|
Installed mine last night. Backed car onto ramps, took a straightened coat hanger and taped the plugs of the longer wire to the end. Pushed through space on top of heat shield until it came out other side. Unwrapped tape and plugged in the passenger side valve connections, tucking wires above and behind valve controller. There is less than 2-3 inches of slack so they don't really hang down. Repeated on drivers side and bolted controller to the top valve bolt. Tucked wires again. Drove car off ramps and then programmed 2 of my mirror buttons to be Open/Auto (mine is set to start at default "auto" functionality). Enjoying louder exhaust at the touch of a button, elapsed time maybe 15mins.
|