Hey guys,
Wanted to share recent work on our G80. This is our stage 3 build consisting of the following.
- 60-130: 4.42s
- 0-130mph: 7.05s
- 100-150mph: 4.84s
- 1/4 mile: 9.42s @143mph
- 1/2 mile: 15.65s @180mph
- 100-200kph: 3.69s
Tires: Michelin ps4s
Fuel: Ignite E85
Tuner: UTKUnoaPerformance and CedarPerformance
Weight reduction: Front pass seat
The 1/4 the car has a lot more in it, I went out not expecting it to go this fast lol. I hit the brakes rather hard because my stretch of road curves hard at the end. Will go back once my 18" wheels/tires arrive. 60ft should come down significantly and I see the car being 9.0-9.1s car with a 60ft of around 1.4-1.45s. coupled with not lifting at the end. So far its trapping 152-154 consistently if I stay in it.
We've done just about everything possible to this car, we will be adding a 100 shot with the wheels/tires when they arrive. Full frame G25-660 are in the works as well.
- RK Forged Engine consisting of
- Arrow forged rods
- CP forged pistons
- Darton Sleeves
- RK fire rings
- RK blueprinting
- RK head studs
- Frankenstein CNC ported heads
- Valve springs, retainers, & keepers
- Inconel valves
- RK Stage 2 turbos with inlets
- RK Billet port injection manifold
- RK standalone fuel system with surge tank
- RK port injection system
- RK primary downpipes
- RK secondary downpipes
- Pure drivetrain stage 2 trans with convertor
- Eventuri intakes
All of the tuning was provided by UtkuNoaPerformance and Cedartuning in dallas. Please contact them for your tuning needs, they can assist with anything from stage 1 to stage no budget.
Thanks
-R