|
Did the Park Assist work after coding and testing with the new seats and only appeared AFTER you removed the seat and moved the car with it disconnected? Are there modules or cables that were disconnected when this happened? It’s possible something wasn’t plugged back in right. It’s also possible seat belt latching necessary for park assist to work now since other sensors aren’t in the seat anymore, like occupancy, etc.
If everything truly is plugged in right and no issues, I would try a complete power cut on the car (remove battery power from it for 2 min) and then plug it back in. Then see where you’re at as this would totally power cycle all modules in the car and start fresh. This won’t mess with your coding you’ve done, so you shouldn’t have to worry about that. If for some reason any modules complain about anything, doing a full code clearing via software after reconnecting the battery should clear that all up. If you still have issues after this, then either something physically changed when you messed with the new seat (maybe pinched wire or something) or testing to make sure all your systems worked wasn’t done after the seat install after coding and this is simply a feature you ran into that won’t work due to this.
The only car that has racing buckets in it without any sensors is the CSL and that car doesn’t have park assist because it doesn’t have the surround cameras, so maybe is coding was done to match that, maybe that’s why the function is failing now. 🤷*♂️
|