BMW M3 and M4 - The Icons
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
home
Technical Sections Engine / Drivetrain / Exhaust / Bolt-ons / Tuning

Post Reply
 
Thread Tools Search this Thread
      03-15-2023, 09:09 AM   #1
Dinan_Engineering
BimmerPost Supporting Vendor
Dinan_Engineering's Avatar
United_States
3896
Rep
3,124
Posts


Drives: Any BMW
Join Date: Jun 2013
Location: Opelika, AL

iTrader: (0)

NEW RELEASE: Dinan G8x M3/M4 Axle Back Exhausts & Middle Exhaust / X-Pipe

BIMMERPOST
     Featured on BIMMERPOST.com
Name:  G8x_M3M4_Exhaust_X-Pipe_Banner_Forum_1.jpg
Views: 3598
Size:  309.4 KB

Dinan G8x M3/M4 Axle Back Exhausts & Middle Exhaust / X-Pipe

Part Number: D660-0093, D660-0093-BLK & D660-0094

Applications:
  • 2021-2023 G80 M3 (& xDrive)
  • 2021-2023 G82/G83 M4 (& xDrive)

Product Page(s) / Pricing:
Axle Back Exhausts: dinan.info/G8X-FFE
Middle Exhaust / X-Pipe: dinan.info/G8X-X

Release Date: Available Now!

Description (G8x Axle Back Exhausts): The G8x M3/M4 is arguably superior in every category to its predecessor but in most, if not all, circles the biggest downfall of the platform is in the sound department. Like the F8x before it with the S55, the S58 in the current generation leaves a lot to be desired. While a step in the right direction from its forerunner the stock vocals still carry far too much rasp that do not fully articulate the refined aggressiveness typical of the brands signature performance models. Dinan corrects this weakness with a valved axle back exhaust system that elevates the tone to a deeper, more meaningful note while also delivering an extra level of amplification above and beyond its stock counterpart. Coupled with the optional middle exhaust / x-pipe for the platform an even louder, smoother, and fuller soundtrack is possible.

Through extensive development and testing nearly every possible permutation of the exhaust was attempted. Unlike the previous generation where cabin sound/drone was largely unchanged between the sedan and the coupe, that was not the case with the G8x chassis’. This caused countless iterations to be attempted in the quest for a common system that not only sounded superb externally but one that also didn’t introduce an overbearing internal cabin drone on either body type. The result is a system we are confident will be coveted by all for years to come. To achieve desired sound volume and tone worthy of the G8x M3/M4 the tubing was enlarged to 76mm (vs 70mm stock) to allow freer flow, and reduce backpressure, throughout the entirety of the system. The larger piping gives way to multiple pathways as it nears the rear of the vehicle -- the choice of which is utilized determined by the factory exhaust valves which are retained. When valves are closed, flow is directed into the Dinan muffler, where absorption and reactive technologies are used, and exit out the two inner tips. This limits noise during low-speed driving and produces a more subdued, albeit deeper, and agreeable note. However, when the valves are open during high-load conditions the bulk of the gases bypass the muffler altogether for a near straight pipe design and maximum aural enjoyment to be achieved. It’s the perfect marriage for all tastes and allows civility or impassioned aggression depending on what the situation demands. The combination is one Dinan has deemed fitting for the marques signature performance models that cater to the tasteful enthusiast who demand the best for all situations.

Visually, the Dinan G8x M3/M4 exhaust has been skillfully crafted entirely out of T304 stainless steel and TIG welded for the best visual appearance and color. The entire system is then brush finished to further guarantee an immaculate looking system out of the box. The attention to detail is not limited to parts of the system you can't see once the exhaust is installed but is also extended to the exhaust tips themselves. The Dinan exhaust includes massive, quad 4.5-inch (114mm) clamp-on, double-walled, polished stainless steel (or coated black ceramic) and laser engraved exhaust tips. Despite the seemingly cartoonish size on paper, the tips mesh seamlessly and fill the factory cut-outs to complete the OEM+ look with a healthy dose of audible attitude.

