Quote:
Originally Posted by SYT_Shadow
The ZF is limited to 7200rpm, so they also limited the 6MT to 7200.
Obviously the day there is a tune you can allow the 6MT to go to 7500.
|
Actually...
The G8x Manual Trans (An in-house manufactured licensed version of the Getrag 6MTI550) is adapted to match the ZF 8HP; an increase in maximum input speed to 7200rpm, or +200rpm from the normal 7000rpm of the MTI550. Absolute Torque limit (based on required service life) is 580nm but not above 5000rpm input.