[Kief]

Originally Posted by TrentMeister

Painted the nutsack, I think it cleans up the m4's rear end really well

Sac looks good painted…What suspension/spacers again?

[TrentMeister]

Originally Posted by DS_BMW

I'm digging your license plate! I still think it will go above $8.

Me too, I don't plan to sell anymore until 2025

Originally Posted by BIGW0RM

Did you paint it on the car? Hi temp paint?

Yeah the header paint, used the same can for my m2c

I masked everything off really well and pulled of the exhaust tips(hardest part)to make sure I got paint up in between the tips.

Originally Posted by Sedan_Clan

What am I missing here?! The nutsack?!?

Lmao yes that way the muffler hangs down is commonly referred to as the ballsack in the m2c forum.

It just really messed up the way the rear and side profile looked to me.

In the pictures you posted above the muffler is painted as well is it not?

[TrentMeister]

Originally Posted by Kief

Sac looks good painted…What suspension/spacers again?

It's on:
RGsport modded MSS kit with 18f/15r spacers

I could easily run 18 in the back also, just haven't bought a set

[HawaiiG80Green]

Originally Posted by barryc365

Is that the OEM lip or did you get the China knock off? Tempted to get a lip but knowing that it will
Get smashed on the roads around here I don't really want to spend 2 grand on it

OEM M Performance Lip. I did add the Acexxon Front lip protector and its doings its job in getting all the beating. Must have when lowered with the M performance lip

[nearwater4me]

Originally Posted by bri1042

Every time I see said nutsack, the only thought that goes through my head after having an M2C is, "could be worse..."

Nice paint job :-)

Agree. That udder looked much worse on the M2C.

[bimmermann88]

Originally Posted by dwlc1983

Completely understand. I think the side profile actually looks better with the carbon mirror caps (so they are not the only thing carbon from the side) as you can see the side skirt with the front/rear diffuser black bits. Just my opinion. Here’s a little farther out. Crappy photos in cold/wet conditions. Can get better later if you’d like.

How do you like your painted side markers?! I'm on the fence on getting them! I don't have the car yet but I have a room full of mods waiting for the beast to get here!

[moproblems]

No photos but I installed my JB4 and went for a drive in map 2. That tmap sensor is a bitch especially with very large hands.

[mattssi]

Originally Posted by moproblems

No photos but I installed my JB4 and went for a drive in map 2. That tmap sensor is a bitch especially with very large hands.

Impressions?

[moproblems]

Originally Posted by mattssi

Impressions?

The 6MT isn't slow but it really wakes the car up even where it's close to comp levels. Need to do an absolute map6 at 22psi when it's not cold out.

[Color Me Gone]

for the OP,

looking to possible going JB4 myself
Large hands here as well, did you get it from the top or is it easier or even possible from the bottom?

[TrentMeister]

Originally Posted by moproblems

No photos but I installed my JB4 and went for a drive in map 2. That tmap sensor is a bitch especially with very large hands.

How long did it take you and what tools were required if you don't mind me asking

[barryc365]

Originally Posted by TrentMeister

Painted the nutsack, I think it cleans up the m4's rear end really well

Did you actually buy the car with XRP profits? Brilliant!

[moproblems]

Originally Posted by TrentMeister

How long did it take you and what tools were required if you don't mind me asking

20 minutes outside of the tmap connection. About an hour and a half with. I used:

• 10, 13, 15 metric sockets
• I used a small Milwaukee impact gun for the braces but a ratchet works just fine
• 3 inch extension
• Small power drill with 3/8ths drill
• 2 zip ties to hold up aux coolant pump on AC line
• A set of picks from HF, not dental tools but picks
• Variety of long flathead screw drivers for airboxes and tmap, minimum 12 inch for tmap lock

[TrentMeister]

Originally Posted by barryc365

Did you actually buy the car with XRP profits? Brilliant!

It's kind of a lie, I bought it with XLM profits but my big bag is XRP

[TrentMeister]

Originally Posted by moproblems

20 minutes outside of the tmap connection. About an hour and a half with. I used:

• 10, 13, 15 metric sockets
• I used a small Milwaukee impact gun for the braces but a ratchet works just fine
• 3 inch extension
• Small power drill with 3/8ths drill
• 2 zip ties to hold up aux coolant pump on AC line
• A set of picks from HF, not dental tools but picks
• Variety of long flathead screw drivers for airboxes and tmap, minimum 12 inch for tmap lock

Sounds like a decent project, I might just tackle it myself this weekend.

Thanks for the info🤙🏼

[M3C_Thanos]

Vtt strut bars

[BTC Maxi]

Originally Posted by DS_BMW

I'm digging your license plate! I still think it will go above $8.

Seems like the lawsuit will never end 😭

[dimab0]

Finally got the wing and exhaust. Been waiting for a while.

[Soylent]

Originally Posted by Color Me Gone

for the OP,

looking to possible going JB4 myself
Large hands here as well, did you get it from the top or is it easier or even possible from the bottom?

From the top. I have large hands and installed both RaceChip and JB4 on my G82. You can do it!

I used some large zip ties to crank a few things out of the way. Using a long screwdriver or prybar, gently, helps.

[moproblems]

Originally Posted by Soylent

From the top. I have large hands and installed both RaceChip and JB4 on my G82. You can do it!

I used some large zip ties to crank a few things out of the way. Using a long screwdriver or prybar, gently, helps.

And to add I don't think the bottom is possible. But even struggling from the top is faster than taking the bottom brace off.

[TrentMeister]

Had a strange thing happen last night.

I dropped my GF off and hit the m2 button twice as I was leaving her house as I always do.

There's a steep uphill onto a fast street coming from her house and I usually take the opportunity to get up to speed rapidly.

I turned onto the street and gave it the beans and found myself suddenly sideways in the road!

"WOAH WTF!?"

I looked down at my gauges and saw that I had somehow been put into DSC full off, 0 on Mdrive pro… luckily it was late and the road was empty.

Anyone else randomly found themselves in full DSC off?

That hasn't ever happened and I know for certain I did not do it.

[HTTP 410]

It was a mild end to the day so we got a wash in.