Burger Tuning BMS Billet Tips for BMW G80 M3 & G82 G83 M4 **NEW PRODUCT**

mike@x-ph.com · 02-15-2022, 03:15 PM

Upgrade your G8x Factory M Exhaust Tips to Larger BMS Billet Custom Tips

The BMS angle cut billet 4.5" exhaust tips are the perfect choice for dressing up your factory M exhaust outlets. 27% bigger than stock these unique billet tips are sure to turn heads. Our tips are equipped with set screws so they go on easily and stay in place.

Available in ceramic matte black and polished Silver Billet. The ultimate exhaust finish ceramic coating can withstand extreme temperatures up to 1200 degrees and provides a durable and great looking finish that rivals OEM quality and longevity. Made in the USA.

Not for use with M-Performance exhaust systems or X3m/X4M.

S58 G8x Exhaust Tips Applications

BMW M3
• 2021+ S58 G80 BMW M3
• 2021+ S58 G80 BMW M3 Competition

BMW M4
• 2021+ S58 G82 BMW M4
• 2021+ S58 G82 BMW M4 Competition

Available in 2 styles. Sold in sets of 4.
• Angle Cut Ceramic Matte Black
• Angle Cut Polished Silver Billet

To install remove your factory tips by pounding outward on the lower rear part of the tip with a screwdriver/chisel and either a rubber mallet or a hammer. This is done from under the rear of the car. Small to medium taps will start the factory tip sliding off the actual exhaust pipe. You can spray some lubricant in there to make it easier if needed. Slide the BMS slip-on exhaust tip straight over the factory exhaust pipe and tighten the set screws. We recommend using some blue thread locker. Note the slots on the BMS tips are for visual alignment purposes only. They will not completely engage with the factory dowels on the factory pipes.

SaMaster14 · 02-15-2022, 05:29 PM

These look great! Something to think about when my car arrives. I have the BMS tips on my current F82!

TrentMeister · 02-15-2022, 05:38 PM

I wish they had gloss black

Fugazii · 02-15-2022, 06:03 PM

Quote:

Originally Posted by TrentMeister

I wish they had gloss black

Just respray with a gloss high temp paint and primer.

TrentMeister · 02-15-2022, 06:04 PM

Quote:

Originally Posted by Fugazii

Quote:

Originally Posted by TrentMeister

I wish they had gloss black

Just respray with a gloss high temp paint and primer.

You think it would look clean?

vitipr · 02-15-2022, 09:30 PM

Quote:

Originally Posted by mike@x-ph.com

Upgrade your G8x Factory M Exhaust Tips to Larger BMS Billet Custom Tips

The BMS angle cut billet 4.5" exhaust tips are the perfect choice for dressing up your factory M exhaust outlets. 27% bigger than stock these unique billet tips are sure to turn heads. Our tips are equipped with set screws so they go on easily and stay in place.

Available in ceramic matte black and polished Silver Billet. The ultimate exhaust finish ceramic coating can withstand extreme temperatures up to 1200 degrees and provides a durable and great looking finish that rivals OEM quality and longevity. Made in the USA.

Not for use with M-Performance exhaust systems or X3m/X4M.

S58 G8x Exhaust Tips Applications

BMW M3
• 2021+ S58 G80 BMW M3
• 2021+ S58 G80 BMW M3 Competition

BMW M4
• 2021+ S58 G82 BMW M4
• 2021+ S58 G82 BMW M4 Competition

Available in 2 styles. Sold in sets of 4.
• Angle Cut Ceramic Matte Black
• Angle Cut Polished Silver Billet

To install remove your factory tips by pounding outward on the lower rear part of the tip with a screwdriver/chisel and either a rubber mallet or a hammer. This is done from under the rear of the car. Small to medium taps will start the factory tip sliding off the actual exhaust pipe. You can spray some lubricant in there to make it easier if needed. Slide the BMS slip-on exhaust tip straight over the factory exhaust pipe and tighten the set screws. We recommend using some blue thread locker. Note the slots on the BMS tips are for visual alignment purposes only. They will not completely engage with the factory dowels on the factory pipes.

Mike, can they be adjusted more flushed? Or that the max they will on "in"? Thanks

LongBeachDinanFan · 02-15-2022, 09:40 PM

Have a more close up photo? I can't really tell how they look.

MannyS · 02-15-2022, 10:09 PM

Good to see some new G8x products entering the marketplace,

Soylent · 02-15-2022, 10:11 PM

Is the inside diameter the same as the OEM tips?

iviegatron · 02-16-2022, 07:00 AM

Quote:

Originally Posted by TrentMeister

You think it would look clean?

If you're using a spray paint then it should come out clean. Just make sure you prep your surface for a smooth finish. Remember to use a clear coat to protect your finish. That's how I fixed my curb rashed wheels.

