[HARDCORE]

CMW33

Hey, Is your car a RWD or AWD? I’m reading many things regarding it definitely needing spacers with the offset but I’m seeing many mixed things too. It seems that someone else didn’t need a spacer?

[CMW33]

Originally Posted by HARDCORE

CMW33

Hey, Is your car a RWD or AWD? I’m reading many things regarding it definitely needing spacers with the offset but I’m seeing many mixed things too. It seems that someone else didn’t need a spacer?

RWD. I definitely needed a 5mm spacer to make the 20”s work up front with the OEM Pirellis. Otherwise, the tire was touching the damper. Possibly could’ve gone with 10mm but wasn’t sure how that was going to look.

[HARDCORE]

CMW33

Got it, thanks. Did you do any spacers on the rear for the offset or does it look good with the small spacers up front? Also, did you trim the front liner on the inside for the tire to fit? And what year is your car? I currently have the pirellis but I’m gonna get PS4S

[CMW33]

Originally Posted by HARDCORE

CMW33

Got it, thanks. Did you do any spacers on the rear for the offset or does it look good with the small spacers up front? Also, did you trim the front liner on the inside for the tire to fit? And what year is your car? I currently have the pirellis but I’m gonna get PS4S

Yea, I did 13 mm (I think) in back. I think it would’ve looked ok without it. I figure if the wheels are already off the car, you might as well do the rear too.

I had to trim the fender liner up front, yes.

I have a 2024.

[HARDCORE]

CMW33

Sweet, thanks for that info. You put 285/30 in the front right? I’m wondering if like a 295/30 would fit if I trimmed the fender liner. Not sure if I would need a bigger spacer tho? What brand spacer did you use? I’m thinking 295/30/20 front, and either 305/30/20 rear or 305/25/20? I hope that rear one will fit. I’ve also seen many mixed things about it.

[itr_jozay]

really wished BMW shipped them out this way

[GoneTracking]

Originally Posted by HARDCORE

GoneTracking

Your set up is 285/30/20 in the front without any spacers and not being lowered? I have a G80 RWD and I’ve seen many things with people needing or using a spacer so I’m curious if it works while being stock

That is correct. I recently installed 5mm spacers and still no issues and fitment is amazing.

[se4sons2013]

Here is my set up on my G80 XDrive. 285/30R20 sqaure (P-Zero fronts and P4S rears). 12mm front and 15mm rear spacers. Lowered on KW springs and at the lowest setting. Rubs up front a little bit even with the fender liner mesh grill mod. Rubs on the back part of the fender liner. Might need to get 10mm spacers up front.

Prior to this I was running the front 19” wheels with P4S tires and 18mm spacers without rubbing issues.