Quote:
Originally Posted by Soylent
Anyone have any issue with the X-pipe coming into contact with the aluminum cross/skid plate? My midpipe was causing a lot of vibration/resonating at low rpm. Tried loosening all the clamps an getting it higher but no dice. Not making any noise now but I may have to put a piece of heat tolerant rubber between the two or have a custom hanger made. The X-pipe is not upside down.
|
Quote:
Originally Posted by TexasEd
I removed the cross/skid plate while installing my PSI midpipe. It would not re-attach after installing the midpipe. I left it off.
|
You can space the plate down with 1-2 washers to create more clearance, but we originally designed the pipe for the brace to be used just like it is OEM. Sometimes the stainless will expand and contract enough and change that clearance.
Please email us pics so I can look at that with my fab guys. If the pipe hits that brace after all adjustments we will swap it out if you would like to do so.
sales@precision-sport.com
Let me know as we are here to help!