Quote:

Originally Posted by Soylent

Is the inside diameter the same as the OEM tips?

Seems that way. Looks like they only made the walls thicker, increasing the outer diameter.

mike@x-ph.com · 02-16-2022, 09:40 AM

Quote:

Originally Posted by vitipr

Mike, can they be adjusted more flushed? Or that the max they will on "in"? Thanks

It has just been released so i have not had time to test it but i don't think it can be adjusted

vitipr · 02-16-2022, 10:26 AM

Quote:

Originally Posted by mike@x-ph.com

Quote:

Originally Posted by vitipr

Mike, can they be adjusted more flushed? Or that the max they will on "in"? Thanks

It has just been released so i have not had time to test it but i don't think it can be adjusted

Ok. Hopefully someone installs one soon, if not Ill order one soon and test it. Thanks!

mike@x-ph.com · 02-16-2022, 05:41 PM

Quote:

Originally Posted by vitipr

Ok. Hopefully someone installs one soon, if not Ill order one soon and test it. Thanks!

I would test it but I have an aftermarket exhaust

Fugazii · 02-16-2022, 09:36 PM

Quote:

Originally Posted by TrentMeister

You think it would look clean?

I had a autobody shop paint my AA tip's on my last car they used high temp paint came out perfect.

mike@x-ph.com · 02-17-2022, 08:58 AM

Quote:

Originally Posted by Fugazii

I had a autobody shop paint my AA tip's on my last car they used high temp paint came out perfect.

playswcars · 12-13-2022, 07:01 AM

Has anyone bought these? If so, I'd appreciate more pictures

mike@x-ph.com · 12-13-2022, 08:48 AM

Quote:

Originally Posted by playswcars

Has anyone bought these? If so, I'd appreciate more pictures

We sold a few but most of our customers upgrade their exhaust not just the tips

LBBDrew · 12-13-2022, 12:17 PM

I bought a set from X-PH and they just arrived. Will install them after the break-in service and can post some photos. They look/feel great in hand. Very solid

mike@x-ph.com · 12-13-2022, 01:54 PM

Quote:

Originally Posted by LBBDrew

I bought a set from X-PH and they just arrived. Will install them after the break-in service and can post some photos. They look/feel great in hand. Very solid

DBV · 12-14-2022, 08:00 AM

Not a fan of these. Too chunky/thick looking IMHO. Reminds me of the stovepipe on my buddy's Traeger smoker grill. I'm sure quality is great, as BMS always delivers, but from an aesthetic perspective, it could have been done better.

Hypothecator · 12-24-2023, 09:33 AM

I know this is an older thread, but I am just now thinking about these as I opted to only replace my midpipe and not the stock rear exhaust. Are these easy to install for a not super handy person?!!

mike@x-ph.com · 12-27-2023, 12:12 PM

Quote:

Originally Posted by Hypothecator

I know this is an older thread, but I am just now thinking about these as I opted to only replace my midpipe and not the stock rear exhaust. Are these easy to install for a not super handy person?!!

Its an easy install for the average person

02-15-2022, 03:15 PM	#1
mike@x-ph.com BimmerPost Supporting Vendor 24477 Rep 191,448 Posts Drives: 07-335/12-328/18-M4/21-M4CP Join Date: Sep 2013 Location: Las Vegas iTrader: (23)	Burger Tuning BMS Billet Tips for BMW G80 M3 & G82 G83 M4 NEW PRODUCT Upgrade your G8x Factory M Exhaust Tips to Larger BMS Billet Custom Tips The BMS angle cut billet 4.5" exhaust tips are the perfect choice for dressing up your factory M exhaust outlets. 27% bigger than stock these unique billet tips are sure to turn heads. Our tips are equipped with set screws so they go on easily and stay in place. Available in ceramic matte black and polished Silver Billet. The ultimate exhaust finish ceramic coating can withstand extreme temperatures up to 1200 degrees and provides a durable and great looking finish that rivals OEM quality and longevity. Made in the USA. Not for use with M-Performance exhaust systems or X3m/X4M. S58 G8x Exhaust Tips Applications BMW M3 • 2021+ S58 G80 BMW M3 • 2021+ S58 G80 BMW M3 Competition BMW M4 • 2021+ S58 G82 BMW M4 • 2021+ S58 G82 BMW M4 Competition Available in 2 styles. Sold in sets of 4. • Angle Cut Ceramic Matte Black • Angle Cut Polished Silver Billet To install remove your factory tips by pounding outward on the lower rear part of the tip with a screwdriver/chisel and either a rubber mallet or a hammer. This is done from under the rear of the car. Small to medium taps will start the factory tip sliding off the actual exhaust pipe. You can spray some lubricant in there to make it easier if needed. Slide the BMS slip-on exhaust tip straight over the factory exhaust pipe and tighten the set screws. We recommend using some blue thread locker. Note the slots on the BMS tips are for visual alignment purposes only. They will not completely engage with the factory dowels on the factory pipes. __________________ Check out our current sale by clicking on this link! https://x-ph.com/sale/ Phone number 702-494-9435
	Appreciate 2 SaMaster144499.00 vitipr171.00 Tweet Quote

