Quote:
Originally Posted by chris3g
My memory on idrive 7 is a little hazy at this point but as I recall you can set MDM mode by pressing the physical traction control button, or you can long hold it to get DSC off. You can also configure MDM or DSC off in your m1/m2 presets and then you can enable it by triggering the m1 or m2 mode from the buttons.
I don’t believe that bmw specifically quantifies how much intervention there is beyond “less” and “later” as compared to DSC ON.
|
There should also be a traction control item when you press the "setup" button, but there isn't which leads to confusion. chris3g is spot on in their responses to you. Before switching to 4WD Sport or 2WD, you need to turn off DSC completely or put in MDM. There is a traction control button near the gear shift. A short press toggles between fully on and MDM. If you hold it down for a few sec, it turns it completely off.
Your conclusion is mostly correct. If you think you'll ever go into 2wd mode, I think M Drive Professional is a good option to add.