[BGM-M3COMP]

Originally Posted by HTTP 410

Try this...
From the home screen, press the ‘CAR’ menu on the left-hand side.

1. Select ‘Settings’
2. Scroll to the right and choose ‘Climate Control’
3. Select ‘Preconditioning/Ventilation’
4. Select ‘Remote Engine Start’
5. Check the box for ‘Starting Engine for Clim. Control’
6. Select ‘OK’ if you agree to the disclaimer

Originally Posted by 'Cane

Have you enabled it in the car settings?

Yes it worked!!!!

Thank you so much!

As soon as this was done, i went in my phone app and it took a minute or 2 to show up but now it's there.

Thanks!

[NightWriter]

Originally Posted by HTTP 410

Installed the Turner carbon fiber strut brace along with BMC filters and removed the charcoal ones.

Looks outstanding! Is there any weight savings or other functional improvements with this brace? Or is it mainly about CF eye candy?

(I assume the factory brace is aluminum? Or is it steel?)

[GregM4]

Originally Posted by HTTP 410

Installed the Turner carbon fiber strut brace along with BMC filters and removed the charcoal ones.

Looks great.

How was the fitment, and also can you confirm it is in gloss and matches the rest of the CF on the car. Appreciate the feedback as thinking of buying this.

[GregM4]

Originally Posted by NightWriter

Looks outstanding! Is there any weight savings or other functional improvements with this brace? Or is it mainly about CF eye candy?

(I assume the factory brace is aluminum? Or is it steel?)

Any improvement over the stock brace would be an improvement IMO. The weld quality I have seen to date I feel does not match the quality of the rest of the car.

[HTTP 410]

Originally Posted by NightWriter

Looks outstanding! Is there any weight savings or other functional improvements with this brace? Or is it mainly about CF eye candy?

(I assume the factory brace is aluminum? Or is it steel?)

The factory braces are steel. According to Turner, their brace is more rigid and less than half the weight of stock.

[HTTP 410]

Originally Posted by GregM4

Looks great.

How was the fitment, and also can you confirm it is in gloss and matches the rest of the CF on the car. Appreciate the feedback as thinking of buying this.

Thanks. It fit perfectly and it's a gloss finish. I didn't compare the weave of the brace to the other carbon bits that I have mainly because it never crossed my mind to do so. That and the fact that only the carbon front lip and brace can be seen together, I suppose it doesn't really matter. I can say that I can't tell a difference by looking at them.

Check out this video by NCG80M3 of him installing it on his G80 - https://www.youtube.com/watch?v=GOoqw0FdPuI

HTH

[Patton250]

Carbon fiber side rockers added today. Soon the front lip.

[BMWRacer523]

Looking sharp Patton250 Going to delete those reflectors?

[Dhillon63]

Originally Posted by Patton250

Carbon fiber side rockers added today. Soon the front lip.

Skyscraper? My build is the exact same, with fiona red carbon buckets. Still waiting for it 🧐

[NKGK20]

Washed, Vic55

[Patton250]

Originally Posted by BMWRacer523

Looking sharp Patton250 Going to delete those reflectors?

I’m not sure. Whats the best way?

[Patton250]

Originally Posted by Dhillon63

Skyscraper? My build is the exact same, with fiona red carbon buckets. Still waiting for it 🧐

I have Fiona red also. My favorite.

[BMWRacer523]

Originally Posted by Patton250

I’m not sure. Whats the best way?

https://ind-distribution.com/product...smetic-package

[GregM4]

Originally Posted by HTTP 410

Thanks. It fit perfectly and it's a gloss finish. I didn't compare the weave of the brace to the other carbon bits that I have mainly because it never crossed my mind to do so. That and the fact that only the carbon front lip and brace can be seen together, I suppose it doesn't really matter. I can say that I can't tell a difference by looking at them.

Check out this video by NCG80M3 of him installing it on his G80 - https://www.youtube.com/watch?v=GOoqw0FdPuI

HTH

Thanks for the feedback and link to the video. I am thinking that this may be the one.

[Sedan_Clan]

Originally Posted by Custom Install

Poor res picture (off my Cctv) but the R44 kit adds some presence to my car.

Your car looks sick.

[Sedan_Clan]

Originally Posted by HTTP 410

Installed the Turner carbon fiber strut brace along with BMC filters and removed the charcoal ones.

[IMG]https://www.brianbuff.com/pics/m3/turnerbrace.jpg[/IMG]

That is a cool brace. Nice touch to the engine bay.

[KylianHamilton]

Nothing I’ve done to the car but had my first damage today… Someone’s bike lamp which had been held on by tape. Break-in-service this friday hope they’ll have the parts soon enough. Never had any damage done this quickly😅
Must add that I didn’t notice anything until I parked the car in the garage.

[Patton250]

Originally Posted by BMWRacer523

https://ind-distribution.com/product...smetic-package

Yes I saw that a couple months ago. $300 for two small pieces of plastic. It has me rethinking my career. Do you want to go into business to create small pieces of plastic that cost $.19 each and sell them for $300?

[AhsanU]

Originally Posted by Patton250

Yes I saw that a couple months ago. $300 for two small pieces of plastic. It has me rethinking my career. Do you want to go into business to create small pieces of plastic that cost $.19 each and sell them for $300?

In this world where NFT's generate millions of dollars, and people earn money on twitch just eating food or licking microphones - $150 for a pair of painted front reflectors isn't the worst. Besides, you're also paying for iND quality and paint matching. It's relatively expensive when you think of it in terms of it just being pieces of plastic, but there is, of course, much more to it than that.

[barryc365]

Originally Posted by Patton250

Yes I saw that a couple months ago. $300 for two small pieces of plastic. It has me rethinking my career. Do you want to go into business to create small pieces of plastic that cost $.19 each and sell them for $300?

The rears are not worth it but the fronts are 100% worth the money. They're paint matched perfectly.
Amazing quality and really cleans up the front quarter

[Patton250]

Originally Posted by AhsanU

In this world where NFT's generate millions of dollars, and people earn money on twitch just eating food or licking microphones - $150 for a pair of painted front reflectors isn't the worst. Besides, you're also paying for iND quality and paint matching. It's relatively expensive when you think of it in terms of it just being pieces of plastic, but there is, of course, much more to it than that.

It says $294.95 not $150

https://ind-distribution.com/product...smetic-package

['Cane]

Originally Posted by Patton250

It says $294.95 not $150

https://ind-distribution.com/product...smetic-package

That's for the kit (front/back). The front only is $149.50:
https://ind-distribution.com/collect...-reflector-set