[Almaretto]

Originally Posted by Barathon

Could you please list the missing steps to get full functionality?

I have proprietary formula for all the changes I make; not sure if anyone is sharing theirs.

• I make multiple changes in BDC, FLM2, and KAFAS.

[yousefnjr]

Originally Posted by Almaretto

I have proprietary formula for all the changes I make; not sure if anyone is sharing theirs.

• I make multiple changes in BDC, FLM2, and KAFAS.

So what’s the process for having you provide this service? Is there a list of available settings you’re able to tweak? What’s the cost and timeline like? Interested

[Almaretto]

Originally Posted by yousefnjr

So what’s the process for having you provide this service? Is there a list of available settings you’re able to tweak? What’s the cost and timeline like? Interested

PM Sent.

[smbimmer]

Almatetto - I sent you a PM regarding coding. Thanks.

[jimmy9980]

So to code anti dazzle on g80 laser lights

This is what is needed
I have BimmerUtility with esys going to try this

Anti-Dazzle Enable (Can confirm that it works):
Bimmercode: In the BCU ECU, in expert mode:

LaMaster1
C_BLC_PRE_ENA: 1
LUT_FLC_FORWARDLIGHTING_Y: AFS

LaMaster2
C_AFS_ECO_LEVEL_3_ENA: 01
C_AFS_ENA: 01

LaMaster3
LUT_AFS_CODRV_HOR: standard/init
LUT_AFS_DRV_HOR: F040_G005_AHL...
C_CLC_CURV_V2: 23
C_CLC_CURV_V3: 28
C_CLC_EXT_ENA: 01
C_HBA_DIM_ENA: 01
C_HBA_GFHBA_ENA_V_HI: 3C
C_HBA_GFHB_ENA: 01

Then in E-SYS:
Read out the KAFAS modules and change:

C_FLA_COUNTRY_WITH_MULTIPLE_REFLECTORS: 01
C_FLA_US_SENSITIVITY_MODE: 00
C_FLA_BS_ENTER_THRESH: Rest of world
C_FLA_BS_EXIT_THRESH: Rest of world
COUNTRY_VARIATION: Europe_RC
C_FLA_CC_MESSAGE_3: no_CC_message
C_FLA_US_SENSITIVITY_MODE: Normal [00]

[Hyura]

If I remove 5AP from the VO and then proceeded to code the following ECUs: BDC_BODY3, both FLM2, KAFAS4

with that be all to enable antidazzle?

[Almaretto]

Originally Posted by Hyura

If I remove 5AP from the VO and then proceeded to code the following ECUs: BDC_BODY3, both FLM2, KAFAS4

with that be all to enable antidazzle?

You still need to FDL code all modules.

[G82DravitWolf]

Originally Posted by Almaretto

I have proprietary formula for all the changes I make; not sure if anyone is sharing theirs.

• I make multiple changes in BDC, FLM2, and KAFAS.

Hey Almaretto are you still providing remote services? I've coded everything possible via Bimmercode but haven't completed the Esys component.

[drninof95]

Thanks for the post. Just recoded using the BimmerCode steps and it works on a F95 comp

[hockeygoalie35]

Almaretto, I've recently re-coded (some version of) Anti-Dazzle, by deleting 5AP from the FA, and then additionally in KAFAS4:
COUNTRY_VARIATION Europe_RC [01]
C_FLA_BS_ENTER_THRESH Rest of world [03]
C_FLA_BS_EXIT_THRESH Rest of world [02]


Is there a way to adjust the "full high beam" threshhold? I've found it rather quick to go full highbeams, for example when a highway bridge blocks a set of oncoming headlights. Any insight you can provide?

[kubax86]

Originally Posted by hockeygoalie35

Almaretto, I've recently re-coded (some version of) Anti-Dazzle, by deleting 5AP from the FA, and then additionally in KAFAS4:
COUNTRY_VARIATION Europe_RC [01]
C_FLA_BS_ENTER_THRESH Rest of world [03]
C_FLA_BS_EXIT_THRESH Rest of world [02]


Is there a way to adjust the "full high beam" threshhold? I've found it rather quick to go full highbeams, for example when a highway bridge blocks a set of oncoming headlights. Any insight you can provide?

You need additional coding in BDC. We can help remotely if needed