Thread: Jb4 Map 6
View Single Post
      10-21-2021, 06:58 PM   #15
GabbyChaves
Enlisted Member
GabbyChaves's Avatar
United_States
61
Rep
32
Posts

Drives: Bmw M4
Join Date: Jul 2021
Location: Indianapolis, IN

iTrader: (0)

Quote:
Originally Posted by corbs09 View Post
Quote:
Originally Posted by GabbyChaves View Post
Guys I can confirm, my Map 6 is not running 23 psi over stock 😅
Logs confirm it is acting as a boost based actual target, and actually for the most part is under target about .5 thru out the rev range.
Interesting.. I figured as much but their documentation is off then. What PSI is your car actually running above 5.5k rpm? I am curious what these will hit on stock turbos.
About 22 psi,

West gate duty cycle is a great indicator of how hard the turbo is working. It is very sensitive to air temps and altitude. My car at 1000ft above sea level and 80 degrees sees about 70% WGDC at 6500rpm with actual boost value of 22psi
Typically the higher the rpms, the harder the turbo works to achieve the same target so I can't see why with the right condition and in a nicer lower range around 5k rpm why it wouldn't spool close to 30psi at or above 100% wgdc
Attached Images
 
Appreciate 0