[Nyyrule]

John @ BSPK - are you able to do bi-colours like the OEM wheels for the Anika?

[John @ BSPK]

Originally Posted by Nyyrule

John @ BSPK - are you able to do bi-colours like the OEM wheels for the Anika?

Absolutely. I have done bi-color Millies (along with several other non-OEM styles). A bi-color Anika is very doable. The design is already set up to accommodate it.

I can do it a number of different ways actually. Feel free to reach out if you want to run through some of the possibilities.

Thanks!

[Big6Kal]

Originally Posted by JTO24

So today was a good Friday, indeed as my wheels arrived!! So happy with how they turned out. SO CONCAVE! the front 19x10s are in the front and the rear 20x11s are behind them. They feel so light, too.

How much for these in 20x10 an 20x11?

[moonluv810]

Originally Posted by John @ BSPK

Another OEM+ gem in a new finish - painted white gold (meant to evoke Weissgold)

Anika | White Gold (Painted) | 20x10 / 20x11 Flush Fitment | Custom Drill for OEM Cap

https://imgur.com/XLw7cmi

Well… I know what I want from Santa this Christmas!

[JTO24]

Originally Posted by Big6Kal

How much for these in 20x10 an 20x11?

You can go on their site and select all options and get pricing right on the page. That's another thing I like about John is that he is very transparent about pricing and doesn't make you submit a quote just to get pricing.

[John @ BSPK]

Originally Posted by Big6Kal

How much for these in 20x10 an 20x11?

As mentioned above, all pricing is on the website. You can view the Anika wheel here:

BSPK Forged Anika

I will DM you as well with the specifics but it is all publicly visible right on the site. Thanks!

Originally Posted by moonluv810

Well… I know what I want from Santa this Christmas!

I take that as a huge compliment. I'm honored. I'd love to help Santa make that happen whenever the time is right. Thanks!

Originally Posted by JTO24

You can go on their site and select all options and get pricing right on the page. That's another thing I like about John is that he is very transparent about pricing and doesn't make you submit a quote just to get pricing.

Thanks! I had typed something at about 4:30 this morning and I think I passed out before I got around to hitting send. It was a late night inspecting wheels, which honestly is most nights these days but I wouldn't have it any other way

[John @ BSPK]

Something a little different—this is Teresa, featuring a custom center lock-look cap that culminates in a machined ‘nut,’ hollowed out and secured with a retaining clip for an unapologetically motorsport-inspired aesthetic

Teresa | Brushed Double Gunmetal Satin Face with Machined Satin Lip | 19x9.5 / 20x10.5 Flush Fitment | Custom Center Lock-Look Caps |

[John @ BSPK]

Millie | Brushed Celestial Gold Gloss | 20x10 / 20x10.5 | Flush Fitment | Custom Drilled for OEM Caps |

Honestly I could do this one for the next few days over and over (different sets) but I try to mix it up. LOL

[John @ BSPK]

So thus far I've only actually posted G8x fitments but I suppose I should open it up a bit more simply to show more of the colors (since that tends to be beneficial). I got a question in another thread if I had made Anika in a gunmetal-type color so here we go:

Note - this color is meant to be a take on BMW's Ferric Grey. These are for a F30 customer who had Ferric Grey trim and wanted something close - so I mixed this color up for him. I kind of like it and since it needed a name, we're going with Anthracite...

Anika | Anthracite (Gloss) | 18x9 | Flush Fitment | Custom Drilled for OEM Caps |

View post on imgur.com

[GRNMACH]

John @ BSPK any photos of Chiara in Satin Gunmetal?

[John @ BSPK]

Originally Posted by GRNMACH

John @ BSPK any photos of Chiara in Satin Gunmetal?

Brushed or painted? I think I do in brushed but not in painted. I have done painted charlotte in gunmetal (gloss), which is effectively Chiara without the spoke holes.

Let me know which you were thinking. I had to run out a sec and most of the pics are on my computer but I should be back shortly and can send what I have. I can also send other styles in the colors if I don't have them in Chiara specifically.

Thanks!

[GRNMACH]

Originally Posted by John @ BSPK

Brushed or painted? I think I do in brushed but not in painted. I have done painted charlotte in gunmetal (gloss), which is effectively Chiara without the spoke holes.

Let me know which you were thinking. I had to run out a sec and most of the pics are on my computer but I should be back shortly and can send what I have. I can also send other styles in the colors if I don't have them in Chiara specifically.

