[DrRay81]

Lowered on Öhlins Road and Track BMS MW10S1. Vorshlag Camber Plates and Öhlins edc cancellation kit. For those that are looking for a really low or even lowish stance the Öhlins may not be for you. This is with the front set as low as it can go in the front without the adjuster knob hitting the cv boot. The rear however can go as low as you want. I spoke with Öhlins and all the part no’s are correct and that their kits are always designed with performance as the primary focus and not a stanced out ride. Bmw has a really high fender arch in the front compared to the rear and visually looks odd if you stare at it long enough. My main reason was for the performance aspect but admittedly I was looking for some level of “stance”. Would’ve loved to go maybe 10mm lower all around however I am expecting a big improvement even over the stock CS suspension. Picking it up tomorrow and have an alignment scheduled in a week or so

[DrRay81]

After getting in touch with ohlins vorshlag and hp we’ve verified part nos and got everything sorted. Parts were correct and the issue or I should say nonissue was that we knew the stack height on the vorshlag plates were the same as OEM but we didn’t know that they sat 0.5” higher on the strut shaft than OEM. So we adjusted or actually took out all the preload and are running negative preload and according to ohlins and vorshlag that is not an issue. But got the height adjusted and have an alignment. On Tuesday. But here it is sitting perfect IMO

[myg80m3]

Originally Posted by DrRay81

After getting in touch with ohlins vorshlag and hp we’ve verified part nos and got everything sorted. Parts were correct and the issue or I should say nonissue was that we knew the stack height on the vorshlag plates were the same as OEM but we didn’t know that they sat 0.5” higher on the strut shaft than OEM. So we adjusted or actually took out all the preload and are running negative preload and according to ohlins and vorshlag that is not an issue. But got the height adjusted and have an alignment. On Tuesday. But here it is sitting perfect IMOAttachment 3320702

Attachment 3320703

Attachment 3320704

Looks much better now

[Houlester]

[QUOTE=DrRay81;30648177]After getting in touch with ohlins vorshlag and hp we’ve verified part nos and got everything sorted. Parts were correct and the issue or I should say nonissue was that we knew the stack height on the vorshlag plates were the same as OEM but we didn’t know that they sat 0.5” higher on the strut shaft than OEM. So we adjusted or actually took out all the preload and are running negative preload and according to ohlins and vorshlag that is not an issue. But got the height adjusted and have an alignment. On Tuesday. But here it is sitting perfect

Those wheels are perfect with the white. I’ve been looking at everything from gunmetal, bronze, gold, to black and keep coming back to these. I’m assuming clear brushed with a polished lip?

[FloridaM5]

Gorgeous car. 🤙

[DrRay81]

[QUOTE=Houlester;30661737]

Originally Posted by DrRay81

After getting in touch with ohlins vorshlag and hp we’ve verified part nos and got everything sorted. Parts were correct and the issue or I should say nonissue was that we knew the stack height on the vorshlag plates were the same as OEM but we didn’t know that they sat 0.5” higher on the strut shaft than OEM. So we adjusted or actually took out all the preload and are running negative preload and according to ohlins and vorshlag that is not an issue. But got the height adjusted and have an alignment. On Tuesday. But here it is sitting perfect

Those wheels are perfect with the white. I’ve been looking at everything from gunmetal, bronze, gold, to black and keep coming back to these. I’m assuming clear brushed with a polished lip?

Yes they're custom 3 piece. High polish lips and hand brushed clear centers. These are from Ron over at AR Motorwerkz. He is the owner and before I ordered and throughout the build process called and texted me every step of the way. Explained the difference between bbs motorsport and bbs dot barrels to how they’re assembled and the colors available. I can’t say enough good about AR_Motorwerkz. if you're in the market for some custom wheels hit him up.

[AR_Motorwerkz]

[QUOTE=DrRay81;30663275]

Originally Posted by Houlester

Yes. Custom 3 piece. High polish lips and hand brushed clear centers. These are from Ron over at AR Motorwerkz. He is the owner and called and texted me every step of the way. Explained the difference between bbs motorsport and bbs dot barrels to how they’re assembled and the colors available. I can’t say enough good about AR_Motorwerkz

Thanks man DrRay81

[DrRay81]

the M3CS got a little brother. picked up a 2024 GR Corolla Premium last Wednesday. 1.6L 3 cylinder turbo, 6 speed manual, and with adjustable center diff, front and rear lsd's. it's a blast. The yellow drl’s on the GR are from Motorsport+ and were just released. some te37's are on the way.