|
I attempted to install MAD catted downpipes and single mid pipe on Friday. I am current stuck on a few things.
1. I cannot tighten the bolt from the small downpipe to the midpipe. I will be purchasing a flex head wrench and see if that works.
2. The midpipe hangs to low and is only aabout 1/10 of an inch from the cross brace. I will loosen everthing and see if I can push it up more and tighten. Ill place something between the brace and the midpipe to give clearance first.
3. I cannot determine when the lower O2 sensor should be secured to the body. It is currently just hang from the connections. (A friend took it off).
|