Features/Benefits (G8x Axle Back Exhausts):
  • Maximum gains of +6 HP and +5 lb-ft of torque
  • Enjoyably louder, sportier sound
  • Drone abatement technologies used to reduce cabin resonance
  • Four, diffuser filling, 4.5-inch (114mm) double-walled, polished stainless steel (or coated black ceramic) clamp-on tips with laser engraved Dinan logo
  • Larger diameter piping for increased flow (76mm vs. 70mm)
  • 6-pounds lighter than the stock axle back (Stock: 44-pounds vs. Dinan: 38-pounds)
  • Stock exhaust valve actuators reused, and operation of exhaust valve is unchanged so exhaust tone can be adjusted via the M-drive settings
  • Computer controlled exhaust valves are retained and limit noise during low-speed driving and open fully during high-load conditions
  • 100% 304 Stainless Steel construction
  • Factory-like fitment with included mounting hardware



Name:  G8x_M3M4_Exhaust_Banner_Forum_2.jpg
Views: 3619
Size:  195.9 KB
Name:  G8x_M3M4_Exhaust_Banner_Forum_3.jpg
Views: 3214
Size:  103.5 KB
Name:  G8x_M3M4_Exhaust_Banner_Forum_4.jpg
Views: 3239
Size:  215.6 KB
Name:  G8x_M3M4_Exhaust_Banner_Forum_5.jpg
Views: 3222
Size:  92.2 KB
Name:  G8x_M3M4_Exhaust_Banner_Forum_6.jpg
Views: 3201
Size:  119.3 KB
Name:  G8x_M3M4_Exhaust_Banner_Forum_7.jpg
Views: 3208
Size:  137.0 KB
Name:  G8x_M3M4_Exhaust_Banner_Forum_8.jpg
Views: 3234
Size:  453.3 KB
Name:  G8x_M3M4_Exhaust_Banner_Forum_9.jpg
Views: 3234
Size:  381.6 KB
Name:  G8x_M3M4_Exhaust_Banner_Forum_10.jpg
Views: 3256
Size:  402.5 KB

Description (G8x Middle Exhaust / X-Pipe): Looking to elevate the external acoustics of your G8x but want to upgrade in stages and/or not break the bank?

The Dinan Middle Exhaust for the G80 M3 is and G82/G83 M4 introduces a more aggressive tone and an increase in volume over the stock system while retaining the factory muffler at a budget friendly price point. Should the desire for more arise however, it can easily be paired with the matching Dinan axle back exhaust for further aural enhancement and a more aggressive growl. It is a union that boasts a bold, yet sophisticated, exhaust note that neither can fully achieve on their own.

This middle exhaust itself removes the hydro-formed factory center section from the secondary catalysts back to the axle back, including both resonators, and replaces it with larger 3-inch T304 stainless steel tubing for freer flowing capabilities. In place of the forward factory resonator, Dinan incorporates a beautifully crafted X-pipe made from mandrel-bent tubing for minimum restriction, unlike stamped X-pipes which are commonplace in the market. This hand-made 'X' is not only the focal point of the system in terms of aesthetics but also the star when it comes to the effects on the sound. Promoting even flow to both banks of tips, the 'X' removes unwanted nuances in sound caused by uneven exhaust flow that is present in the stock system. Along with the inherent benefit of increased volume by removal of the resonators, the Dinan X-Pipe for the G8x M3/M4 produces a louder, smoother, and fuller exhaust note that will deliver smiles time and time again.

Features/Benefits (G8x Middle Exhaust / X-Pipe):
  • Smoother, louder and sportier sound
  • 76mm (3-inch) tubing replaces stock 70mm (2.75-inch) tubing for free flow
  • Deletes resonators between the secondary catalysts and rear muffler for increased volume
  • Includes X-pipe crossover made from mandrel bent tubing for minimum restriction
  • 5-pounds lighter than the stock mid-section (Stock: 22-pounds vs. Dinan: 17-pounds)
  • 100% 304 stainless steel construction
  • Factory-like fitment with included mounting hardware

Name:  G8x_M3M4_X-Pipe_Banner_Forum_2.jpg
Views: 3182
Size:  116.2 KB
Name:  G8x_M3M4_X-Pipe_Banner_Forum_3.jpg
Views: 3191
Size:  99.1 KB
Name:  G8x_M3M4_X-Pipe_Banner_Forum_4.jpg
Views: 3175
Size:  238.0 KB
Name:  G8x_M3M4_X-Pipe_Banner_Forum_5.jpg
Views: 3219
Size:  387.2 KB

Last edited by Dinan_Engineering; 04-26-2023 at 09:37 AM..
Appreciate 13
Jset7111.50
M3Diaz245.00
FrankieNuo1210.00
FISH225379.00
T0RM3NT3553.50
Nate.G82521.00
werdn656.00
Limegrntaln13021.50
M4Tejas728.00
mathys196.50
E92M3GT101.00
      03-15-2023, 09:40 AM   #2
mattssi
Major
869
Rep
1,360
Posts

Drives: 2019 X3
Join Date: Sep 2006
Location: Bend, OR

iTrader: (1)

Haven't heard in person obviously...

