I used Gyeon Q2 on my CSL wheels, which may have a similar finish to the 1000M wheels. I've only cleaned them once so far, but just using a damp rag got them back to looking perfect. The coating doesn't change the satin look at all.
After the first wheel, it was fairly easy to do…just takes time to get into all the facets. Wear gloves!
I would 100% recommend doing this with new wheels before mounting tires. If you have to clean/prep the wheels first it will be 1000 times harder.
https://g80.bimmerpost.com/forums/sh...1&postcount=94