Thanks!

I was thinking painted but would like to see brushed as well. If you can send over Chiara (or similar) in gunmetal brushed and painted in satin and gloss it'd help me decide. Thanks

[John @ BSPK]

Originally Posted by GRNMACH

I was thinking painted but would like to see brushed as well. If you can send over Chiara (or similar) in gunmetal brushed and painted in satin and gloss it'd help me decide. Thanks

Alright, I am home. Let's do it.

So this is Chiara brushed gunmetal gloss.




This is a Chiara Brushed Gunmetal Satin for a G80 (never got pics of this mounted sadly and I hesitated to even post because I hate these warehouse pics (they skew dark - I don't think this is super accurate in terms of the finish).



Here's a recent Brushed Gunmetal Satin car (not Chiara but I think this shows the finish well)






Here's Charlotte on a G87 in Gunmetal (Gloss)




And finally, this is Gunmetal Satin (again wrong wheel and car)

[GRNMACH]

This really helps. Much appreciated.

[stbm5]

what's the wheel weight for Chiara Due in factory fitment for g80 x drive staggered set up?

[John @ BSPK]

Originally Posted by stbm5

what's the wheel weight for Chiara Due in factory fitment for g80 x drive staggered set up?

Thanks for the question and sorry for the delay.

Two-piece wheels are inherently a bit heavier due to the added hardware and construction, but it’s often a tradeoff worth making. For reference, a 20x11 Chiara-Due weighs around 25 lbs. Most of my two-piece designs still come in lighter—or at worst, within a negligible margin—compared to OEM wheels.

Any forged monoblock option I offer would be lighter than stock.

Feel free to reach out if you want to discuss in more detail. Thanks!

[John @ BSPK]

Something clean and timeless today...

Charlotte | Brushed Aluminum Gloss | 20x10 / 20x11 | Flush Fitment | Custom Drilled for OEM Caps |

View post on imgur.com

[stbm5]

Originally Posted by John @ BSPK

Thanks for the question and sorry for the delay.

Two-piece wheels are inherently a bit heavier due to the added hardware and construction, but it’s often a tradeoff worth making. For reference, a 20x11 Chiara-Due weighs around 25 lbs. Most of my two-piece designs still come in lighter—or at worst, within a negligible margin—compared to OEM wheels.

Any forged monoblock option I offer would be lighter than stock.

Feel free to reach out if you want to discuss in more detail. Thanks!

I am going to order some wheels from you, just haven't decided which ones and I won't need them until October. on the 2 piece wheels is it possible to do satin black face with gloss back barrel? do you have ability to ship with balancing/tpms/tires mounted?

[John @ BSPK]

Originally Posted by stbm5

I am going to order some wheels from you, just haven't decided which ones and I won't need them until October. on the 2 piece wheels is it possible to do satin black face with gloss back barrel? do you have ability to ship with balancing/tpms/tires mounted?

Awesome. Reach out any time if you want to kick ideas around. You have some time for sure though. Two piece can be a little longer so plan on maybe 11-12 weeks for a two piece set delivered.

Absolutely - satin black face and gloss black barrel is very doable. That's pretty standard but there's a lot of customization options possible (I have had a few that show some examples - e.g. the center lock teresa with motorsports nut and retaining clip, annette with brushed faces and polished windows, etc.). If you can think of something, odds are I can make it happen for you.

I don't ship with tires/tpms unfortunately. I investigated that pretty seriously at one point but it adds a lot of complexity and cost. I ultimately concluded that people are generally going to be better off doing tires/tpms/mounting themselves (aside from the convenience element, which I can definitely appreciate).

As always, happy to answer any other questions, etc. Feel free to reach out any time. Thanks!

[Otto Bon Jovi]

Originally Posted by stbm5

I am going to order some wheels from you, just haven't decided which ones and I won't need them until October. on the 2 piece wheels is it possible to do satin black face with gloss back barrel? do you have ability to ship with balancing/tpms/tires mounted?

I don’t think you’ll regret it. I get a lot of compliments on my Josie’s and when I tell them the price they are even more impressed. 👍

[dkmesa]

We need owners posting their mounted photos! So many great sets, so few photos on cars.

[John @ BSPK]

Annette | Brushed Titanium Gloss | 19x10.5 square | BSPK Caps |

View post on imgur.com