But I think it sounds great! Def oem+.
Looks good
Priced good


Legit!!!
Appreciate 0
      03-15-2023, 09:53 AM   #3
Jset7
New Member
Jset7's Avatar
United_States
112
Rep
27
Posts

Drives: BMW M3
Join Date: Feb 2023
Location: Dallas, TX

iTrader: (0)

Garage List
BMW M  [0.00]
Very nice sounding. Can the factory exhaust tips be used in place of the Dinan provided ones?
Appreciate 4
      03-15-2023, 10:31 AM   #4
hamzag20
First Lieutenant
hamzag20's Avatar
556
Rep
328
Posts

Drives: BMW G20 330i, BMW G30 540i
Join Date: Aug 2019
Location: Missouri

iTrader: (0)

Definitely looks good, curious about whether the axleback will fit onto my Valvetronic Single Mid.
Appreciate 0
      03-15-2023, 10:40 AM   #5
Dinan_Engineering
BimmerPost Supporting Vendor
Dinan_Engineering's Avatar
United_States
3896
Rep
3,124
Posts


Drives: Any BMW
Join Date: Jun 2013
Location: Opelika, AL

iTrader: (0)

Quote:
Originally Posted by Jset7 View Post
Very nice sounding. Can the factory exhaust tips be used in place of the Dinan provided ones?
Would not, besides the different mounting methods (slip-on vs. clamp-on) the stock tips go onto a stock 3.18" pipe whereas the Dinan tips go onto a 3" pipe so a stock tip would be pretty loose on the Dinan exhaust even if you did figure a way to secure it.

Quote:
Originally Posted by hamzag20 View Post
Definitely looks good, curious about whether the axleback will fit onto my Valvetronic Single Mid.
Couldn't say definitively as its never been tested but assuming the valvetronic single mid uses the same factory cut points than there is little reason why it shouldn't mate.
Appreciate 2
      03-15-2023, 10:51 AM   #6
mike@x-ph.com
BimmerPost Supporting Vendor
mike@x-ph.com's Avatar
United_States
23792
Rep
190,150
Posts


Drives: 07-335/12-328/18-M4/21-M4CP
Join Date: Sep 2013
Location: Las Vegas

iTrader: (23)

__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/

Phone number 702-494-9435
Appreciate 0
      03-15-2023, 11:07 AM   #7
Bimmer100_
Captain
Bimmer100_'s Avatar
United_States
372
Rep
816
Posts

Drives: 23 G80 M3 6SPD
Join Date: May 2011
Location: Long Island

iTrader: (12)

Garage List
Any videos with just the midpipe?
__________________
Acura RSX-S K24a2 JRSC Swap - SOLD
CPO BMW 335i 6MT - SOLD
Appreciate 1
JTO245246.50
      03-15-2023, 11:18 AM   #8
akbjr
Private First Class
57
Rep
138
Posts

Drives: BMW
Join Date: Sep 2021
Location: Chicago, IL

iTrader: (0)

is cutting of the stock exhaust required for either the midpipe or the axle back if used individually or together?
Appreciate 0
      03-15-2023, 11:57 AM   #9
Valvetronic Designs
BimmerPost Supporting Vendor
Valvetronic Designs's Avatar
United_States
504
Rep
311
Posts


Drives: G80 M3
Join Date: Oct 2022
Location: Quakertown Pennsylvania

iTrader: (0)

Quote:
Originally Posted by Dinan_Engineering View Post
Would not, besides the different mounting methods (slip-on vs. clamp-on) the stock tips go onto a stock 3.18" pipe whereas the Dinan tips go onto a 3" pipe so a stock tip would be pretty loose on the Dinan exhaust even if you did figure a way to secure it.



