Quote:
Originally Posted by hotsauce_bukkake
Okay guys I’m at a loss. The only write up/video for the engine mount kit is on the B58 in the A90 Supra. According to this video, I remove the fitting from the inlet on the fuel pump, disconnect the hard fuel line, replace with the flexible line included in the kit and connect the sensor between the factory flex line and the flex line I just connected. EZPZ.
Except, as you know our S58 has two fuel pumps, and where the instructions say to remove the line, we have a splitter that feeds both the fuel pumps. I’m kinda starting to wonder if maybe they sent me the wrong kit and the S58 configuration should be connected on the fuel line side next to the DME with two new flex hoses.
Any insight is much appreciated.
|
I had the exact same questions. Please see my solution on another thread.
https://g80.bimmerpost.com/forums/sh...&postcount=111