9% of the time.

[as7920]

Originally Posted by Kaneki

Hello everyone,

I am very interested in installing the M Performance parts set. However, I have some concerns about ground clearance. I understand that the standard clearance for this model is 120 mm, but I am curious if installing the M Performance parts, including a front splitter, would alter this.

Has anyone installed these parts and can provide insight into how it impacts the car's ground clearance at the front, side, and rear? I live in a country where road conditions vary significantly, so I want to avoid accidentally scraping the car.

I would greatly appreciate any information and suggestions. Thanks!

Had an F80 with CS front splitter and my new G82 xDrive with MP Splitter has more clearance. My suspension is stock, no drop.

[Skyscraper]

I have the BMW kit set at 15mm drop with Turner lip.
No issues scraping on driveways or speed bumps. But I ABI (always back in) because the splitter is 5” about an inch lower than parking blocks and curbs which are usually 6” here.

Shameless photo. I need some fresh pics…

[Race_Doc11]

Just installed the M performance lip almost no difference in clearance. Car is stock hight
.