Couldn't say definitively as its never been tested but assuming the valvetronic single mid uses the same factory cut points than there is little reason why it shouldn't mate.
Nice work guys! we do use the factory cut points so you will be in good shape. Excited to see videos of this setup
Appreciate 1
hamzag20556.00
      03-15-2023, 12:13 PM   #10
Dinan_Engineering
BimmerPost Supporting Vendor
Dinan_Engineering's Avatar
United_States
3896
Rep
3,124
Posts


Drives: Any BMW
Join Date: Jun 2013
Location: Opelika, AL

iTrader: (0)

Quote:
Originally Posted by Bimmer100_ View Post
Any videos with just the midpipe?
Unfortunately not at present. Our stock system had an "accident" and requires some work. Rather than wait for it to be repaired/replaced we just did the complete system video so it could get released. Didn't want to postpone release any longer. Request is in however so individual clips will be forthcoming of both the individual components in the coming weeks.

Quote:
Originally Posted by akbjr View Post
is cutting of the stock exhaust required for either the midpipe or the axle back if used individually or together?
Cutting would be required regardless of if done individually or together. The stock exhaust is a single piece all the way up to the primary cats. We retain the secondary cats for emissions compliance/legality so would require cutting just aft of them. Instructions on the product page go into pretty specific detail on cutting and general installation should you want to get a better idea of what it entails.

Quote:
Originally Posted by Valvetronic Designs View Post
Nice work guys! we do use the factory cut points so you will be in good shape. Excited to see videos of this setup
Awesome. Good to get confirmation!
Appreciate 0
      03-15-2023, 01:39 PM   #11
Vinnrox250
Captain
Vinnrox250's Avatar
United_States
2835
Rep
673
Posts

Drives: 23 M3Cx
Join Date: Jul 2020
Location: Fort Worth

iTrader: (0)

Garage List
Very curious to see more videos as this comes out. I was sure I was going with something else, then this dropped.
__________________
G80x/Dravit/Carbon Roof/Carbon Exterior/ Bi-Color 826/Shadowline Lasers/Full Silverstone/Vented Seats/Exec. Pack/DAP/PAP/M Drive Pro
Appreciate 2
      03-15-2023, 02:57 PM   #12
evoi19
Lieutenant General
evoi19's Avatar
No_Country
1500
Rep
17,360
Posts

Drives: 2022 G80C
Join Date: Dec 2006
Location: Bay Area

iTrader: (18)

I like! Question, I’m looking at the axle back only since I have a full system already but would like to change only part of the system. If I’m local to the bay, do you offer install?
Thanks!
Appreciate 0
      03-15-2023, 03:00 PM   #13
Dinan_Engineering
BimmerPost Supporting Vendor
Dinan_Engineering's Avatar
United_States
3896
Rep
3,124
Posts


Drives: Any BMW
Join Date: Jun 2013
Location: Opelika, AL

iTrader: (0)

Quote:
Originally Posted by evoi19 View Post
I like! Question, I’m looking at the axle back only since I have a full system already but would like to change only part of the system. If I’m local to the bay, do you offer install?
Thanks!
We moved out of the bay area in early 2018. Currently in Auburn, AL. That said, we don't offer customer hardware installs anyway -- strictly an R&D center. In the bay are though there are a number of good Dinan dealers though -- Performance Technic and Bavarium Autoworks are the 2 that come to the top of my head but there are quite a few others I am sure I am spacing on.
Appreciate 1
      03-15-2023, 03:25 PM   #14
evoi19
Lieutenant General
evoi19's Avatar
No_Country
1500
Rep
17,360
Posts

Drives: 2022 G80C
Join Date: Dec 2006
Location: Bay Area

iTrader: (18)

Quote:
Originally Posted by Dinan_Engineering View Post
We moved out of the bay area in early 2018. Currently in Auburn, AL. That said, we don't offer customer hardware installs anyway — strictly an R&D center. In the bay are though there are a number of good Dinan dealers though — Performance Technic and Bavarium Autoworks are the 2 that come to the top of my head but there are quite a few others I am sure I am spacing on.
Haha ok that just shows how old I am! Thanks for the recs, I either go to PT or SE in San Jose. Looking fwd to order this quite soon!
Appreciate 1
      03-15-2023, 05:28 PM   #15
evoi19
Lieutenant General
evoi19's Avatar
No_Country
1500
Rep
17,360
Posts

Drives: 2022 G80C
Join Date: Dec 2006
Location: Bay Area

iTrader: (18)

Ordered the axle back! Will post pics when it arrives.
Appreciate 2
      03-15-2023, 05:34 PM   #16
dj_intrinsic
Second Lieutenant
dj_intrinsic's Avatar
United_States
321
Rep
233
Posts