02-15-2022, 05:29 PM	#2
SaMaster14 Brigadier General 4499 Rep 3,876 Posts Drives: '23 G80 M3C xDrive; '13 e92 M3 Join Date: Mar 2012 Location: Southern California iTrader: (0) Garage List 2013 BMW M3 [8.50] 2023 BMW M3 Competi ... [10.00]	These look great! Something to think about when my car arrives. I have the BMS tips on my current F82! __________________ 2023 G80 M3 Competition xDrive Isle of Man Green on Kyalami Orange full leather - 826M black wheels - Carbon Fiber Trim - Carbon Bucket Seats - Executive/Driving Assist/Parking Packages - Laserlight - M Shadowline Lights - M Drive Pro - CS Trans/Diff/Steering Coding 2013 E92 M3 Mineral White on Bamboo Beige noviello leather (Base w/ Nav, Comfort Access, Lighting Pack) - DINAN Stage 1 and Free Flow Axle-Back Exhaust
	Appreciate 0 Quote

02-15-2022, 05:38 PM	#3
TrentMeister Colonel 2953 Rep 2,068 Posts Drives: g82 comp Join Date: Jun 2019 Location: Dana Point iTrader: (0)	I wish they had gloss black
	Appreciate 2 MannyS363.00 ny2nj192.50 Quote

02-15-2022, 09:40 PM	#7
LongBeachDinanFan Lieutenant 286 Rep 509 Posts Drives: M3 Join Date: Jan 2015 Location: LB, CA iTrader: (0)	Have a more close up photo? I can't really tell how they look.
	Appreciate 0 Quote

02-15-2022, 10:09 PM	#8
MannyS Lieutenant 363 Rep 412 Posts Drives: Spouse’s M4CX convertible Join Date: Oct 2011 Location: Republic of Texas iTrader: (1)	Good to see some new G8x products entering the marketplace,
	Appreciate 0 Quote

02-15-2022, 10:11 PM	#9
Soylent Major 998 Rep 1,100 Posts Drives: 2021 M4C Join Date: Jul 2009 Location: California iTrader: (0)	Is the inside diameter the same as the OEM tips?
	Appreciate 0 Quote

12-13-2022, 07:01 AM	#16
playswcars ///M-Thusiast 3688 Rep 955 Posts Drives: '23 X5 M50i Join Date: Nov 2021 Location: Zurich iTrader: (0) Garage List 2023 BMW M3 Competi ... [0.00]	Has anyone bought these? If so, I'd appreciate more pictures __________________ Current: 2023 G05 X5 M50i xDrive Soon: 2024 G87 M2 Past: G80 M3x, G80 M3, G05 X5, F82 M4, F87 M2C, F20 M140i
	Appreciate 0 Quote

12-13-2022, 12:17 PM	#18
LBBDrew Lieutenant 336 Rep 522 Posts Drives: 2017 LBB M2 Join Date: Feb 2016 Location: San Francisco iTrader: (0)	I bought a set from X-PH and they just arrived. Will install them after the break-in service and can post some photos. They look/feel great in hand. Very solid
	Appreciate 1 playswcars3687.50 Quote

12-14-2022, 08:00 AM	#20
DBV Captain 788 Rep 962 Posts Drives: G87 M2, G20 330d, Brabus Smart Join Date: Mar 2013 Location: Berlin iTrader: (0) Garage List 2023 BMW M2 [9.17] 2018 Brabus Smart [10.00] 2021 BMW 330d [10.00]	Not a fan of these. Too chunky/thick looking IMHO. Reminds me of the stovepipe on my buddy's Traeger smoker grill. I'm sure quality is great, as BMS always delivers, but from an aesthetic perspective, it could have been done better. __________________ @DBV_ Current: '23 G87 M2 6MT / '21 G20 330d / '18 Brabus Smart Gone: '21 G05 X5 M50d / '18 MB C63s (632hp) / '16 F80 M3 6MT (570hp) / '09 F01 750i / '16 Abarth 595 Competizione (202hp)
	Appreciate 1 vitipr171.00 Quote

12-24-2023, 09:33 AM	#21
Hypothecator Enlisted Member 81 Rep 30 Posts Drives: 2024 M4 Comp Convertible Join Date: Aug 2023 Location: Philadelphia iTrader: (0) Garage List 2024 BMW M4 Comp Co ... [6.67] [10.00]	I know this is an older thread, but I am just now thinking about these as I opted to only replace my midpipe and not the stock rear exhaust. Are these easy to install for a not super handy person?!!
	Appreciate 0 Quote