Drives: 23 G80 M3 6MT
Join Date: Oct 2013
Location: Bay Area, CA

iTrader: (1)

Quote:
Originally Posted by evoi19 View Post
Haha ok that just shows how old I am! Thanks for the recs, I either go to PT or SE in San Jose. Looking fwd to order this quite soon!
Check out CarBahn in San Jose, Steve Dinan's new shop that specializes in more euros than just BMW.
__________________
2023 G80 MT / AW / Fjord Blue/Black | KW HAS | Apex VS5RS F:20x10+8 285/30-20 R:20x11+18 305/30-20 | Maxton Street Pro Splitter | OEM M3CS Grille | SST Valve Controller | CS Style Yellow DRL | MAD Non-Res Single Midpipe
Past: 2018 X3 M40i | 2016 M-Sport X1 | 2013 MT M-Sport 328i | 2021 Audi A6 Allroad
Appreciate 1
      03-15-2023, 06:00 PM   #17
jpsimon
Team Zissou
jpsimon's Avatar
United_States
3058
Rep
10,197
Posts

Drives: 2022 AWD M3 Comp - SMB
Join Date: Dec 2006
Location: CT

iTrader: (7)

Awesome! Any news on release date for the Carbon strut brace / engine cover?
Appreciate 0
      03-15-2023, 06:14 PM   #18
tom @ eas
BimmerPost Supporting Vendor
tom @ eas's Avatar
United_States
8067
Rep
18,788
Posts


Drives: BMW
Join Date: Nov 2005
Location: Anaheim, CA

iTrader: (19)

Garage List
2018 BMW i3s  [0.00]
2010 BMW M3  [6.50]
2015 BMW M4  [5.25]
Just got these up on the site, looking forward to installing soon.
__________________
Tom G. | european auto source (eas)
email: tom@europeanautosource.com · web: https://europeanautosource.com· tel 866.669.0705 · ca: 714.369.8524 x22

GET DAILY UPDATES ON OUR BLOG · FACEBOOK · YOUTUBE · FLICKR · INSTAGRAM
Appreciate 1
      03-15-2023, 06:17 PM   #19
Dinan_Engineering
BimmerPost Supporting Vendor
Dinan_Engineering's Avatar
United_States
3896
Rep
3,124
Posts


Drives: Any BMW
Join Date: Jun 2013
Location: Opelika, AL

iTrader: (0)

Quote:
Originally Posted by evoi19 View Post
Haha ok that just shows how old I am! Thanks for the recs, I either go to PT or SE in San Jose. Looking fwd to order this quite soon!
Quote:
Originally Posted by dj_intrinsic View Post
Check out CarBahn in San Jose, Steve Dinan's new shop that specializes in more euros than just BMW.
See. Told you I was forgetting some. Carbahn too. Bavarian Autoworks (now owned by some old Dinan employees as well) was the old MV Dinan location if that has any bearing like Carbahn. Roots everywhere so to speak.
Appreciate 2
evoi191499.50
      03-15-2023, 08:21 PM   #20
skim
Captain
United_States
142
Rep
660
Posts

Drives: 07 Z4MC
Join Date: Nov 2007
Location: SoCal

iTrader: (0)

Sorry not to hijack the thread, since this requires cutting of OEM system and I'm in CA, is there exhaust system difference between G80 and G82 and whether comp vs base? I'm wondering if I should keep an unbutchered one just in case..
__________________
Future mod consideration: exhaust, pulley
otherwise, very happy with how the m3 was born
Appreciate 0
      03-15-2023, 09:48 PM   #21
BMWnation
BMWnation
BMWnation's Avatar
United_States
425
Rep
514
Posts

Drives: 335i, 535, M4
Join Date: Apr 2006
Location: Bergen NJ

iTrader: (1)

I assume the video has the stock down pipes?
Appreciate 0
      03-15-2023, 10:19 PM   #22
FISH22
Colonel
FISH22's Avatar
United_States
5379
Rep
2,023
Posts

Drives: G80 M3 Competition
Join Date: Apr 2012
Location: Chesapeake, VA

iTrader: (1)

Garage List
2021 BMW M3C  [10.00]
2011 BMW M3  [10.00]
Really excited to see this! Looks perfect and sounds great. I’m sure it’ll sound even better for us that have already ditched the secondaries utilizing other mid pipes.
Appreciate 1
V's M39.00
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 03:47 AM.




g80
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST